|
|
Número de pieza | MT1103 | |
Descripción | Hall-Effect Magnetic Position Sensors | |
Fabricantes | MagnTek | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MT1103 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! MT1103 Series
CMOS, Uni-polar, Hall-Effect Magnetic Position Sensors
Features and Benefits
CMOS Technology
Magnetic Type: Uni-polar
Wide Operating Voltage Range:
Supply Voltage 2.8~24V
℃ ℃Specified Operating Temperature Range:
From –40 ~125
Magnetic Sensitivity
Bop=120Gauss, Brp=90Gauss (typical)
Lower Power Consumption
Supply Current <3mA (typical)
Lead Free Package
SIP-3, SOT-23, SOT-89B
High ESD Rating
Open Drain Output
RoHS Compliant
2011/65/EU
Applications
Automotive, Home appliances, Industrial
Speed Detection
Position Detection
Magnetic Encoder
Solid-State Switch
Proximity Switch
Family Members
Part number
MT1103A
MT1103A-T
MT1103AT
MT1103BT
MT1103ET
Description
Flat TO-92 package, bulk packaging (1000pcs/bag)
Flat TO-92 package, Radial lead, bulk packaging (1000pcs/bag)
SOT-23 package, tape and reel packaging (3000pcs/bag)
SOT-89B package, tape and reel packaging (1000pcs/bag)
SOT-23(thin outline) package, tape and reel packaging (3000pcs/bag)
General Description
The MT1103 family, produced with CMOS technology, The Hall IC internally includes an on-chip Hall
voltage generator, a voltage regulator for operation with supply voltages of 2.8 to 24V, temperature
compensation circuitry, small-signal amplifier, Hall sensor with dynamic offset cancellation system,
Schmitt trigger and an open-drain output.
They are designed to respond to a single pole: North (AT) or South (A, BT and ET). While the magnetic
flux density(B) is larger than operate point (Bop), the output will be turned on (Low), while the magnetic
flux density(B) is lower than release point (Brp), then turn off (High).
The MT1103 family provides a variety of packages to customers: SOT-23/SOT-89B for surface mount and
TO-92 flat for through-hole mount. All packages are RoHS compliant.
www.magntek.de
Rev.5 12/2014
01/10
1 page MT1103 Series
CMOS, Uni-polar, Hall-Effect Magnetic Position Sensors
Typical Application Circuit
Rv
VS
100ohm
100nf
VDD
MT1103OUT
GND
RL
10K
20pf
Typical Output Waveform (The TO-92 package as an example )
B
Magnetic Field
BOP
BRP
V
High
Digital Output
Low
www.magntek.de
Rev.5 12/2014
05/10
T
T
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet MT1103.PDF ] |
Número de pieza | Descripción | Fabricantes |
MT110 | Thyristor Modules | TECHSEM |
MT1102 | Hall-Effect Magnetic Position Sensors | MagnTek |
MT1102A | Hall-Effect Magnetic Position Sensors | MagnTek |
MT1102A-T | Hall-Effect Magnetic Position Sensors | MagnTek |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |