|
|
PDF LV8019V Data sheet ( Hoja de datos )
| Número de pieza | LV8019V | |
| Descripción | Bi-CMOS IC Forward/Reverse Motor Driver | |
| Fabricantes | Sanyo Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LV8019V (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
Ordering number : ENA0724
www.DataSheet4U.com
Bi-CMOS IC
LV8019V Forward/Reverse Motor Driver
Overview
The LV8019V is a forward/reverse motor driver.
Features
• One H-bridge driver channel
• Provides a constant current output
• Built-in thermal shutdown circuit
Specifications
Maximum Ratings at Ta = 25°C and SGND = PGND = 0V
Parameter
Output block supply voltage
Control block supply voltage
Constant current output block
supply voltage
Maximum output current
Input signal voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VM max
VCC max
VRG max
IO max
IO peak1
IO peak2
VIN max
Pd max
Topr
Tstg
Conditions
t ≤ 200ms, f = 2Hz
t ≤ 10ms, f = 2Hz
When mounted on a circuit board *1
*1 Specified circuit board : 114.3 × 76.1 × 1.6mm3, glass epoxy
Ratings
-0.5 to 8.4
-0.5 to 7.0
-0.5 to 6.0
1.0
3
5
-0.5 to VCC+0.5
0.8
-30 to +85
-55 to +150
Unit
V
V
V
A
A
A
A
W
°C
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
30707 MS PC 20070219-S00003 No.A0724-1/6
1 page  
LV8019V
Pin Functions
Pin No.
13
14
Pin
IN1
IN2
Description
Logic input 1
Logic input 2
The output is set by the combination of the input 1
and 2 states. See the truth table for details.
12 ICTRL Controls the output on/off state of the constant
current block.
VCC
IN1
IN2
ICTRL
S-GND
15 EN EN pin.
Controls the on/off state of the H-bridge output
(OUT1 and OUT2) and the constant current output.
See the truth table for details.
VCC
EN
7 OUT1 Output 1.
2 OUT2 Output 2.
The source side is a p-channel transistor and sink
side is an n-channel transistor.
S-GND
www.DataSheet4U.com
Equivalent circuit
10kΩ
10kΩ
200kΩ
VM
OUT*
10 CC Constant current output.
11 ISET Constant current setting.
The output current (CC) is set by connecting a
resistor between the ISET pin and ground.
9
VCC
Signal system power supply.
8 VM Power system power supply.
16 SGND Signal system ground.
4,5 PGND Power system ground.
VCC
VM
SGND
PGND
PGND
VCC
CC
SGND
VCC
ISET
SGND
No.A0724-5/6
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet LV8019V.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LV8019LP | Bi-CMOS IC Forward/Reverse Motor Driver | Sanyo Semiconductors |
| LV8019LP | Forward/Reverse Motor Driver |  ON Semiconductor |
| LV8019V | Bi-CMOS IC Forward/Reverse Motor Driver | Sanyo Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |