|
|
PDF SL13 Data sheet ( Hoja de datos )
| Número de pieza | SL13 | |
| Descripción | LOW VF SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER | |
| Fabricantes | General Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SL13 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
SL12 AND SL13
LOW VF SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
Reverse Voltage - 20 to 30 Volts
Forward Current - 1.0 Ampere
DO-214AC
0.065 (1.65)
0.049 (1.25)
0.110 (2.79)
0.100 (2.54)
0.090 (2.29)
0.078 (1.98)
0.177 (4.50)
0.157 (3.99)
0.012 (0.305)
0.006 (0.152)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203) MAX.
0.208 (5.28)
0.194 (4.93)
Dimensions in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability classification 94V-0
♦ For surface mount applications
♦ Low profile package
♦ Built-in strain relief
♦ Metal silicon junction, majority carrier conduction
♦ Low power loss, high efficiency
♦ High current capability, low forward voltage drop
♦ High surge capability
♦ For use in low voltage high frequency inverters, free
wheeling, and polarity protection applications
♦ Guardring for overvoltage protection
♦ High temperature soldering guaranteed:
250°C/10 seconds on terminals
MECHANICAL DATA
Case: JEDEC DO-214AC molded plastic body
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Weight: 0.002 ounce 0.064 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
R. atings at 25°C ambient temperature unless otherwise specified.
Device marking code
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current (NOTE 2)
at TL (SEE FIG. 1)
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Maximum instantaneous forward voltage at:
(NOTE 1)
IF=0.1A, TA=125°C
IF=0.1A, TA=25°C
IF=1.0A, TA=125°C
IF=1.0A, TA=25°C
Maximum DC reverse current (NOTE 1) TA=25°C
at rated DC blocking voltage
TA=100°C
Typical thermal resistance (NOTE 2)
Operating junction temperature range
Storage temperature range
NOTES:
(1) Pulse test: 300µs pulse width, 1% duty cycle
(2) P.C.B. mounted with 0.2 x 0.2” (5.0 x 5.0mm) copper pad areas
SYMBOLS
VRRM
VRMS
VDC
I(AV)
IFSM
VF
IR
RΘJA
RΘJL
TJ
TSTG
SL12
L2
20
14
20
SL13
L3
30
21
30
1.0
50
0.230
0.360
0.340
0.445
0.2
6.0
88
28
-55 to +125
-55 to +150
UNITS
Volts
Volts
Volts
Amps
Amps
Volts
mA
°C/W
°C
°C
4/98
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet SL13.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SL100 | Silicon Transistors |  Semiconductors |
| SL100 | 50V, 0.5A, NPN Transistor, TO-39 |  Teamasia |
| SL100 | NPN Power Transistor |  Teamasia Lakhi Semiconductors |
| SL1000 | Fast Recovery / High Voltage / Miniature Rectifiers |  Electronic Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |