|
MAX809 даташитФункция этой детали – «Very Low Supply Current 3-pin MICroprocessor Reset Monitors». |
Показать результаты поиска |
Номер в каталоге | Производители | Описание | |
MAX809 | ON Semiconducto |
Very Low Supply Current 3-Pin Microprocessor Reset Monitors MAX809 Series, MAX810 Series Very Low Supply Current 3-Pin Microprocessor Reset Monitors
The MAX809 and MAX810 are cost–effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven active within 10 µsec of V CC falling through the reset voltage threshold. Reset is maintained active for a minimum of 140 msec after V CC rises above the reset threshold. The MAX810 has an act |
|
MAX809 | ON |
3-Pin Microprocessor Reset Monitors MAX809, MAX810 3-Pin Microprocessor Reset Monitors
The MAX809 and MAX810 are cost–effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven active within 20 µsec of VCC falling through the reset voltage threshold. Reset is maintained active for a minimum of 140msec after VCC rises above the reset threshold. The MAX810 has an active–high RESET output while the MAX809 |
|
MAX809 | NXP Semiconductors |
(MAX809 / MAX810) 3-pin microprocessor resets INTEGRATED CIRCUITS
MAX809/MAX810 3-pin microprocessor resets
Product data Supersedes data of 2002 Oct 21 2003 Aug 08
Philips Semiconductors
Philips Semiconductors
Product data
3-pin microprocessor resets
MAX809/MAX810
DESCRIPTION
The MAX809/MAX810 are single function microprocessor resets used to monitor supply voltages in microprocessor and other logic systems. They provide a reset signal to the microprocessor during power-up, power-down, and brownout conditions. The reset signal is asserted when the supply vol |
|
MAX809J | Maxim Integrated |
3-Pin Microprocessor Reset Circuits 19-0344; Rev 4; 12/99
3-Pin Microprocessor Reset Circuits
General Description
The MAX803/MAX809/MAX810 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5V, +3.3V, +3.0V, or +2.5V-powered circuits. These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, keeping |
|
MAX809L | Maxim Integrated |
3-Pin Microprocessor Reset Circuits |
|
MAX809M | Maxim Integrated |
3-Pin Microprocessor Reset Circuits |
|
MAX809R | Maxim Integrated |
3-Pin Microprocessor Reset Circuits |
|
MAX809S | Maxim Integrated |
3-Pin Microprocessor Reset Circuits |
[1]  [2]
Последние обновления
Номер в каталоге | Производители | Описание | |
2N3904 | Unisonic Technologies |
Это популярный биполярный переходной транзистор (BJT), обычно используемый в электронных схемах. Транзистор NPN с максимальным номинальным током 200 мА и максимальным номинальным напряжением 40 В. |
|
NE555 | ST Microelectronics |
Это широко используемая интегральная схема таймера (ИС), которую можно использовать для генерирования сигналов с точной временной задержкой, колебаний и широтно-импульсной модуляции (ШИМ). |
DataSheet26.com | 2020 | Контакты |