DataSheet26.com


MAX1482 даташит

Функция этой детали – «Slew-rate-limited Rs-485 Transceivers».



Показать результаты поиска

scroll
Номер в каталоге Производители Описание PDF
MAX1482 Maxim Integrated
Maxim Integrated
  Slew-Rate-Limited RS-485 Transceivers

19-0367; Rev 1; 5/06 MAX1482/MAX1483 20µA, 1⁄8-Unit-Load, Slew-Rate-Limited RS-485 Transceivers _______________General Description The MAX1482 and MAX1483 are low-power transceivers for RS-485 and RS-422 communication. Both feature slew-rate-limited drivers that minimize EMI and reduce reflections caused by improperly terminated cables. Data rates are guaranteed up to 250kbps. The MAX1482/MAX1483 draw only 20µA of supply current. Additionally, they have a low-current shutdown mode that consumes only 0.1µA. Both
pdf
MAX14820 Maxim Integrated
Maxim Integrated
  IO-Link Device Transceiver

EVALUATION KIT AVAILABLE MAX14820 IO-Link Device Transceiver General Description The MAX14820 transceiver is suitable for IO-Link® devices and 24V binary sensors/actuators. All specified IO-Link data rates are supported. In IO-Link applications, the transceiver acts as the physical layer interface to a microcontroller running the data-link layer protocol. Additional 24V digital inputs and outputs are provided. Two internal linear regulators generate common sensor and actuator power requirements: 5V and 3.3V. On-boar
pdf
MAX14821 Maxim Integrated
Maxim Integrated
  IO-Link Device Transceiver

MAX14821 IO-Link Device Transceiver General Description The MAX14821 transceiver is suitable for IO-Link® devices and 24V binary sensors/actuators. All specified IO-Link data rates are supported. In IO-Link applications, the transceiver acts as the physical layer interface to a microcontroller running the data-link layer protocol. Additional 24V digital inputs and outputs are provided. Two internal linear regulators generate common sensor and actuator power requirements: 5V and 3.3V. On-board C/Q and DO drivers are i
pdf
MAX14824 Maxim Integrated
Maxim Integrated
  IO-Link Master Transceiver

19-5788; Rev 3; 5/12 EVALUATION KIT AVAILABLE MAX14824 IO-Link Master Transceiver General Description The MAX14824 is an IO-LinkM master interface that integrates an IO-Link physical layer transceiver with an auxiliary digital input and two linear regulators. High port count IO-Link master applications are supported through in-band SPI addressing, and the 12MHz SPI interface minimizes host controller access times. In-band addressing and selectable SPI addresses enable cascading up to 16 devices. The device supports all
pdf
MAX14826 Maxim Integrated
Maxim Integrated
  IO-Link Device Transceiver

MAX14826 IO-Link Device Transceiver General Description The MAX14826 transceiver is suitable for IO-Link® devices and 24V binary sensors. All specified IO-Link data rates are supported. In IO-Link applications, the transceiver acts as the physical layer interface to a microcontroller running the data-link layer protocol. Additional 24V digital inputs and outputs are provided. Two internal linear regulators generate common sensor and actuator power requirements: 5V and 3.3V. On-board C/Q and DO drivers are independent
pdf
MAX14827 Maxim Integrated
Maxim Integrated
  IO-Link Device Transceiver

MAX14827 EVALUATION KIT AVAILABLE IO-Link Device Transceiver General Description The MAX14827 integrates the high-voltage functions commonly found in industrial sensors, including drivers and regulators. The MAX14827 features two ultra lowpower drivers with active reverse-polarity protection. Operation is specified for normal 24V supply voltages up to 60V. Transient protection is simplified due to high voltage tolerance allowing the use of micro TVS. The device features a flexible control interface. Pincontrol logic i
pdf
MAX14827A Maxim Integrated
Maxim Integrated
  IO-Link Device Transceiver

EVALUATION KIT AVAILABLE MAX14827A Low-Power, Ultra-Small, Dual Driver, IO-Link Device Transceiver General Description The MAX14827A integrates the high-voltage functions commonly found in industrial sensors, including drivers and regulators. The MAX14827A features two ultra lowpower drivers with active reverse-polarity protection. Operation is specified for normal 24V supply voltages up to 60V. Transient protection is simplified due to high voltage tolerance allowing the use of micro TVS. The device features a flexi
pdf

[1]   



Последние обновления

scroll
Номер в каталоге Производители Описание PDF
2N3904 Unisonic Technologies
Unisonic Technologies

Это популярный биполярный переходной транзистор (BJT), обычно используемый в электронных схемах. Транзистор NPN с максимальным номинальным током 200 мА и максимальным номинальным напряжением 40 В.

pdf
NE555 ST Microelectronics
ST Microelectronics

Это широко используемая интегральная схема таймера (ИС), которую можно использовать для генерирования сигналов с точной временной задержкой, колебаний и широтно-импульсной модуляции (ШИМ).

pdf

Index :   

A    B    C    D    E    F    G    H    I    J  

  K    L    M    N    O    P    Q

DataSheet26.com      |     2020      |     Контакты