|
AN75 даташитФункция этой детали – «High Power Factor Led Replacement T8 Fluorescent Tube». |
Показать результаты поиска |
Номер в каталоге | Производители | Описание | |
AN75 | Diodes |
High Power Factor LED Replacement T8 Fluorescent Tube using the AL9910 High Voltage LED Controller AN75 AN75
High Power Factor LED Replacement T8 Fluorescent Tube using the AL9910 High Voltage LED Controller
Yong Ang, Diodes Inc.
Introduction
This application note describes the principles and design equations required for the design of a high brightness LED lamp using the AL9910. The equations are then used to demonstrate the design of a universal, offline, high power factor (PF), 13W LED lamp suitable for use as the replacement for T8 fluorescent tube. A complete design including the electrical diagram, component l |
|
AN7500FHQ | Panasonic Semiconductor |
aUDIO SIGNAL PROCESSING ic FOR 1.5 v HEADPHONE STEREO ICs for Radio-Cassette, Cassette Deck
AN7500FHQ
Audio signal processing IC for 1.5 V headphone stereo
s Overview
The AN7500FHQ is a single chip IC optimum for a 1.5 V headphone stereo system including pre-amp., power amp. and Dolby B type noise reduction circuit. Current consumption in a Dolby circuit off mode has been drastically reduced and an operating supply voltage has also been lowered to 0.98 V. Much fewer external components have been realized due to an integration of audio signal processing system into a singl |
|
AN7510 | Panasonic Semiconductor |
BTL Audio Power IC New
BTL Audio Power IC AN7510/7520 Series
s Overview
The AN7510/7520 series is a 0.5W to 3W BTL audio power amplifier IC. Equipped with a standby function and mute or DC volume circuit, the series includes a lineup of single and dual output models. With simplified set design due to minimum external components, this IC has a wide variety of applications.
s Features
• Operating power sourcs voltage: 3.0V to 13.5V. • Built-in standby function. • Built-in mute or DC volume circuit.
s Specifications
Parameters Produ |
|
AN7510S | Panasonic Semiconductor |
BTL Audio Power IC |
|
AN7511 | Panasonic Semiconductor |
1-W BTL audio power amplifier ICs for Audio Common Use
AN7511, AN7511S
1-W BTL audio power amplifier
I Overview
The AN7511 and AN7511S are the audio power amplifier ICs with 1-ch output. The BTL (Balanced Transformer-Less) method can provide fewer external parts and more easy design for applications. AN7511
1 8
Unit: mm
0.9 1.0
9.2±0.2
4 6.4±0.2
5 3.35±0.20
I Features
• 1-W output (8 Ω) with supply voltage of 5 V: AN7511 • 0.5-W output (16 Ω) with supply voltage of 5 V: AN7511S • On-chip standby function • On-chip muting functio |
|
AN7511 | Panasonic Semiconductor |
BTL Audio Power IC |
|
AN7511S | Panasonic Semiconductor |
BTL Audio Power IC New
BTL Audio Power IC AN7510/7520 Series
s Overview
The AN7510/7520 series is a 0.5W to 3W BTL audio power amplifier IC. Equipped with a standby function and mute or DC volume circuit, the series includes a lineup of single and dual output models. With simplified set design due to minimum external components, this IC has a wide variety of applications.
s Features
• Operating power sourcs voltage: 3.0V to 13.5V. • Built-in standby function. • Built-in mute or DC volume circuit.
s Specifications
Parameters Produ |
|
AN7511S | Panasonic Semiconductor |
1-W BTL audio power amplifier |
Последние обновления
Номер в каталоге | Производители | Описание | |
2N3904 | Unisonic Technologies |
Это популярный биполярный переходной транзистор (BJT), обычно используемый в электронных схемах. Транзистор NPN с максимальным номинальным током 200 мА и максимальным номинальным напряжением 40 В. |
|
NE555 | ST Microelectronics |
Это широко используемая интегральная схема таймера (ИС), которую можно использовать для генерирования сигналов с точной временной задержкой, колебаний и широтно-импульсной модуляции (ШИМ). |
DataSheet26.com | 2020 | Контакты |