|
|
PDF CPH3114 Data sheet ( Hoja de datos )
| Número de pieza | CPH3114 | |
| Descripción | DC/DC Converter Applications | |
| Fabricantes | Sanyo Semicon Device | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CPH3114 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Ordering number:ENN6394
PNP/NPN Epitaxial Planar Silicon Transistors
CPH3114/CPH3214
DC/DC Converter Applications
Applications
· Relay drivers, lamp drivers, motor drivers.
Features
· Adoption of MBIT processes.
· Large current capacitance.
· Low collector-to-emitter saturation voltage.
· High-speed switching.
· Ultrasmall package facilitates miniaturization in end
products (mounting height : 0.9mm).
· High allowable power dissipation.
Package Dimensions
unit:mm
2150A
[CPH3114/CPH3214]
2.9
0.4
0.15
3
0.05
12
1.9
Specifications
( ) : CPH3114
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Base Current
Collector Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
ICP
IB
PC
Tj
Tstg
Electrical Characteristics at Ta = 25˚C
Conditions
Mounted on a ceramic board (600mm2×0.8mm)
Parameter
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
Output Capacitance
Marking : CPH3114 : AP, CPH3214 : CP
Symbol
Conditions
ICBO
IEBO
hFE
VCB=(–)12V, IE=0
VEB=(–)4V, IC=0
VCE=(–)2V, IC=(–)100mA
fT VCE=(–)2V, IC=(–)300mA
Cob VCB=(–)10V, f=1MHz
1 : Base
2 : Emitter
3 : Collector
SANYO : CPH3
Ratings
(–)15
(–)15
(–)5
(–)1.5
(–)3
(–)300
0.9
150
–55 to +150
Unit
V
V
V
A
A
mA
W
˚C
˚C
Ratings
min typ max
Unit
(–)0.1 µA
(–)0.1 µA
200 560
(350)
MHz
450 MHz
(17)9
pF
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
70500TS (KOTO) TA-2786 No.6394–1/5
1 page  
CPH3114/CPH3214
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of July, 2000. Specifications and information herein are subject to
change without notice.
PS No.6394–5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet CPH3114.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CPH3110 | DC/DC Converter Applications | Sanyo Semicon Device |
| CPH3112 | DC/DC Converter Applications | Sanyo Semicon Device |
| CPH3114 | DC/DC Converter Applications | Sanyo Semicon Device |
| CPH3114 | Bipolar Transistor |  ON Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |