|
|
PDF B101UAN01.7 Data sheet ( Hoja de datos )
| Número de pieza | B101UAN01.7 | |
| Descripción | Color TFT-LCD | |
| Fabricantes | AUO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de B101UAN01.7 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Product Specification
AU OPTRONICS CORPORATION
( V ) Preliminary Specifications
( ) Final Specifications
Module
Model Name
Note
10.1” WUXGA 16:10 Color TFT-LCD with LED Backlight design
B101UAN01.7_H/W 1A
LED Backlight with driving circuit design
Customer
Date
Approved by
Date
Checked &
Approved by
Date
Note: This Specification is subject to change
without notice.
Trista Chiang
2013/06/07
Prepared by
Erica YT Lin
2013/06/07
MPBU Marketing Division
AU Optronics corporation
B101UAN01.7_H/W 1A_Document Version : 0.8
1 of 36
Studio Technology Co. Ltd. ( www.yslcd.com.tw )
1 page  
Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt
the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example),
do not twist nor bend the TFT Module even momentary. At designing the enclosure, it
should be taken into consideration that no bending/twisting forces are applied to the TFT
Module from outside. Otherwise the TFT Module may be damaged.
12)Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
13)Disconnecting power supply before handling LCD modules, it can prevent electric shock, DO
NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT module that a
LED light bar build in as a light source of back light unit. It can prevent electrostic breakdown.
B101UAN01.7_H/W 1A_Document Version : 0.8
5 of 36
Studio Technology Co. Ltd. ( www.yslcd.com.tw )
5 Page 
Product Specification
AU OPTRONICS CORPORATION
Note 9. Definition of viewing angle
≧Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180°horizontal and 180°
vertical range (off-normal viewing angles). The 180°viewing angle range is broken down as follows; 90°(θ)
horizontal left and right and 90°(Φ) vertical, high (up) and low (down). The measurement direction is typically
perpendicular to the display surface with the screen rotated about its center to develop the desired measurement
viewing angle.
B101UAN01.7_H/W 1A_Document Version : 0.8
11 of 36
Studio Technology Co. Ltd. ( www.yslcd.com.tw )
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet B101UAN01.7.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| B101UAN01.1 | Color TFT LCD Module | AUO |
| B101UAN01.7 | Color TFT-LCD | AUO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |