DataSheet26.com

PTS1206 PDF даташит

Спецификация PTS1206 изготовлена ​​​​«Vishay» и имеет функцию, называемую «Platinum SMD Flat Chip Temperature Sensor».

Детали детали

Номер произв PTS1206
Описание Platinum SMD Flat Chip Temperature Sensor
Производители Vishay
логотип Vishay логотип 

6 Pages
scroll

No Preview Available !

PTS1206 Даташит, Описание, Даташиты
www.vishay.com
PTS Series
Vishay Beyschlag
Platinum SMD Flat Chip
Temperature Sensor
PTS SMD flat chip temperature sensors are the perfect
choice for temperature control of electronics operating
under varying environmental conditions. The highly
controlled platinum thin film manufacturing process
guarantees an outstanding stability of temperature
characteristics which ensures reliable operation even under
harsh conditions.
FEATURES
• Standardized characteristics according to
IEC 60751
• Advanced thin film technology
• Short reaction times down to t0.9 2 s (in air)
• Outstanding stability of temperature
characteristic
• Supports lead (Pb)-free soldering
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Temperature measurement and control in
• Aviation electronics
• Industrial electronics
• Medical electronics
TECHNICAL SPECIFICATIONS
DESCRIPTION
PTS 0603
PTS 0805
Resistance values R0 at 0 °C
Temperature coefficient (0 °C to +100 °C)
100
100 , 500
+3850 ppm/K
Tolerance classes
F0.3, F0.6
Operating temperature range
-55 °C to +155 °C
Long term stability R0/R0;
R0 change after 1000 h at +155 °C
Insulation resistance
< ± 0.04 %
> 10 M
Measurement current
Imeas. (DC) (2)
100
500
1000
0.1 mA to 0.50 mA
-
-
0.1 mA to 1.0 mA
0.1 mA to 0.40 mA
-
Self-heating (1)
Still air
(v = 0 m/s)
0.9 K/mW
0.8 K/mW
Thermal response time (1)
Flowing
water
(v = 0.4 m/s)
Flowing air
(v = 3.0 m/s)
t0.5 0.1 s
t0.9 0.2 s
t0.5 1.0 s
t0.9 2.0 s
t0.5 0.2 s
t0.9 0.3 s
t0.5 1.5 s
t0.9 3.0 s
Notes
(1) Valid for sensor element only
(2) Indicated measurement currents can be applied continuously with self-heating effect of less then 0.1 °C
PTS 1206
100 , 500 , 1000
0.1 mA to 1.0 mA
0.1 mA to 0.40 mA
0.1 mA to 0.25 mA
0.7 K/mW
t0.5 0.3 s
t0.9 0.4 s
t0.5 2.0 s
t0.9 5.0 s
Revision: 08-Jan-15
1 Document Number: 28762
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000









No Preview Available !

PTS1206 Даташит, Описание, Даташиты
www.vishay.com
DIMENSIONS in millimeters
Tt
PTS Series
Vishay Beyschlag
W WT
H
Tb
L
DIMENSIONS - PTS sensor types, mass and relevant physical dimensions
TYPE
PTS 0603
PTS 0805
PTS 1206
H
0.45 + 0.1/- 0.05
0.45 + 0.1/- 0.05
0.55 ± 0.1
L
1.55 ± 0.05
2.0 ± 0.1
3.2 + 0.1/- 0.2
W
0.85 ± 0.1
1.25 ± 0.15
1.6 ± 0.15
WT
> 75 % of W
> 75 % of W
> 75 % of W
Tt Tb
0.3 + 0.15/- 0.2
0.4 + 0.1/- 0.2
0.5 ± 0.25
0.3 + 0.15/- 0.2
0.4 + 0.1/- 0.2
0.5 ± 0.25
MASS
(mg)
1.9
4.6
9.2
SOLDER PAD DIMENSIONS in millimeters
GX
Y
Z
RECOMMENDED SOLDERPAD DIMENSIONS
TYPE
WAVE SOLDERING
GYX
PTS 0603 0.55 1.1
1.1
PTS 0805 0.8 1.25 1.50
PTS 1206 1.4 1.5 1.9
Z
2.75
3.2
4.4
REFLOW SOLDERING
GYXZ
0.65 0.7 0.95 2.05
0.9 0.9 1.4 2.7
1.5 1.15 1.75 3.8
DESCRIPTION
A homogeneous film of platinum is deposited on a high
grade (Al2O3) ceramic substrate and conditioned to achieve
the correct temperature coefficient and stability. The
sensor-elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure matte tin on nickel
plating, the immunity against tin whisker growth has been
proven under extensive testing.
QUALITY
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual sensors. Only accepted products are laid directly
into the paper tape in accordance with IEC 60286-3.
STORAGE
Solderability is specified for 2 years after production or
re-qualification. The permitted storage time is 2 years.
ASSEMBLY
The Pt-sensors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using wave, reflow or vapour phase. The
encapsulation is resistant to all cleaning solvents
commonly used in the electronics industry, including
alcohols, esters and aqueous solutions. The suitability of
conformal coatings, if applied, shall be qualified by
appropriate means to ensure the long-term stability of the
whole system. The use of potting resins in close contact
with the coating or terminations is not allowed. For frequent
high temperature usage, thermal compatible substrates and
solder alloys should be used, to minimize any thermal
mismatch with the component.
All products comply with the CEFIC-EECA-EICTA list of
legal restrictions on hazardous substances.
This includes full compatibility with the following directives:
• 2000/53/EC End of Vehicle life Directive (ELV)
• 2000/53/EC Annex II to End of Vehicle Life Directive
(ELV II)
• 2011/65/EU Restriction of the use of Hazardous
Substances Directive (RoHS)
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
APPROVALS
The Pt-sensors are tested in accordance with
• IEC 60751
• IEC 60068 series
Revision: 08-Jan-15
2 Document Number: 28762
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000









No Preview Available !

PTS1206 Даташит, Описание, Даташиты
www.vishay.com
PTS Series
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION (1)
PART NUMBER (2): PTS060301B100RP100
P T S 0 6 03 0 1 B 1 0 0RP1 0 0
TYPE
3 digits
PTS = Platinum
Temperature
Sensor SMD
SIZE CODE
4 digits
0603
0805
1206
SPECIAL
CHARACTER
1 digit
0 = neutral
TOLERANCE
CLASS
2 digits
1B = class F0.3
2B = class F0.6
RESISTANCE
VALUE
4 digits
100R = 100
500R = 500
1K00 = 1000
PACKAGING (3)
2 digits
PU
P1
SPECIAL
2 digits
00 = standard
PRODUCT DESCRIPTION (4): PTS 0603-B P1 100R
PTS 0603
TYPE
PTS = Platinum
Temperature
Sensor SMD
SIZE CODE
0603
0805
1206
-B
TOLERANCE
CLASS
B = Class F0.3
2B = Class F0.6
P1
PACKAGING (3)
PU
P1
100R
RESISTANCE VALUE
100R = 100
500R = 500
1K = 1000
Notes
(1) Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION
(2) The part number is shown to facilitate the introduction of a unified part numbering system
(3) Please refer to table PACKAGING
(4) We recommend that the Production Description is used to minimize the possibility of errors in order handling
PACKAGING
TYPE
CODE
PTS 0603
PTS 0805
PTS 1206
PU
P1
QUANTITY
100
1000
CARRIER
TAPE
Paper tape acc.
IEC 60286-3
WIDTH
8 mm
PITCH
4 mm
BOX/REEL
Box
Reel
BOX/REEL
DIAMETER
114 mm
180 mm/7"
FUNCTIONAL PERFORMANCE
The temperature resistance relationships of the PTS series
follow different equations:
For the temperature range of -55 °C up to 0 °C:
RT = R0 x (1 + A x T + B x T2 + C x (T - 100 °C) x T3)
And for the temperature range of 0 °C up to +155 °C:
RT = R0 x (1 + A x T + B x T2)
RT: Resistance as a function of temperature
R0: Nominal resistance value at 0 °C
T: Temperature in °C
Coefficients according to IEC 60751:
A = 3.9083 x 10-3 °C-1
B = -5.775 x 10-7 °C-2
C = -4.183 x 10-12 °C-4
The tolerances values of the PTS series are classified by the
following equations as specified by IEC 60751:
Class F0.3: TF0.3 = ± (0.30 + 0.005 x |T|)
Class F0.6: TF0.6 = ± (0.60 + 0.010 x |T|)
Revision: 08-Jan-15
3 Document Number: 28762
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000










Скачать PDF:

[ PTS1206.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
PTS1206Platinum SMD Flat Chip Temperature SensorVishay
Vishay
PTS120615V0506-60 Volt DC Surface MountCooper
Cooper
PTS120616V0256-60 Volt DC Surface MountCooper
Cooper
PTS120616V0356-60 Volt DC Surface MountCooper
Cooper

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск