DataSheet26.com

PTS0805M PDF даташит

Спецификация PTS0805M изготовлена ​​​​«Vishay» и имеет функцию, называемую «Platinum SMD Flat Chip Temperature Sensor».

Детали детали

Номер произв PTS0805M
Описание Platinum SMD Flat Chip Temperature Sensor
Производители Vishay
логотип Vishay логотип 

5 Pages
scroll

No Preview Available !

PTS0805M Даташит, Описание, Даташиты
www.vishay.com
PTS AT
Vishay Beyschlag
Platinum SMD Flat Chip
Temperature Sensor
PTS AT SMD flat chip temperature sensors are the perfect
choice for temperature control of electronics operating
under varying environmental conditions. The highly
controlled platinum thin film manufacturing process
guarantees an outstanding stability of temperature
characteristics which ensures reliable operation even under
harsh conditions. Typical applications include automotive,
aviation and industrial electronics.
FEATURES
• Standardized characteristics according to
IEC 60751
• AEC-Q200 qualified
• Short reaction times down to t0.9 3 s (in air)
• Outstanding stability of temperature
characteristic
• Superior temperature cycling robustness
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Temperature measurement and control in
• Automotive electronics
• Aviation electronics
• Industrial electronics
TECHNICAL SPECIFICATIONS
DESCRIPTION
PTS0805M
PTS1206M
Resistance values R0 at 0 °C
100 , 500
100 , 500 , 1000
Temperature coefficient (0 °C to +100 °C)
+3850 ppm/K
Tolerance classes
F0.3, F0.6
Temperature range
-55 °C to +175 °C
Long term stability |R0/R0|;
R0 change after 1000 h at +155 °C
Insulation resistance
0.1 %
> 10 M
100
0.1 mA to 1.0 mA
0.1 mA to 1.0 mA
Measurement current Imeas. (DC) (1)
500
1000
0.1 mA to 0.40 mA
-
0.1 mA to 0.40 mA
0.1 mA to 0.25 mA
Self-heating at 0 °C (2)
Calm air
(v = 0.0 m/s)
0.8 K/mW
0.7 K/mW
Thermal response time (2)
Flowing water
(v = 0.4 m/s)
Flowing air
(v = 3.0 m/s)
t0.5 0.2 s
t0.9 0.3 s
t0.5 1.5 s
t0.9 3.0 s
Notes
(1) Indicated measurement currents can be applied continuously with self-heating effect of less then 0.1 °C.
(2) Valid for sensor element only.
t0.5 0.3 s
t0.9 0.4 s
t0.5 2.0 s
t0.9 5.0 s
Revision: 16-Jun-15
1 Document Number: 28899
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000









No Preview Available !

PTS0805M Даташит, Описание, Даташиты
www.vishay.com
DIMENSIONS in millimeters
Tt
PTS AT
Vishay Beyschlag
W WT
H
Tb
L
DIMENSIONS AND MASS
TYPE
HL
PTS 0805
PTS 1206
0.45 + 0.1 / - 0.05
2.0 ± 0.1
0.55 ± 0.1
3.2 + 0.1 / - 0.2
W
1.25 ± 0.15
1.6 ± 0.15
SOLDER PAD DIMENSIONS in millimeters
WT
> 75 % of W
> 75 % of W
Tt
0.4 + 0.1 / - 0.2
0.5 ± 0.25
Tb
0.4 + 0.1 / - 0.2
0.5 ± 0.25
MASS
(mg)
4.6
9.2
GX
Y
Z
RECOMMENDED SOLDERPAD DIMENSIONS
TYPE
WAVE SOLDERING
GYX
PTS 0805 0.8 1.25 1.50
PTS 1206 1.4 1.5 1.9
Z
3.2
4.4
REFLOW SOLDERING
GYXZ
0.9 0.9 1.4 2.7
1.5 1.15 1.75 3.8
DESCRIPTION
A homogeneous film of platinum is deposited on a high
grade (AI2O3) ceramic substrate and conditioned to achieve
the correct temperature coefficient and stability. The
sensor-elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure matte tin on nickel
plating, the immunity against tin whisker growth has been
proven under extensive testing.
QUALITY
The result of the determined production is verified by an
extensive testing procedure and optical inspection
performed on 100 % of the individual sensors. Only
accepted products are laid directly into the paper tape in
accordance with IEC 60286-3.
STORAGE
Solderability is specified for 2 years after production or
re-qualification. The permitted storage time is 20 years.
ASSEMBLY
The Pt-sensors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using wave, reflow or vapour phase as shown in
IEC61760-1. The encapsulation is resistant to all cleaning
solvents commonly used in the electronics industry,
including alcohols, esters and aqueous solutions. The
suitability of conformal coatings, if applied, shall be qualified
by appropriate means to ensure the long-term stability of the
whole system. The use of potting resins in close contact
with the protective coating or terminations is not
recommended.
All products comply with the CEFIC-EECA-EICTA list of
legal restrictions on hazardous substances.
This includes full compatibility with the following directives:
• 2000/53/EC End of Life Vehicle Directive (ELV) and
Annex II (ELV II)
• 2011/65/EU Restriction of the use of Hazardous
Substances Directive (RoHS)
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
APPROVALS
The Pt-sensors are tested in accordance with
• IEC 60751
• IEC 60068 series
The Pt-sensors are qualified according to AEC-Q200.
Revision: 16-Jun-15
2 Document Number: 28899
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000









No Preview Available !

PTS0805M Даташит, Описание, Даташиты
www.vishay.com
PTS AT
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION (1)
PART NUMBER (2): PTS0805M1B500RP100
P T S 0 8 05M1 B 5 0 0RP1 0 0
TYPE
SIZE CODE
VERSION
TOLERANCE
CLASS
RESISTANCE
VALUE
3 digits
PTS = Platinum
Temperature
Sensor SMD
4 digits
0805
1206
1 digit
M = AT
(automotive)
2 digits
1B = Class F0.3
2B = Class F0.6
4 digits
100R = 100
500R = 500
1K00 = 1000
PRODUCT DESCRIPTION (4): PTS 0805-B AT P1 500R
PTS 0805
-B
AT
PACKAGING (3)
2 digits
PU
P1
P1
SPECIAL
2 digits
00 = Standard
500R
TYPE
PTS = Platinum
Temperature
Sensor SMD
SIZE CODE
0805
1206
TOLERANCE
CLASS
B = Class F0.3
2B = Class F0.6
VERSION
AT = Automotive
PACKAGING (3)
PU
P1
Notes
(1) Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION.
(2) The part number is shown to facilitate the introduction of a unified part numbering system.
(3) Please refer to table PACKAGING.
(4) We recommend that the Production Description is used to minimize the possibility of errors in order handling.
RESISTANCE
VALUE
100R = 100
500R = 500
1K = 1000
PACKAGING
TYPE
CODE
PTS 0805
PTS 1206
PU
P1
QUANTITY
100
1000
CARRIER
TAPE
Paper tape acc.
IEC 60286-3
WIDTH
8 mm
PITCH
4 mm
BOX/REEL
Box
Reel
BOX/REEL
DIAMETER
114 mm
180 mm/7"
TESTS AND REQUIREMENTS
TEST
High temperature exposure (storage)
High temperature exposure (storage)
Temperature cycling
Biased humidity
Operational life
Vibration
Mechanical shock
Resistance to soldering heat
ESD
Board flex
Terminal strength
CONDITIONS
AEC-Q200, 1000 h at 155 °C
1000 h at 175 °C
AEC-Q200, 1000 cycles -55 °C to +155 °C
1000 h, 1 mA biased at 85 °C / 85 % RH
1000 h, 1 mA biased at 125 °C
MIL-STD 202, method 204
MIL-STD 202, method 213
Solder bath dipping 10 s at 260°C
AEC-Q200, HBM (CD) 1.5 kV (0805), 2.0 kV (1206)
AEC-Q200-005, 2 mm during 60 s
AEC-Q200-006, shear test 17.7 N during 60 s
REQUIREMENTS
|R0/R0|
0.1 %
0.2 %
0.5 %
0.5 %
0.2 %
0.1 %
0.1 %
0.25 %
0.5 %
0.2 %
0.25 %
Revision: 16-Jun-15
3 Document Number: 28899
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000










Скачать PDF:

[ PTS0805M.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
PTS0805Platinum SMD Flat Chip Temperature SensorVishay
Vishay
PTS0805MPlatinum SMD Flat Chip Temperature SensorVishay
Vishay

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск