DataSheet.es    


PDF MC80C7208 Data sheet ( Hoja de datos )

Número de pieza MC80C7208
Descripción 8-BIT SINGLE-CHIP MICROCONTROLLERS
Fabricantes ABOV SEMICONDUCTOR 
Logotipo ABOV SEMICONDUCTOR Logotipo



Hay una vista previa y un enlace de descarga de MC80C7208 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! MC80C7208 Hoja de datos, Descripción, Manual

ABOV SEMICONDUCTOR Co., Ltd.
8-BIT SINGLE-CHIP MICROCONTROLLERS
MC80F7208
MC80C7208
User’s Manual (Ver. 1.15)

1 page




MC80C7208 pdf
MC80F7208
MC80F7208
MC80C7208
CMOS SINGLE-CHIP 8-BIT MICROCONTROLLER
WITH LCD CONTROLLER/DRIVER
1. OVERVIEW
1.1 Description
The MC80X7208 is an advanced CMOS 8-bit microcontroller with 8K bytes of FLASH/ROM. This device is one of the
HMS800 and MC800 families and a powerful microcontroller which provides a high flexibility and cost effective solution
to many LCD applications. The MC80X7208 provides the following standard features: 8K bytes of FLASH/ROM, 256 bytes
of RAM, 27 nibbles of segment LCD display RAM, 8/16-bit timer/counter, 8-bit A/D converter, 7-bit watch dog timer, 8-bit
remote control carrier generator, 21-bit watch timer with 7-bit auto reload counter, on-chip oscillator and clock circuitry. In
addition, this device supports power down modes to reduce power consumption. So the MC80X7208 is the best controller
solution in system which charatered LCD display, ADC and battery backup. This document is only explained for the base of
MC80X7208, the compact functions are same as below.
Device name
Memory
(Bytes)
ROM RAM
ADC
PWM
REMOUT UART
ISP
LCD
Operating
Voltage
Package
MC80F72081 8K 256 6ch. 1ch.
1ch.
1ch.
O
24SEG x 4COM
2.2 ~ 5.5V
64MQFP
64LQFP
MC80C72081 8K 256 6ch. 1ch.
1ch.
-
-
24SEG x 4COM
1.8 ~ 5.5V
64MQFP
64LQFP
1. F: FLASH ROM, C:MASK ROM
1.2 Features
• 8K Bytes On-chip ROM
• FLASH Memory
- Endurance : 1000 cycles
- Data Retention : 10 years
• 256 Bytes On-chip Data RAM
• 27 Nibbles Display RAM
• Instruction Cycle Time:
- 333ns at 12MHz (2 cycle NOP instruction)
• LCD display/controller (LCDC)
- Static Mode (27Seg × 1Com, 1/3 Bias)
- 1/2 Duty Mode (26Seg × 2Com, 1/3 Bias)
- 1/3 Duty Mode (25Seg × 3Com, 1/3 Bias)
- 1/4 Duty Mode (24Seg × 4Com, 1/3 Bias)
• Four 8-bit Timer/Counter
(They can be used as two 16-bit Timer/Counter)
• One 7-bit Watch Dog Timer
• One 21-bit Watch Timer
- 1 minute interrupt available
• One 8-bit Basic Interval Timer
• One 6-bit Buzzer Driving Port
• Dual Clock Operation
- Main Clock : 1MHz ~ 12MHz
- Sub Clock : 32.768kHz
• Main Clock Oscillation
- Crystal
- Ceramic Resonator
- External RC/R Oscillator(Built-in Capacitor)
• Operating Temperature : -40~85 °C
• Built-in Noise Immunity Circuit
- Noise Filter
- Low Voltage Detector(LVD) : 1.8V(Typ.)
- Power Fail Detector(PFDL or PFDH) :
February 11, 2010 Ver 1.15
1

5 Page





MC80C7208 arduino
MC80F7208
5. PIN FUNCTION
VDD: Supply Voltage.
VSS: Circuit ground.
RESET: Reset the MCU Reset.
REMOUT: Signal output of an infrared remote controller.
XIN: Input to the inverting oscillator amplifier and input to
the internal main clock operating circuit.
XOUT: Output from the inverting oscillator amplifier.
SXIN: Input to the internal sub system clock operating cir-
cuit.
SXOUT: Output from the inverting subsystem oscillator
amplifier.
VCL0~VCL2: Power supply pins(bias) for the LCD driv-
er. The voltage on each pin is VCL2 > VCL1 > VCL0. See
"19. LCD DRIVER" on page 76 for details.
VLCDC: Booster reference voltage to drive LCD
CAPH, CAPL: Booster capacitor for voltage booster cir-
cuit to drive LCD.
VREG: Output of the voltage regulator for the sub clock os-
cillation circuit. Connect external 0.1uF capacitor to this
pin when using the sub system clock.
SEG0~SEG23, SEG32~SEG34: Segment signal output
pins for the LCD display. See "19. LCD DRIVER" on page
76 for details. Also SEG0~SEG23 are shared with a nor-
mal I/O ports and SEG32~34 are multiplexed with
COM3~COM1.
COM0~COM3: Common signal output pins for the LCD
display. See "19. LCD DRIVER" on page 76 for details.
SEG32~SEG34 and COM1~COM3 are selected by
LCDD[1:0] of the LCR register.
Port pin
COM0
COM1
COM2
COM3
-
SEG34
SEG33
SEG32
Alternate function
R01, R04, R06, R07: R0 is a 4-bit CMOS bidirectional I/
O port. R0 pins 1 or 0 written to the Port Direction Register
can be used as outputs or inputs. Also, pull-up resistors and
open-drain outputs can be assigned by software.
In addition, R0 serves the functions of the various follow-
ing special features.
Port pin
R01
R04
R06
R07
Alternate function
EC0 (Timer 0 Event Count Input)
BUZO (Buzzer Output)
INT0 (External Interrupt 0 Request Input)
INT1 (External Interrupt 1 Request input)
R10: R1 is an 1-bit CMOS bidirectional I/O port. R1 pins
1 or 0 written to the Port Direction Register can be used as
outputs or inputs or schmitt trigger inputs. Also, pull-up re-
sistors and open-drain outputs can be assigned by software.
In addition, R1 serves the function of the following special
feature.
Port pin
Alternate function
R10
PWM1/T2O
(Timer3 PWM Output / Timer2 Output)
R20~R25: R2 is a 6-bit CMOS bidirectional I/O port. Each
pins 1 or 0 written to the Port Direction Register can be
used as outputs or inputs. Also, pull-up resistors and open-
drain outputs can be assigned by software.
In addition, R2 serves the functions of the various follow-
ing special features.
Port pin
R20
R21
R22
R23
R24
R25
Alternate function
AN0 (Analog Input Port0)
AN1 (Analog Input Port1)
AN2 (Analog Input Port2)
AN3 (Analog Input Port3)
AN4 (Analog Input Port4)
AN5 (Analog Input Port5)
R34~R37: R3 is a 4-bit CMOS bidirectional I/O port. Each
pins 1 or 0 written to the Port Direction Register can be
used as outputs or inputs. Also, pull-up resistors and open-
drain outputs can be assigned by software.
In addition, R3 serves the functions of the various follow-
ing special features.
Port pin
R34
R35
R36
R37
Alternate function
KS4 (Key scan input 4)
KS5 (Key scan input 5)
KS6 (Key scan input 6)
KS7 (Key scan input 7)
February 11, 2010 Ver 1.15
7

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet MC80C7208.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MC80C72088-BIT SINGLE-CHIP MICROCONTROLLERSABOV SEMICONDUCTOR
ABOV SEMICONDUCTOR

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar