DataSheet.es    


PDF MKV30F128VFM10 Data sheet ( Hoja de datos )

Número de pieza MKV30F128VFM10
Descripción Microcontroller
Fabricantes Freescale Semiconductor 
Logotipo Freescale Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de MKV30F128VFM10 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! MKV30F128VFM10 Hoja de datos, Descripción, Manual

Freescale Semiconductor, Inc.
Data Sheet: Technical Data
KV30P64M100SFA
Rev. 3, 4/2015
Kinetis KV30F 64 KB/128 KB Flash
100 MHz Cortex-M4 Based Microcontroller with FPU
The KV30 MCU family is a highly scalable member of the Kinetis
V series and provides a high-performance, cost-competitive
motor-control solution. Built on the ARM® Cortex®-M4 core
running at 100 MHz, combined with floating point and DSP
capability, it delivers a highly capable platform enabling
customers to build a highly scalable solution portfolio.
Additional features include:
• Dual 16-bit ADCs sampling at up to 1.2 MS/s in 12-bit
mode
• Highly accurate and flexible motor control timers
• Excellent processing efficiency, 100 MHz ARM® Cortex®-
M4-based device with Floating-Point Unit in a tiny form
factor
MKV30F128Vxx10
MKV30F64Vxx10
64 LQFP (LH)
10 x 10 x 1.4 Pitch 0.5
mm
48 LQFP (LF)
7 x 7 x 1.4 Pitch 0.5
mm
32 QFN (FM)
5 x 5 x 1 Pitch 0.5 mm
Performance
• 100 MHz ARM Cortex-M4 core with DSP instructions
delivering 1.25 Dhrystone MIPS per MHz
Memories and memory interfaces
• Up to 128 KB of embedded flash and 16 KB of RAM
• Preprogrammed Kinetis flashloader for one-time, in-
system factory programming
System peripherals
• Flexible low-power modes, multiple wake up sources
• 4-channel DMA controller
• Independent External and Software Watchdog monitor
Clocks
• Crystal oscillator: 32-40 kHz or 3-32 MHz
• Three internal oscillators: 32 kHz, 4 MHz, and 48 MHz
• Multi-purpose clock generator with FLL
Security and integrity modules
• Hardware CRC module
• 128-bit unique identification (ID) number per chip
• Flash access control to protect proprietary software
Human-machine interface
• Up to 46 general-purpose I/O (GPIO)
Analog modules
• Two 16-bit SAR ADCs (1.2 MS/s in 12bit mode)
• One 12-bit DAC
• Two analog comparators (CMP) with 6- bit DAC
• Accurate internal voltage reference (not available in
32-pin QFN package)
Communication interfaces
• One SPI module
• Two UART modules
• One I2C: Support for up to 1 Mbps operation
Timers
• One 6-channel motor-control general-purpose/PWM
timer
• Two 2-channel motor-control general-purpose
timers with quadrature decoder functionality
• Periodic interrupt timers
• 16-bit low-power timer
• Programmable delay block
Operating Characteristics
• Voltage range (including flash writes): 1.71 to 3.6 V
• Temperature range (ambient): -40 to 105°C
© 2014–2015 Freescale Semiconductor, Inc. All rights reserved.

1 page




MKV30F128VFM10 pdf
Ratings
1 Ratings
1.1 Thermal handling ratings
Symbol
TSTG
TSDR
Description
Storage temperature
Solder temperature, lead-free
Min.
–55
Max.
150
260
Unit Notes
°C 1
°C 2
1. Determined according to JEDEC Standard JESD22-A103, High Temperature Storage Life.
2. Determined according to IPC/JEDEC Standard J-STD-020, Moisture/Reflow Sensitivity Classification for Nonhermetic
Solid State Surface Mount Devices.
1.2 Moisture handling ratings
Symbol Description
MSL Moisture sensitivity level
Min.
Max.
3
Unit Notes
—1
1. Determined according to IPC/JEDEC Standard J-STD-020, Moisture/Reflow Sensitivity Classification for Nonhermetic
Solid State Surface Mount Devices.
1.3 ESD handling ratings
Symbol
VHBM
VCDM
ILAT
Description
Electrostatic discharge voltage, human body model
Electrostatic discharge voltage, charged-device
model
Latch-up current at ambient temperature of 105°C
Min.
-2000
-500
-100
Max.
+2000
+500
+100
Unit
V
V
mA
Notes
1
2
3
1. Determined according to JEDEC Standard JESD22-A114, Electrostatic Discharge (ESD) Sensitivity Testing Human
Body Model (HBM).
2. Determined according to JEDEC Standard JESD22-C101, Field-Induced Charged-Device Model Test Method for
Electrostatic-Discharge-Withstand Thresholds of Microelectronic Components.
3. Determined according to JEDEC Standard JESD78, IC Latch-Up Test.
1.4 Voltage and current operating ratings
Kinetis KV30F 64 KB/128 KB Flash, Rev. 3, 4/2015
5
Freescale Semiconductor, Inc.

5 Page





MKV30F128VFM10 arduino
General
Table 5. Power consumption operating behaviors (continued)
Symbol
IDD_RUN
IDD_RUN
IDD_RUN
Description
Run mode current in Compute operation —
code executing from flash
@ 1.8V
@ 3.0V
Run mode current — all peripheral clocks
disabled, code executing from flash
@ 1.8V
@ 3.0V
Run mode current — all peripheral clocks
enabled, code executing from flash
@ 1.8V
@ 3.0V
• @ 25°C
Min.
Typ.
Max.
Unit
12.10
13.10
mA
12.20
13.37
mA
— 12.8 13.47 mA
— 12.9 13.57 mA
— 14.8 15.47 mA
— 14.9 15.57 mA
• @ 70°C
— 14.9 15.57 mA
• @ 85°C
— 14.9 15.57 mA
IDD_RUN
• @ 105°C
Run mode current — Compute operation, code
executing from flash
@ 1.8V
@ 3.0V
• @ 25°C
15.5 16.20 mA
12.1 12.77 mA
12.2 12.87 mA
• @ 70°C
— 12.2 12.87 mA
• @ 85°C
— 12.2 12.87 mA
• @ 105°C
— 12.7 13.37 mA
IDD_WAIT
IDD_WAIT
IDD_VLPR
IDD_VLPR
IDD_VLPR
Wait mode high frequency current at 3.0 V — all
peripheral clocks disabled
Wait mode reduced frequency current at 3.0 V
— all peripheral clocks disabled
Very-low-power run mode current in Compute
operation — CoreMark benchmark code
executing from flash
@ 1.8V
@ 3.0V
Very-low-power run mode current in Compute
operation, code executing from flash
@ 1.8V
@ 3.0V
Very-low-power run mode current at 3.0 V — all
peripheral clocks disabled
5.5
3.5
0.58
0.59
0.47
0.47
0.62
Table continues on the next page...
6.17
4.17
0.86
0.87
0.75
0.75
0.90
mA
mA
mA
mA
mA
mA
mA
Notes
6
7
8
9
7
10
2, 11, 3
11
12
Kinetis KV30F 64 KB/128 KB Flash, Rev. 3, 4/2015
11
Freescale Semiconductor, Inc.

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet MKV30F128VFM10.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MKV30F128VFM10MicrocontrollerFreescale Semiconductor
Freescale Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar