DataSheet26.com

ADS8406 PDF даташит

Спецификация ADS8406 изготовлена ​​​​«Burr-Brown Corporation» и имеет функцию, называемую «MICRO POWER SAMPLING ANALOG-TO-DIGITAL CONVERTER».

Детали детали

Номер произв ADS8406
Описание MICRO POWER SAMPLING ANALOG-TO-DIGITAL CONVERTER
Производители Burr-Brown Corporation
логотип Burr-Brown Corporation логотип 

29 Pages
scroll

No Preview Available !

ADS8406 Даташит, Описание, Даташиты
BurrĆBrown Products
from Texas Instruments
ADS8406
SLAS426A – AUGUST 2004 – REVISED DECEMBER 2004
16-BIT, 1.25 MSPS, PSEUDO-BIPOLAR, FULLY DIFFERENTIAL INPUT, MICRO POWER
SAMPLING ANALOG-TO-DIGITAL CONVERTER WITH PARALLEL INTERFACE
FEATURES
Pseudo-Bipolar, Fully Differential Input, -VREF
to VREF
16-Bit NMC at 1.25 MSPS
• ±2 LSB INL Max, -1/+1.25 LSB DNL
90 dB SNR, -95 dB THD at 100 kHz Input
Zero Latency
Internal 4.096 V Reference
High-Speed Parallel Interface
Single 5 V Analog Supply
Wide I/O Supply: 2.7 V to 5.25 V
Low Power: 155 mW at 1.25 MHz Typ
Pin Compatible With ADS8412/8402
48-Pin TQFP Package
APPLICATIONS
DWDM
Instrumentation
High-Speed, High-Resolution, Zero Latency
Data Acquisition Systems
Transducer Interface
Medical Instruments
Communications
DESCRIPTION
The ADS8406 is a 16-bit, 1.25 MHz A/D converter
with an internal 4.096-V reference. The device in-
cludes a 16-bit capacitor-based SAR A/D converter
with inherent sample and hold. The ADS8406 offers a
full 16-bit interface and an 8-bit option where data is
read using two 8-bit read cycles.
The ADS8406 has a pseudo-bipolar, fully differential
input. It is available in a 48-lead TQFP package and
is characterized over the industrial -40°C to 85°C
temperature range.
Type/Speed
18 Bit Pseudo-Diff
16 Bit Pseudo-Diff
500 kHz
ADS8383
16 Bit Pseudo Bipolar,
Fully Differential
14 Bit Pseudo-Diff
12 Bit Pseudo-Diff
High Speed SAR Converter Family
580 kHz
ADS8381
750 MHZ
ADS8371
1.25 MHz
2 MHz
ADS8401
ADS8405
ADS8402
ADS8406
ADS7890 (S)
ADS8411
ADS8412
3 MHz
ADS7891
4 MHz
ADS7881
REFOUT
+IN
−IN
REFIN
+
_ CDAC
4.096-V
Internal
Reference
SAR
Comparator
Clock
Output
Latches
and
3-State
Drivers
Conversion
and
Control Logic
BYTE
16-/8-Bit
Parallel DATA
Output Bus
RESET
CONVST
BUSY
CS
RD
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004, Texas Instruments Incorporated









No Preview Available !

ADS8406 Даташит, Описание, Даташиты
ADS8406
SLAS426A – AUGUST 2004 – REVISED DECEMBER 2004
ORDERING INFORMATION(1)
MODEL
MAXIMUM
INTEGRAL
LINEARITY
(LSB)
MAXIMUM
DIFFERENTIAL
LINEARITY
(LSB)
NO MISSING
CODES
RESOLUTION
(BIT)
PACKAGE
TYPE
PACKAGE
DESIG-
NATOR
TEMPERA-
TURE
RANGE
ADS8406I
–4 to +4
–2 to +2
15
48 Pin
TQFP
PFB
–40°C to 85°C
ADS8406IB
–2 to +2
–1 to +1.25
16
48 Pin
TQFP
PFB
–40°C to 85°C
(1) For the most current specifications and package information, refer to our website at www.ti.com.
www.ti.com
ORDERING
INFORMATION
TRANSPORT
MEDIA
QUANTITY
ADS8406IPFBT
ADS8406IPFBR
ADS8406IBPFBT
ADS8406IBPFBR
Tape and reel
250
Tape and reel
1000
Tape and reel
250
Tape and reel
1000
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted(1)
Voltage
+IN to AGND
–IN to AGND
+VA to AGND
Voltage range +VBD to BDGND
+VA to +VBD
Digital input voltage to BDGND
Digital output voltage to BDGND
TA Operating free-air temperature range
Tstg Storage temperature range
Junction temperature (TJ max)
Power dissipation
TQFP package
θJA thermal impedance
Lead temperature, soldering
Vapor phase (60 sec)
Infrared (15 sec)
UNIT
–0.4 V to +VA + 0.1 V
–0.4 V to +VA + 0.1 V
–0.3 V to 7 V
–0.3 V to 7 V
–0.3 V to 2.55 V
–0.3 V to +VBD + 0.3 V
–0.3 V to +VBD + 0.3 V
–40°C to 85°C
–65°C to 150°C
150°C
(TJMax - TA)/θJA
86°C/W
215°C
220°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
2









No Preview Available !

ADS8406 Даташит, Описание, Даташиты
ADS8406
www.ti.com
SLAS426A – AUGUST 2004 – REVISED DECEMBER 2004
SPECIFICATIONS
TA = –40°C to 85°C, +VA = 5 V, +VBD = 3 V or 5 V, Vref = 4.096 V, fSAMPLE = 1.25 MHz (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP
MAX
ANALOG INPUT
Full-scale input voltage (1)
Absolute input voltage
Input capacitance
+IN – (–IN)
+IN
–IN
–Vref
–0.2
–0.2
Vref
Vref + 0.2
Vref + 0.2
25
Input leakage current
0.5
SYSTEM PERFORMANCE
Resolution
16
No missing codes
ADS8406I
ADS8406IB
15
16
INL Integral linearity (2)(3)
ADS8406I
ADS8406IB
–4 ±2
–2 ±1
4
2
DNL Differential linearity
ADS8406I
ADS8406IB
–2 ±1
–1 ±0.5
2
1.25
EO Offset error(4)
ADS8406I
ADS8406IB
–2.5 ±1
–1.5 ±0.5
2.5
1.5
EG Gain error(4)(5)
ADS8406I
ADS8406IB
–0.12
–0.098
0.12
0.098
CMRR Common mode rejection ratio
PSRR DC Power supply rejection ratio
At dc (0.2 V around Vref/2)
+IN – (–IN) = 1 Vpp at 1 MHz
At 7FFFh output code, +VA
= 4.75 V to 5.25 V, Vref =
4.096 V (4)
80
80
2
SAMPLING DYNAMICS
Conversion time
500 650
Acquisition time
150
Throughput rate
1.25
Aperture delay
2
Aperture jitter
25
Step response
100
Overvoltage recovery
100
DYNAMIC CHARACTERISTICS
THD Total harmonic distortion (6)
SNR Signal-to-noise ratio
SINAD Signal-to-noise + distortion
SFDR Spurious free dynamic range
-3dB Small signal bandwidth
VIN = 8 Vpp at 100 kHz
VIN = 8 Vpp at 500 kHz
VIN = 8 Vpp at 100 kHz
VIN = 8 Vpp at 100 kHz
VIN = 8 Vpp at 100 kHz
VIN = 8 Vpp at 500 kHz
–95
–90
90
88
95
93
5
EXTERNAL VOLTAGE REFERENCE INPUT
Reference voltage at REFIN, Vref
Reference resistance (7)
2.5 4.096
500
4.2
UNIT
V
V
pF
nA
Bits
Bits
LSB
LSB
mV
mV
%FS
dB
LSB
ns
ns
MHz
ns
ps
ns
ns
dB
dB
dB
dB
MHz
V
k
(1) Ideal input span, does not include gain or offset error.
(2) LSB means least significant bit
(3) This is endpoint INL, not best fit.
(4) Measured relative to an ideal full-scale input [+IN – (–IN)] of 8.192 V
(5) This specification does not include the internal reference voltage error and drift.
(6) Calculated on the first nine harmonics of the input frequency
(7) Can vary ±20%
3










Скачать PDF:

[ ADS8406.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
ADS840116-BIT/ 1.25 MSPS/ UNIPOLAR INPUT/ MICRO POWER SAMPLING ANALOG-TODIGITAL CONVERTER WITH PARALLEL INTERFACE AND REFERENCEBurr-Brown Corporation
Burr-Brown Corporation
ADS8401IBPFBR16-BIT/ 1.25 MSPS/ UNIPOLAR INPUT/ MICRO POWER SAMPLING ANALOG-TODIGITAL CONVERTER WITH PARALLEL INTERFACE AND REFERENCEBurr-Brown Corporation
Burr-Brown Corporation
ADS8401IBPFBT16-BIT/ 1.25 MSPS/ UNIPOLAR INPUT/ MICRO POWER SAMPLING ANALOG-TODIGITAL CONVERTER WITH PARALLEL INTERFACE AND REFERENCEBurr-Brown Corporation
Burr-Brown Corporation
ADS8401IPFBR16-BIT/ 1.25 MSPS/ UNIPOLAR INPUT/ MICRO POWER SAMPLING ANALOG-TODIGITAL CONVERTER WITH PARALLEL INTERFACE AND REFERENCEBurr-Brown Corporation
Burr-Brown Corporation

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск