|
|
PDF NCE3420 Data sheet ( Hoja de datos )
| Número de pieza | NCE3420 | |
| Descripción | NCE N-Channel Enhancement Mode Power MOSFET | |
| Fabricantes | NCE Power Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NCE3420 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
http://www.ncepower.com
Pb Free Product
NCE3420
NCE N-Channel Enhancement Mode Power MOSFET
Description
The NCE3420 uses advanced trench technology to provide
excellent RDS(ON), low gate charge and operation with gate
voltages as low as 1.8V. This device is suitable for use as a
uni-directional or bi-directional load switch.
General Features
● VDS = 20V,ID = 6A
RDS(ON) < 35mΩ @ VGS=2.5V
RDS(ON) < 27mΩ @ VGS=4.5V
● High Power and current handing capability
● Lead free product is acquired
● Surface Mount Package
D
G
S
Schematic diagram
Marking and pin Assignment
Application
●Uni-directional Load switch
●Bi-directional Load switch
SOT-23 top view
Package Marking and Ordering Information
Device Marking
Device
Device Package
3420
NCE3420
SOT-23
Reel Size
Ø180mm
Tape width
8 mm
Quantity
3000 units
Absolute Maximum Ratings (TA=25℃unless otherwise noted)
Parameter
Symbol
Drain-Source Voltage
VDS
Gate-Source Voltage
VGS
Drain Current-Continuous
Drain Current-Pulsed (Note 1)
ID
IDM
Maximum Power Dissipation
PD
Operating Junction and Storage Temperature Range
TJ,TSTG
Thermal Characteristic
Thermal Resistance,Junction-to-Ambient (Note 2)
RθJA
Limit
20
±10
6
30
1.25
-55 To 150
100
Unit
V
V
A
A
W
℃
℃/W
Electrical Characteristics (TA=25℃unless otherwise noted)
Parameter
Symbol
Condition
Off Characteristics
Drain-Source Breakdown Voltage
BVDSS
VGS=0V ID=250μA
Zero Gate Voltage Drain Current
IDSS VDS=20V,VGS=0V
Min Typ Max Unit
20 22
--
-
1
V
μA
Wuxi NCE Power Semiconductor Co., Ltd
Page 1
v1.0
1 page  
http://www.ncepower.com
Pb Free Product
NCE3420
Attention:
■ Any and all NCE power products described or contained herein do not have specifications that can handle applications that
require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications
whose failure can be reasonably expected to result in serious physical and/or material damage. Consult
with your NCE power representative nearest you before using any NCE power products described or contained herein in
such applications.
■ NCE power assumes no responsibility for equipment failures that result from using products at values
that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters)
listed in products specifications of any and all NCE power products described or contained herein.
■ Specifications of any and all NCE power products described or contained herein stipulate the performance, characteristics,
and functions of the described products in the independent state, and are not guarantees of the performance, characteristics,
and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states
that cannot be evaluated in an independent device, the customer should always evaluate and test
devices mounted in the customer’s products or equipment.
■ NCE power Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could
cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or
events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe
design, redundant design, and structural design.
■ In the event that any or all NCE power products(including technical data, services) described or contained herein are
controlled under any of applicable local export control laws and regulations, such products must not be exported without
obtaining the export license from the authorities concerned in accordance with the above law.
■ No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission
of NCE power Semiconductor CO.,LTD.
■ Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume
production. NCE power believes information herein is accurate and reliable, but no guarantees are made or implied
regarding its use or any infringements of intellectual property rights or other rights of third parties.
■ Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the NCE power
product that you intend to use.
■ This catalog provides information as of Sep.2010. Specifications and information herein are subject to change without notice.
Wuxi NCE Power Semiconductor Co., Ltd
Page 5
v1.0
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet NCE3420.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NCE3420 | NCE N-Channel Enhancement Mode Power MOSFET | NCE Power Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |