|
|
Número de pieza | AI329CA | |
Descripción | 1/3 inch CCD Image Sensor | |
Fabricantes | A1 PROs | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AI329CA (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! A1 PROs
Ver2.0
Ai329CA
1/3 inch CCD Image Sensor for PAL Camera
GENERAL DESCRIPTION
The Ai329CA is a 290K pixels’ CCD area
sensor for PAL 1/3 inch video cameras. Buried
photodiodes and micro lenses are adopted for
low noise, low smear and high sensitivity. A
chrominance signal is achieved by the adoption
of Yellow, Magenta, Cyan and Green
complementary color mosaic filters. This
product also has the features of strong anti-
blooming and electronic shutter with variable
charge-storage time.
16 Pin Plastic - DIP
( Top View )
V4 1
V3 2
V2 3
V1 4
GND 5
VNGCG 6
VNSCS 7
VOUT 8
FEATURES
• Micro lens arrays for high sensitivity
• Ye, Mg, Cy and G complementary color mosaic filters
• Excellent blooming suppression
• TTL level(5V) operation on HCCD & RG electrodes
• 16 pin plastic DIP type package
• Variable electronic shutter of 1/50 to 1/100,000 sec
• High sensitivity and low smear
• Low image lag
16 H 2
15 H 1
14 NC
13 VRRGG
12 VP
11 VSUB
10 GND
9 VDD
STRUCTURE
• Architecture : IT - CCD
• Optical size : 1/3 inch format
• Chip size : 6.0(H) x 5.2(V)
• Number of effective pixels :
500 (H) x 582 (V) about 290K pixels
• Number of total pixels :
537 (H) x 597 (V) about 320K pixels
• Pixel size : 9.8 (H) x 6.3 (V) 2
• Optical black area
Horizontal direction : Front 7 pixels Rear 30 pixels
Vertical direction : Front 14 pixels Rear 1 pixels
• Number of dummy bits
Horizontal : 16
Vertical : 1 ( Even field only )
Optical black position( Top View )
Unit : Pixels
Pin1
1
582
7
Pin9
500
14
30
1
1 page MESUREMENT METHOD
Ai329CA
1. Sensitivity
Set to SILC ( Standard Illumination Conditions* )
Measure the average value of signal output ( VOUT )
Calculate the efficiency of VOUT to light intensity
2. VSAT
Adjust light intensity to 200 times of SILC
Measure the average value of signal output
3. Smear
Adjust light intensity to 200 times of SILC & readout clock
Measure the signal output at horizontal optical black ( VHOPB )
Measure the signal output at vertical blanking dummy ( VVBD )
Smear = { (VVBD - VHOPB) / VSAT } 100 ( % )
4. Blooming
Adjust light intensity to 200 times of SILC & readout clock
Measure the signal output at horizontal optical black (VHOPB )
Measure the signal output at blooming dummy area ( VBD )
Blooming = { ( VBD - VHOPB ) / VSAT } 100 ( % )
5. OSNU
Set to SILC
Measure the average value of signal output ( VOUT )
Measure the maximum value and the minimum value of signal output
OSNU = ( VMAX - VMIN ) / VOUT 100 (%)
6. Sr, Sb
Set to SILC
Measure the average value of signal output ( VOUT )
Measure the maximum value and minimum value of chroma output
Sr = ( CrMAX - CrMIN ) / VOUT
100 (%)
Sb= ( CbMAX - CbMIN ) / VOUT
100 (%)
7. VDARK
Measure the average value of signal output at dark condition
8. DSNU
Measure the voltage difference between minimum and maximum of dark signal
5
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet AI329CA.PDF ] |
Número de pieza | Descripción | Fabricantes |
AI329CA | 1/3 inch CCD Image Sensor | A1 PROs |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |