DataSheet.es    


PDF OPB755N Data sheet ( Hoja de datos )

Número de pieza OPB755N
Descripción Reflective Object Sensor
Fabricantes OPTEK Technologies 
Logotipo OPTEK Technologies Logotipo



Hay una vista previa y un enlace de descarga de OPB755N (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! OPB755N Hoja de datos, Descripción, Manual

Product Bulletin OPB755N
JJuannuea1ry9290606
Reflective Object Sensor
Type OPB755N
Features
High contrast ratio 1000 to 1 minimum
12.0" ± 0.5" min. UL#1429 26 AWG
wire leads terminated into an AMP
#640442-5 connector
Low cost plastic housing
12.0 ± 0.5
(304.8 ± 12.7)
Description
The OPB755N reflective assembly
features a phototransistor output
designed to decrease low-level light gain
while not affecting the high-level light
gain. Available with two mounting tabs as
OPB755T.
Available with PC Board mountable
leads as OPB750 series. Photologic®
output sensors available in
OPB760/OPB770 series.
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . . -40o C to +80o C
Input Diode
Forward DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Peak Forward Current (1 µs pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . . . 3.0 A
Reverse DC Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW
Output Phototransistor
Collector-Emitter Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Collector DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW
Notes:
(1) Derate Linearly 1.82 mW/o C above 25o C.
(2) All parameters tested using pulse technique.
(3) Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in
chlorinated hydrocarbons and ketones.
(4) Photocurrent is measured using an Eastman Kodak Neutral White test card having a 90%
diffuse reflectance as a reflecting surface. Reference: Eastman Kodak, Catalog #1257795.
(5) IC(OFF) is the photocurrent measured with current to the input diode and a 5% reflecting
surface.
For RoHS compliant devices add "Z" to the end of the part number: OPB755NZ
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
11-46
(972) 323-2200
Fax (972) 323-2396

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet OPB755N.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
OPB755NReflective Object SensorOPTEK Technologies
OPTEK Technologies
OPB755NZReflective Object SensorOPTEK Technologies
OPTEK Technologies
OPB755TReflective Object SensorOPTEK Technologies
OPTEK Technologies
OPB755TAZReflective Object SensorOPTEK Technologies
OPTEK Technologies

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar