DataSheet.es    


PDF QN8036 Data sheet ( Hoja de datos )

Número de pieza QN8036
Descripción High Performance Digital FM Transceiver
Fabricantes Quintic 
Logotipo Quintic Logotipo



Hay una vista previa y un enlace de descarga de QN8036 (archivo pdf) en la parte inferior de esta página.


Total 3 Páginas

No Preview Available ! QN8036 Hoja de datos, Descripción, Manual

Product Brief
QN8036
High Performance Digital FM Transceiver for Portable Devices
__________________________ General Description __________________________
The QN8036 is a high performance, low power, fully integrated single-chip stereo FM transceiver designed for cell phones,
PMP/PNDs, and portable radios. It integrates both FM receiving and transmitting functions, auto-seek and clear channel
scan, and antenna tuning to ease matching in real applications. Advanced digital architecture enables superior receiver
sensitivity, crystal clear audio.
With its small footprint, minimal external component count and multiple clock frequency support, the QN8036 is easy to
integrate into a variety of small form-factor low power portable applications. An integrated voltage regulator enables direct
connection to a battery and provides high PSRR for superior noise suppression. A low-power Standby mode extends battery
life. ESD protection is on all pins. The QN8036 is fabricated in highly reliable CMOS technology.
_____________________________ Key Features _____________________________
Worldwide FM Band Receive and Transmit
60 MHz ~ 108 MHz full band tuning in
50/100/200 kHz step sizes
50/75µs pre-emphasis and de-emphasis
High Performance FM Receiver (FMR)
Superior sensitivity: 1.2µVEMF
High SNR: 63dB Stereo
Ultra-low THD: 0.04%
High interference rejection
Integrated adaptive noise cancellation (SNC, HCC,
SM)
Auto tuning support
Stereo Earphone Driving with Line in feature
In Line-in mode, audio input feed into earphone
driver directly, save external earphone driver
1 kHz Tone Generator Inside
High Performance FM Transmitter (FMT)
62dB Stereo SNR, 0.04% THD
Maximum 119 dBµV RF output level with 42dB
adjustable range
Integrated Clear Channel Scan
Automatic Input Audio Sensing
RF power automatically turned off if no input
audio signal for 60s
RDS/RBDS Transmit & Receive
Supports US and European data service,
including TMC (Traffic Messaging Channel)
High speed RDS mode
Very Low Power Consumption
9.2mA (Transmit Mode), 13.5mA (Receive Mode)
Power saving IDLE and STANDBY modes
Low shutdown leakage current
Ease of Integration
Small footprint, 2.5 2.5mm QFN16 and 4.9
3.9mm SSOP16
Low cellular and GPS band spurs
32.768 kHz and multiple MHz clocks input
I2C control interfaces
VCC: 1.8~5.0V, integrated LDO, support battery
direct connection. Accommodate 1.6~3.6V digital
interface
Robust Operation
-250C to +850C operation
ESD protection on all input and output pads
_____________________________ Typical Applications __________________________
Feature Phones / Smart Phones
Portable Audio & Media Players
Net book
Automotive Accessories
Rev 0.2 (10/10)
Copyright ©2010 by Quintic Corporation
Page 1

1 page





PáginasTotal 3 Páginas
PDF Descargar[ Datasheet QN8036.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
QN8035Single-Chip Low-Power FM ReceiverQuintic
Quintic
QN8036High Performance Digital FM TransceiverQuintic
Quintic

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar