DataSheet.es    


PDF AS3658 Data sheet ( Hoja de datos )

Número de pieza AS3658
Descripción Power and Audio Management Unit
Fabricantes austriamicrosystems 
Logotipo austriamicrosystems Logotipo



Hay una vista previa y un enlace de descarga de AS3658 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! AS3658 Hoja de datos, Descripción, Manual

AS3658
Data Sheet Confidential
Power and Audio Management Unit for Portable Devices
1 General Description
The AS3658 is highly integrated power and audio
management unit. The AS3658 is designed to include
sophisticated audio features like high performance
audio DAC and ADC. It has several analog and digital
audio interface which are explained in detail in the
following sections. The AS3658 is an integrated solution
for power supply generation and monitoring, battery
management including charging.
2 Key Features
System Control
- Serial Control Interface
- On/Off Control Module with Boot-ROM / GPIO
- Reset Generation for system controller
- Programmable Interrupt Controller and Watchdog
- Low power off mode (9µA; 2.5V LDO on)
- 88 bit unique ID or Boot fuse array
- Reset with long ON-Keypress (SW-Interuptable)
- Touchscreen Interface (10 bit, interrupt)
Supply Voltage Generation
- 2 RF Programmable Low Noise LDOs (250mA) (1
LDO can be a current controlled switch for hotplug
(200mA ± 40%))
- 1 RF Programmable Low Noise LDO (400mA)
- 4 Programmable Dig. Low Power LDOs(200mA)
- 2 General Purpose PWM DC/DC step up converter
with three programmable current sinks (e.g. for-
white led); for current mode feedback is automati-
cally slected (DCDC_CURR1,2,3)
- 3 General Purpose high efficiency DC/DC step
down converter (DCDC 1 support DVM)
- 1 Low noise charge pump with 5V output voltage
- 1 Ultra Low Power 2.5V LDO (always on)
Current sinks
- 4 programmable(8-bit) from 0.15mA to 38.25mA
(±5% ) optional useable as GPIOs
- 3 programmable high voltage (15V) (8-bit) from
0.15mA to 38.25mA (±5% )
- internal PWM generator (extended time range)
(can control DCDC_CURR1,2,3)
10-bit 40µs Successive Approximation ADC
- Two external Inputs (ADC_IN1, ADC_IN2)
Battery Management
- Full featured chemistry independent step down
charger with Gas Gauge and Current limitation
- High Current (1.0A) Linear Charger with external
pass transistor (no step down charger)
- 0.1 Ω Battery switch for start-up and trickle charge
- Integrated USB charger up to 880mA (can be used
as wall adapter charger); current accuracy 440-
500mA for USB specification, in-circuit trimmable
(±1.2% trimsteps)
- Autonomous Battery Temperature Supervision
(0ºC-45ºC or 0ºC- 50ºC) for 10k and 100k NTC
- Charging Timeout (1h-8h in 30min steps)
- Charging in Stanby mode
- Completely Autonomous (no SW)
Power Management Features
- Wide Battery Supply Range 3.0…5.5V
- On-Chip Bandgap Tuning for High Accuracy (±1%)
- Thermal and Current Protection (int. sensor)
- Standby Mode exit by interrupt e.g. Onkey/RTC
Audio
- 94dB Audio DAC, 16-48kHz sampling rate
- Two Digital Audio Inputs (2 x I2S interface)
- 2.9V low Noise LDO for Audio DAC
- Two Headphone Amplifier Output with GND
separation
- Two I2S Inputs and one I2S Output
- I2S master mode with programmable sample rate
(controlled by internal PLL)
- GND Buffer for Headphone Amplifier
- Line/ Headphone outputs with GND separation
- Audio ADC, 82dB SNR with 16ksps
- Microphone Bias Supply and Amplifier (mono)
- 5 Band Adjustable Audio Equalizer (± 12dB in 3dB
gain steps)
- SPDIF Output
- Audio Mixer and Gain Stages
- PCM Interface
Real Time Clock (RTC)
- Alarm and Time function
- Repeated Wakeup (every second or minute)
- 32kHz output
- Backup Battery Charger and Switchover
Programmable System clock
- 1.6 MHz to 2.3 MHz with 100 kHz steps
Package
- BGA124 8x8mm, 0.5mm pitch (can be assembled
without micro via boards)
www.austriamicrosystems.com
Revision 1v13
1 - 157

1 page




AS3658 pdf
AS3658
Data Sheet Confidential - Applications
10.9 Real-Time Clock (RTC) Module ...............................................................................................................140
10.10 Touchpen Interface ................................................................................................................................143
11 Register map ................................................................................................................................... 148
12 Package Drawings and Marking .....................................................................................................154
12.1 Pinout Drawing (Top view) CTBGA 8x8mm .............................................................................................155
13 Ordering Information .......................................................................................................................156
Document Revision History
Table 1. Revision History
Chapter
Rev
1v00
9.1; 12
1v10
12,13
12,13
1v11
1v12
1v13
Description of Changes
-
- updated package drawings
- updated audio path drawings
- updated packagemarkings and ordering information
- updated packagemarkings and ordering information
- typo corrections
Date
23.3.2009
15.4.2009
23.9.2009
23.10.2009
23.9.2010
Author
pkm
pkm
pkm
pkm
pkm
www.austriamicrosystems.com
Revision 1v13
5 - 157

5 Page





AS3658 arduino
AS3658
Data Sheet Confidential - Pin Assignments
Table 2. Pin list CTBGA124, 8x8MM (AS3658)
Pin Name
VDAC
HP_CM
Pin Pin
Number Type
F13 A
B12 A
Supply
Description
VDAC
AVDD
2.9V Output voltage of one of DAC LDO; Connect a ceramic
capacitor of 1µF (±20%) or 2.2µF (+100%/-50%)
Bypass capacitor connection of common mode voltage of
Audio headphone amplifier (AVDD/2)
HP_CM_PWR D14 A AVDD Buffered voltage of HP_CM
LINE_CM
A12
A
ALVDD
Bypass capacitor connection of common mode voltage of
Audio line out amplifier (ALVDD/2)
LOUT_L
B11 A ALVDD Line out output Left channel
LOUT_R
A11 A ALVDD Line out output Right channel
ALVDD
D13 P
Supply pad of Line out amplifier
AVDD
E13 P
Supply pad of headphone amplifier
HPL1
A13 A AVDD Headphone output1 left channel
HPR1
C13 A AVDD Headphone output1 right channel
HPL2
C14 A AVDD Headphone output2 left channel
HPR2
B14 A AVDD Headphone output2 right channel
MICN
MICP
G11 A VDAC Microphone Input N
H11 A VDAC Microphone Input P
MICS
VSS
F11 A VSUPPLY Microphone Supply (2.95V) / Remote Input
BVSS
E11 P AVDD Power ground of headphone amplifier
VSSA
G9 VSS
Analog Ground Pad
VSSA
H9 VSS
Analog Ground Pad
VSSA
J8 VSS
Analog Ground Pad
NC/VSS_CP
A1 VSS
Analog Ground Pad
NC/VSSA
P1 VSS
Analog Ground Pad
NC/VSSA
P14 VSS
Analog Ground Pad
NC/BVSS
A14 VSS
Power ground of headphone amplifier
Note: The following are the Pin Types
I: Digital Input Pin
IPD: Digital Input Pin with internal pull-down resistor
IPU: Digital Input Pin with internal pull-up resistor
IODPU: Digital Input / Open Drain Output Pin with internal pull-up resistor
O: Digital Output Pin
OD: Digital Open Drain Output Pin; requires external pull-up resistor
IO: Digital Input / Output Pin
A: Analog Pin
P: Power Pin
www.austriamicrosystems.com
Revision 1v13
11 - 157

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet AS3658.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
AS3653Power Management Unitaustriamicrosystems
austriamicrosystems
AS3658Power and Audio Management Unitaustriamicrosystems
austriamicrosystems

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar