|
|
PDF A150XN01-V1 Data sheet ( Hoja de datos )
| Número de pieza | A150XN01-V1 | |
| Descripción | XGA TFT-LCD Semi-Module | |
| Fabricantes | AUO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de A150XN01-V1 (archivo pdf) en la parte inferior de esta página. Total 26 Páginas | ||
|
No Preview Available !
Product Specification
AU OPTRONICS CORPORATION
A150XN01 V1
() Preliminary Specification
(V) Final Specification
Module
Model Name
15” XGA TFT-LCD Semi-Module
A150XN01 V1- W02300508
Customer
Date
Checked &
Approved by
JC Fan
Date
08/17/2009
Approved by
Note: This Specification is subject to change without
notice.
Prepared by
Date
Joyce Kuo
08/17/2009
Audio-Video Display Business Unit /
AU Optronics corporation
document version 0.6
1/26
1 page  
Product Specification
AU OPTRONICS CORPORATION
A150XN01 V1
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when
handling.
7) Do not open or modify the Module Assembly.
8) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT Module.
9) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module even
momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting
forces are applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
document version 0.6
5/26
5 Page 
Product Specification
AU OPTRONICS CORPORATION
5. Electrical characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as follows:
A150XN01 V1
Symble
VDD
IDD
Parameter
Logic/LCD Drive
Voltage
VDD current
IDD VDD current
Irush
PDD
PDD
LCD Inrush Current
VDD Power
VDD Power
Note: Measurement conditions:
Min.
3.0
-
-
Typ.
3.3
600
500
930
1.98
1.65
Max.
3.6
630
525
1500
2.27
1.89
Unit Condition
[Volt] ±10%
[mA]
[mA]
VDD =3.3V , Black Pattern,
at 60Hz
VDD =3.3V , Gray-scale Pattern,
at 60Hz
[mA]
[Watt]
[Watt]
Vin rising time = 470us
VDD =3.3V , Black Pattern,
at 60Hz
VDD =3.3V , Gray-scale Pattern,
at 60Hz
++35..03VV
R1
47K
Q3
AO6402
D6
D5
D2
D1
S
(High to Low)
Control Signal
SW
+12.0V
R2
1K
VR1
47K
G
C3
0.01uF/25V
Q3
AO6402
C2
1uF/25V
0V
F1
C1
1uF/16V
VCVCDD
(LCD Module Input)
90%
10%
470 us
3.3V
Vin rising time
document version 0.6
11/26
11 Page | ||
| Páginas | Total 26 Páginas | |
| PDF Descargar | [ Datasheet A150XN01-V1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| A150XN01-V0 | XGA TFT-LCD Semi-Module | AUO |
| A150XN01-V1 | XGA TFT-LCD Semi-Module | AUO |
| A150XN01-V2 | LCD Module | AUO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |