|
|
PDF TN2-H-48V Data sheet ( Hoja de datos )
| Número de pieza | TN2-H-48V | |
| Descripción | SLIM POLARIZED RELAY | |
| Fabricantes | Panasonic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TN2-H-48V (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
TN RELAYSSLIM POLARIZED RELAY
14
.551
5.6
.220
9.8
.386
FEATURES
• Small header area makes higher den-
sity mounting possible
• Surge voltage withstand: 1500 V FCC
Part 68
• High sensitivity: 140 mW nominal op-
erating power (single side stable 3-12
V type)
• Self-clinching terminal also available
mm inch
SPECIFICATIONS
Contact
Arrangement
2 Form C
Initial contact resistance, max.
(By voltage drop 6 V DC 1A)
60 mΩ
Contact material
Gold-clad silver
Nominal switching capacity
(resistive load)
1 A 30 V DC,
0.5 A 125 V AC
Rating
Max. switching power
(resistive load)
Max. switching voltage
30 W, 62.5 VA
110 V DC,125 V AC
Max. switching current
1A
Min. switching capacity ❇1
10 µA 10 mV DC
Nominal
operating
power
Single side stable
1 coil latching
140 mW (3 to 12 V DC)
200 mW (24 V DC)
300 mW (48 V DC)
100 mW (3 to 12 V DC)
150 mW (24 V DC)
2 coil latching
200 mW (3 to 12 V DC)
300 mW (24 V DC)
Mechanical (at 180 cpm)
108
Expected
life (min.
operations)
Electrical
(at 20 cpm)
1 A 30 V DC
resistive load
0.5 A 125 V AC
resistive load
2 × 105
105
Note:
❇1This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the ac-
tual load. (SX relays are available for low level load switching [10 µA 1 mV DC –
10 mA 10 V DC])
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as "Initial breakdown voltage" section.
*2 By resistive method, nominal voltage applied to the coil; contact carrying current:
1 A.
*3 Nominal voltage applied to the coil, excluding contact bounce time.
*4 Nominal voltage applied to the coil, excluding contact bounce time without diode.
ORDERING INFORMATION
Characteristics
Initial insulation resistance*1
Initial
breakdown
voltage
Between open
contacts
Between contact and
coil
Between contact sets
FCC surge voltage between open
contacts
Temperature rise*2 (at 20°C)
Operate time [Set time]*3 (at 20°C)
Release time [Reset time]*4
(at 20°C)
Shock resistance
Functional*5
Destructive*6
Functional*7
Vibration resistance
Destructive
Conditions for oper-
ation, transport and
storage*8
(Not freezing and
condensing at low
temperature)
Unit weight
Ambient
temperature
Humidity
Min. 1,000 MΩ (at 500 V DC)
750 Vrms for 1 min.
(Detection current: 10 mA)
1,000 Vrms for 1 min.
(Detection current: 10 mA)
1,000 Vrms for 1 min.
(Detection current: 10 mA)
1,500 V
Max. 50°C
Max. 3 ms (Approx. 2 ms)
[Max. 3 ms (Approx. 2 ms)]
Max. 3 ms (Approx. 1 ms)
[Max. 3 ms (Approx. 2 ms)]
Min. 490 m/s2 {50G}
Min. 980 m/s2 {100G}
176.4 m/s2 {18G}, 10 to 55 Hz
at double amplitude of 3 mm
294 m/s2 {30G}, 10 to 55 Hz
at double amplitude of 5 mm
–40°C to +70°C
–40°F to +158°F
5 to 85% R.H.
Approx. 1.5 g .053 oz
*5 Half-wave pulse of sine wave: 11 ms; detection time: 10 µs.
*6 Half-wave pulse of sine wave: 6 ms.
*7 Detection time: 10 µs.
*8 Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT .
Ex. TN 2
L2 H
12V
Contact arrangement Operating function
Terminal shape
Coil voltage(DC)
2: 2 Form C
Nil: Single side stable Nil: Standard PC board terminal
L: 1 coil latching
H: Self-clinching terminal
L2: 2 coil latching
3,4.5,5,6,9,12,
24,48*V
*48 V coil type: Single side stable only
Note: AgPd stationary contact types available for high resistance against contact sticking.
When ordering, please add suffix “–3” like TN2–12V–3.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet TN2-H-48V.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TN2-H-48V | SLIM POLARIZED RELAY | Panasonic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |