TMP47C101P Datasheet PDF - Toshiba
| Part Number | TMP47C101P | |
| Description | CMOS 4-Bit Microcontroller | |
| Manufacturers | Toshiba | |
| Logo |  |
|
|
There is a preview and TMP47C101P download ( pdf file ) link at the bottom of this page. Total 30 Pages | ||
Preview 1 page No Preview Available !
TOSHIBA
TLCS-47E Series
CMOS 4-bit Microcontroller
TMP47C101P, TMP47C201P,
TMP47C101M, TMP47C201M
TMP47C101/201
The 47C101/201 are high speed and high performance 4-bit sin-
gle chip microcomputers, integrating ROM, RAM, input/output
ports and timer/counters on a chip. The 47C101/201 are the
standard type devices in the TLCS-47E series.
Part No.
TMP47C101P
TMP47C101M
mTMP47C201P
oTMP47C201M
ROM
1024 x 8-bit
2048 x 8-bit
RAM
64 x 4-bit
128 x 4-bit
Package
DIP16
SOP16
DIP16
SOP16
OTP
TMP47P201VP
T.B.D.
TMP47P201VP
T.B.D.
Piggyback + Adapter
TMP47C990E
+ BM1160 (for DIP)
.cFeatures
U• 4-bit single chip microcomputer
t4• Instruction execution time: 1.3µs (at 6MHz)
• Low voltage operation: 2.2V (at 2MHz RC)
• 89 basic instructions
e- Instruction set is the same as TLCS-47 series
e• ROM table look-up instructions
• Subroutine nesting: 15 levels max.
h• 5 interrupt sources (External: 2, Internal: 3)
- All sources have independent latches each, and multiple
Sinterrupt control is available
ta• I/O port (11 pins)
• 12-bit Timer/Counters (TC2)
a- Timer, event counter, and pulse width measurement
mode
• 12-bit programmable Timer (TC1)
.D• Interval Timer
• High current outputs
w- LED direct drive capability: typ. 20mA x 4 bits (Port R4)
• Hold function
w- Battery/Capacitor back-up
w• Real Time Emulator: BM4721A + BM1160 (for DIP)
The information contained here is subject to change without notice.
The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties
which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic
equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equip-
ments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types
of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.
TOSHIBA CORPORATION
1/32
|
| |
 
2.2 Program Memory (ROM)
Programs and fixed data are stored in the program memory.
The instruction to be executed next is read from the address
indicated by the contents of the PC.
The fixed data can be read by using the table look-up in-
structions.
• Table look-up instructions
[LDL A, @DC], [LDH A, @DC+]
The table look-up instructions read the lower and
upper 4 bits of the fixed data stored at the address
TMP47C101/201
specified in the data counter (DC) to place them into
the accumulator. [LDL A, @DC] instruction reads the
lower 4 bits of fixed data, and [LDH A, @DC+] instruc-
tion reads the upper 4 bits.
The DC is a 12-bit register, allowing it to address the
entire program memory space.
Example: When [LDL A, @DC] instruction is executed
with the DC value being 7AOH being 58H,
“8” is stored in the accumulator; when [LDH
A, @DC+] instruction is executed, “5” is
stored in the accumulator and the DC value
is incremented to 7A1H.
Figure 2-2. Configuration of Program Memory
2.2.1 Program Memory Capacity
The 47C101 has 1024 x 8 bits (addresses 000H through 3FFH)
of program memory (mask ROM), the 47C201 has 2048 x 8
bits (addresses 000H through 7FFH).
2.2.2 Program Memory Map
Figure 2-3 shows the program memory map. Address 000H -
086H of the program memory are also used for special pur-
poses. On the 47C101, no physical program memory exists in
the address range 400H through 7FFH. However, if this space
is accessed by program, the most significant bit of each
address is always regarded as “0” and the contents of the pro-
gram memory corresponding to the address is always
regarded as “0” and the contents of the program memory cor-
responding to the address 000H through 3FFH are read.
TOSHIBA CORPORATION
5/32
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for TMP47C101P electronic component. |
| Information | Total 30 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ TMP47C101P.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| TMP47C101 | The function is (TMP47C101 / TMP47C201) CMOS 4-bit Microcontroller. Toshiba Semiconductor |  |
| TMP47C101M | The function is CMOS 4-Bit Microcontroller. Toshiba | |
| TMP47C101MG | The function is CMOS 4-Bit Microcontroller. Toshiba | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
TMP4
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||