DataSheet26.com

HT-36B PDF даташит

Спецификация HT-36B изготовлена ​​​​«Littelfuse» и имеет функцию, называемую «Thyristor ( SCR )».

Детали детали

Номер произв HT-36B
Описание Thyristor ( SCR )
Производители Littelfuse
логотип Littelfuse логотип 

8 Pages
scroll

No Preview Available !

HT-36B Даташит, Описание, Даташиты
Teccor® brand Thyristors
Standard Bidirectional DIAC Trigger
HTxxx & HTMxxx & STxxx Series
Schematic Symbol
Applications
DIACs are used to trigger Triacs and SCRs in phase control
circuits for lamp dimming, universal motor speed control,
and heat control. They are used also for triggering
transistors in solid state ballast lighting controls.
Description
The HTM, HT, and ST series of bilateral trigger DIACs offer
a range of voltage characteristics from 27V to 70V. A DIAC
semiconductor is a full-wave or bidirectional Thyristor. It is
triggered from a blocking state to a conduction state for
either polarity of applied voltage whenever the amplitude of
applied voltage exceeds the breakover voltage of the DIAC.
Features & Benefits
t compliant
t#JMBUFSBMUSJHHFSJOHEFWJDF
t(MBTTQBTTJWBUFE
junctions
t8JEFWPMUBHFSBOHF
selections
t-POHUFSNSFMJBCJMJUZ
t1BSBNFUFSTUBCJMJUZ
t3FMJBCMFCBSSJFSBHBJOTU
junction contamination
ST Series:
t&QPYZ4.QBDLBHF
(DO-214)
t)JHIUFNQFSBUVSF TPMEFS
bonded die attachment
HTM/HT Series:
t.*/*.&-'%0USJHHFS
package
Absolute Maximum Ratings
Symbol
Parameter
ITRM Pulse On-State Current
TS
TJ
PD(AV)
Storage Temperature Range
Operating Junction Temperature
Device Power Dissipation
(*)Only Applies to HT-60
Notes:
1. Service Dissipation (at TA= -40°C to +40°C): 250mW for DO-35 and MINIMELF/SOD-80
and 300mW for DO214
2. Above +40°C, Derate: 3.6mW/°C for DO-35 and MINIMELF/SOD-80
and 3mW/°C for DO214
Test Conditions
120PPS, TA ≤ 40°C
pulse width = 10 μS
TA = -40°C to +40°C
Min Max Unit
2
1.5(*)
A
-40 +125
°C
-40 +125
°C
See Product
Selector Table
mW
©2008 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
337
Revised: July 9, 2008
HTxxx & HTMxxx & STxxx Series
http://www.Datasheet4U.com









No Preview Available !

HT-36B Даташит, Описание, Даташиты
Teccor® brand Thyristors
Standard Bidirectional DIAC Trigger
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Symbol
Description
Test Conditions
Min
Max
Unit
VBO
Breakover/Trigger Voltage
50/60Hz Sine Wave
See Product
Selector Table
See Product
Selector Table
V
ΔVBO
Breakover Voltage Symmetry
+VBO to -VBO
2(Note 1)
V
VBB
Δ Breakback Voltage(Note 4)
VBO to V10mA
VBO
to
V (*)
6mA
5V
15
V
VBB (DYN)
Dynamic Δ Breakback Voltage(Notes 2 & 3)
120 PPS
10
V
IBO
Breakover Current
50/60Hz Sine Wave
15 μA
(*) Only Applies to HT-60
Electrical Characteristic Notes:
1. Breakover voltage symmetry as close as 1V is available from the factory for
these products.
2. See Figure 4 and Figure 5 for test circuit and waveforms.
3. Typical switching time is 900 nano-seconds measured at IPK (Figure 4) across a
20 Ω resistor (Figure 5). Switching time is defined as rise time of IPK between the
10% to 90% points
4. See V-I Characteristics
Static Characteristics - Not Applicable
Product Selector
Part Number
XX-32
XX-32A/ 5761
XX-32B/ 5761A
XX-34B
XX-35
XX-36A/ 5762
XX-36B
XX-40
XX-60
“XX” = HTM for MINIMELF
HT for DO-35
ST for DO-214
MINIMELF
HTM-32B
—H
—H
—H
—H
Package Availability
DO-35
HT-32
HT-32A
HT-32B
T-34B
HT-35
HT-36A
T-36B
T-40
T-60
DO-214
ST-32
ST-32B
ST-34B
ST-35
ST-36A
ST-36B
ST-40
MIN
27V
28V
30V
32V
30V
32V
34V
35V
56V
VBO
MAX
37V
36V
34V
36V
40V
40V
38V
45V
70V
Thermal Resistances
Symbol
Description
RR(J-L)
Junction to Lead
RR(J-A)
Junction to Ambient
* Mounted on 1 cm2 copper foil surface; two-ounce copper foil
Test Conditions
Maximum Lead Temperature: 85°C
Maximum Lead Temperature: 90°C
Maximum Lead Temperature: 87°C
Free-Air
DO-35
DO-214
MINIMELF
DO-35
Value
100
65*
75
278
Unit
°C/W
°C/W
°C/W
°C/W
HTxxx & HTMxxx & STxxx Series
338
Revised: July 9, 2008
©2008 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.









No Preview Available !

HT-36B Даташит, Описание, Даташиты
Teccor® brand Thyristors
Standard Bidirectional DIAC Trigger
Figure 1: V-I Characteristics
 


 
  
 


 
  


Figure 2: Typical DIAC/Triac Full-wave Phase Control
Circuit
Resistive Load
3.3 k
120 V ac
60 Hz
200 k
Triac
MT2
G
MT1
0.1 μF
100 V
Diac
Figure 3: Repetitive Peak On-state Current vs. Pulse Duration
10
5.0
3.0
2.0
1.0 HT-32x, -34x, -35, -36x, -40
HT-5761, -5761A, -5762
0.5 ST-32x, -34x, -35, -36x, -40
0.3 HTM-32B
0.2
0.1 HT-60
0.05
0.03 Safe Operating
0.02 Area
.01
.005
.003
.002
.001
PULSE REPETITION RATE = 120 pps
TA = 40 ˚C
1
2 4 6 10
20 40 60 100
200
400
Base Pulse Duration – μs
1000
2000 4000 10000
Figure 4: Normalized VBO Change
vs. Junction Temperature
Figure 5: Test Circuit Waveforms
(Refer to Figure 5)
6%
4%
2%
0%
-2%
-4%
-6%
-8%
-40
-20
0 20 40 60 80 100 120 140
Junction Temperature (TJ) -- °C






 



 
      
©2008 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
339
Revised: July 9, 2008
HTxxx & HTMxxx & STxxx Series










Скачать PDF:

[ HT-36B.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
HT-36ABilateral Trigger DiacsTeccor Electronics
Teccor Electronics
HT-36AThyristor ( SCR )Littelfuse
Littelfuse
HT-36BBilateral Trigger DiacsTeccor Electronics
Teccor Electronics
HT-36BThyristor ( SCR )Littelfuse
Littelfuse

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск