DataSheet26.com

HMC5983 PDF даташит

Спецификация HMC5983 изготовлена ​​​​«Honeywell» и имеет функцию, называемую «3-Axis Digital Compass IC».

Детали детали

Номер произв HMC5983
Описание 3-Axis Digital Compass IC
Производители Honeywell
логотип Honeywell логотип 

28 Pages
scroll

No Preview Available !

HMC5983 Даташит, Описание, Даташиты
3-Axis Digital Compass IC
HMC5983
Advanced Information
The Honeywell HMC5983 is a temperature compensated three-axis integrated circuit magnetometer. This surface-mount,
multi-chip module is designed for low-field magnetic sensing for applications such as
automotive and personal navigation, vehicle detection, and pointing.
The HMC5983 includes our state-of-the-art, high-resolution HMC118X series
magnetoresistive sensors plus an ASIC containing amplification, automatic degaussing
strap drivers, offset cancellation, and a 12-bit ADC that enables 1° to 2° compass heading
accuracy. The I²C or SPI serial bus allows for easy interface. The HMC5983 is a
3.0x3.0x0.9mm surface mount 16-pin leadless chip carrier (LCC).
The HMC5983 utilizes Honeywell’s Anisotropic Magnetoresistive (AMR) technology that provides advantages over other
magnetic sensor technologies. Honeywell’s anisotropic, directional sensors excel in linearity, low hysteresis, null output
and scale factor stability over temperature, and with very low cross-axis sensitivity. These sensors’ solid-state
construction is designed to measure both the direction and the magnitude of magnetic fields, from milli-gauss to 8 gauss.
Honeywell’s Magnetic Sensors are among the most sensitive and reliable low-field sensors in the industry.
FEATURES
3-Axis Magnetoresistive Sensors and
ASIC in a 3.0x3.0x0.9mm LCC Surface
Mount Package
BENEFIT
Small size for Highly Integrated Products. Just add a micro-
controller interface, plus two external SMT Capacitors
designed for high volume, cost sensitive OEM Designs.
Easy to assemble & compatible with High Speed SMT Assembly.
Temperature Compensated Data Output Automatically maintains sensor’s sensitivity under wide operating
and Temperature Output
temperature range
Automatic Offset Compensation
12-Bit ADC Coupled with Low Noise
AMR Sensors Achieves 2 milli-gauss
Field Resolution
Maximizes sensors full dynamic range and resolution
Enables 1° to 2° degree compass heading accuracy
I²C (Standard, Fast, High-Speed modes) High-speed interfaces for fast data communications. I²C up to 3.4
or SPI Digital Interface
MHz and SPI up to 8.0 MHz
Fast 220 Hz Maximum Output Rate
Built-in Self Test
Enables Pedestrian Navigation and LBS Applications
Enables low-cost functionality test after assembly in production
Low Voltage Operations (2.16 to 3.6V)
and Low Power Consumption (100 μA)
Built-In Strap Drive Circuits
Lead Free Package Construction
Wide Magnetic Field Range (+/-8 Oe)
Software and Algorithm Support
Available
Compatible for battery powered applications
Set/reset and offset strap drivers for degaussing, self test, and offset
compensation. Eliminates sensor calibration necessary for other
magnetic sensor technologies.
RoHS Compliance
Sensors can be used in strong magnetic field environments with a 1°
to 2° degree compass heading accuracy
Compassing Heading, Hard Iron, Soft Iron, and Auto Calibration
libraries available
Free Datasheet http://www.Datasheet4U.com









No Preview Available !

HMC5983 Даташит, Описание, Даташиты
HMC5983
SPECIFICATIONS (* Tested and specified at 25°C except stated otherwise.)
Characteristics
Power Supply
Supply Voltage
Average Current Draw
Conditions*
VDD Referenced to AGND
VDDIO Referenced to DGND
Idle Mode
Measurement Mode (7.5 Hz ODR;
No measurement average, MA1:MA0 = 00)
Specified at: VDD = 2.5V, VDDIO = 1.8V
Min
2.16
1.71
-
-
Typ Max
Units
2.5 3.6
1.8 VDD+0.1
2-
100 -
Volts
Volts
μA
μA
Performance
Field Range
Mag Dynamic Range
Sensitivity (Gain)
Digital Resolution
Noise Floor
(Field Resolution)
Linearity
Hysteresis
Cross-Axis Sensitivity
Output Rate (ODR)
Measurement Period
Turn-on Time
Gain Tolerance
I²C Address
Clock Rate
I²C Hysteresis
Self Test
Temperature Sensor
Accuracy
Sensitivity Tempco
Full scale (FS)
3-bit gain control
VDD=3.0V, GN=0 to 7, 12-bit ADC
VDD=3.0V, GN=0 to 7, 1-LSb, 12-bit ADC
VDD=3.0V, GN=0, No measurement
average, Standard Deviation 100 samples
(See typical performance graphs below)
±2.0 gauss input range
±2.0 gauss input range
Test Conditions: Cross field = 0.5 gauss,
Happlied = ±3 gauss
Continuous Measurment Mode
Single Measurement Mode
From receiving command to data ready
Ready for I²C commands
Analog Circuit Ready for Measurements
All gain/dynamic range settings
8-bit read address
8-bit write address
Controlled by I²C /SPI Master
I²C
SPI
Hysteresis of Schmitt trigger inputs on SCL
and SDA - Fall (VDDIO=1.8V)
Rise (VDDIO=1.8V)
X & Y Axes
Z Axis
X & Y & Z Axes (GN=5) Positive Bias
X & Y & Z Axes (GN=5) Negative Bias
3σ at T > 0°C
3σ at T = -25°C
3σ at T = -40°C
TA = -40 to 85°C, Compensated Output
Temperature Sensor On
-8 +8
±1 ±8
230 1370
0.73 4.35
2
±25
±0.2%
0.1
0.75 220
160
6
200
50
±5
0x3D
0x3C
3400
8000
243
-575
0.2*VDDIO
0.8*VDDIO
±1.16
±1.08
-0.03
(3σ =0.12)
575
-243
7
11
14
gauss
gauss
LSb/gauss
milli-gauss
milli-gauss
±% FS
ppm
%FS/gauss
Hz
ms
μs
ms
%
hex
kHz
Volts
gauss
LSb
°C
%/°C
2 www.honeywell.com
Free Datasheet http://www.Datasheet4U.com









No Preview Available !

HMC5983 Даташит, Описание, Даташиты
HMC5983
Characteristics
General
ESD Voltage
Operating Temperature
Storage Temperature
Reflow Classification
Package Size
Package Height
Package Weight
Conditions*
Human Body Model (all pins)
Charged Device Model (all pins)
Ambient
Ambient, unbiased
MSL 3, 260 C Peak Temperature
Length and Width
Min Typ Max
2000
750
-30 85
-40 125
2.85 3.00 3.15
0.8 0.9 1.0
18
Units
Volts
°C
°C
mm
mm
mg
Absolute Maximum Ratings (* Tested at 25°C except stated otherwise.)
Characteristics
Min Max Units
Supply Voltage VDD
-0.3 4.8
Volts
Supply Voltage VDDIO
-0.3 4.8
Volts
Reflow Classification
MSL 3, 260 C Peak Temperature
PIN CONFIGURATIONS
Pin Name
1 SCL/SPI_SCK
2 VDD
3 NC
4 SPI_CS
5 SPI_SDO
6 I²C /~SPI
7 NC
8 SETP
9 SoC
10 C1
11 GND
12 SETC
13 VDDIO
14 NC
15 DRDY
16 SDA/SPI_SDI
Table 1: Pin Configurations
Description
Serial Clock I²C Master/Slave Clock or SPI Serial Clock
Power Supply (2.16V to 3.6V)
Not to be Connected
Chip Select line for SPI (active low). Tie to VDDIO for I²C Interface
SPI Serial Data Out
I²C / SPI selection pin. Connect to VDD for I²C (Also connect SPI_CS to VDDIO).
Connect to GND for SPI.
Not to be Connected
Set/Reset Strap Positive S/R Capacitor (C2) Connection
Start of Conversion (leading edge active) Connect to Ground when this
function/pad is not used in application.
Reservoir Capacitor (C1) Connection
Supply Ground
S/R Capacitor (C2) Connection Driver Side
IO Power Supply (1.71V to VDD)
Not to be Connected. No internal connection.
Data Ready, Interrupt Pin. Internally pulled high. Optional connection. Low for
>200 µsec when data are placed in the data output registers.
Serial Data I²C Master/Slave Data or SPI Serial Data In or SPI Serial Data I/O
(SDI/O) for 3-wire interface
www.honeywell.com
3
Free Datasheet http://www.Datasheet4U.com










Скачать PDF:

[ HMC5983.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
HMC598GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIERAnalog Devices
Analog Devices
HMC59833-Axis Digital Compass ICHoneywell
Honeywell

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск