|
|
Datasheet MAX223 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | MAX223 | +5V-Powered / Multichannel RS-232 Drivers/Receivers MAX220–MAX249
+5V-Powered, Multichannel RS-232 Drivers/Receivers
General Description
The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available.
The MAX225, MAX233, MAX235, | Maxim Integrated | driver |
2 | MAX223 | +5V-Powered / Multichannel RS-232 Drivers/Receivers MAX220–MAX249
+5V-Powered, Multichannel RS-232 Drivers/Receivers
General Description
The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available.
The MAX225, MAX233, MAX235, | Maxim Integrated Products | driver |
3 | MAX223 | +5V-Powered Multichannel RS-232 Drivers/Receivers MAX220–MAX249
+5V-Powered, Multichannel RS-232 Drivers/Receivers
General Description
The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available.
The MAX225, MAX233, MAX235, | Maxim Integrated | driver |
4 | MAX2232 | 900MHz ISM-Band / 250mW Power Amplifiers with Analog or Digital Gain Control 19-1470; Rev 0; 4/99
900MHz ISM-Band, 250mW Power Amplifiers with Analog or Digital Gain Control
General Description
The MAX2232/MAX2233 low-voltage, silicon RF power amplifiers (PAs) are designed for use in the 900MHz ISM band. They operate from a single +2.7V to +5.5V supply, allowing them to be | Maxim Integrated | amplifier |
5 | MAX2235 | +3.6V / 1W Autoramping Power Amplifier for 900MHz Applications 19-1463; Rev 0; 5/99
ANUAL N KIT M EET IO T A U EVAL TA SH WS DA FOLLO
+3.6V, 1W Autoramping Power Amplifier for 900MHz Applications
Features
o 800MHz to 1000MHz Operation o High Output Power at 836MHz +32.5dBm at +5.0V +30dBm at +3.6V +29dBm at +3.0V +28dBm at +2.7V o +2.7V to +5.5V Single-Supply | Maxim Integrated | amplifier |
MAX Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | MAX-2623 | Monolithic Voltage-Controlled Oscillators 19-1528; Rev 1; 5/00
NUAL KIT MA ATION EET H S A EVALU T WS DA FOLLO
Monolithic Voltage-Controlled Oscillators
General Description Features
o Fully Monolithic o Guaranteed Performance o On-Chip 50Ω Output Match o Wide Choice of Frequencies 855MHz to 881MHz (MAX2622) 885MHz to 950MHz (MAX2623) 94 Maxim Integrated Products oscillator | | |
2 | MAx-305 | Two-Position Actuators General Instructions MAx-305 & MAx-318 Series MAx-405 Through MAx-419 Series
Two-Position Actuators General Instructions
Application
For two-position operation of dampers, valves, and other equipment which require the return to normal position upon power interruption. Hazardous location models offer a sturdy cast alumi Schneider data | | |
3 | MAX-3510EEP | Upstream CATV Amplifier 19-1398; Rev 2; 8/99
UAL IT MAN TION K A ET U E L H A S EV TA WS DA FOLLO
Upstream CATV Amplifier
Features
o Ultra-Low Power-Up/Down Transients, 7mV Typical at 59dBmV Output o Single +5V Supply o Output Level Ranges from <8dBmV to 64dBmV o Gain Programmable in 1dB Steps o Low Transmit Output Noise Maxim Integrated amplifier | | |
4 | MAX-422 | HIGH CURRENT TRANSIENT VOLTAGE SUPPRESSOR MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com
MAXPak ™ Series
MAX-422
HIGH CURRENT TRANSIENT VOLTAGE SUPPRESSOR FEATURES
• UL 1449 Recogn ETC tvs-diode | | |
5 | MAX-6 | u-blox 6 GLONASS / GPS & QZSS modules locate, communicate, accelerate
LEA-6 / NEO-6 / MAX-6
u-blox 6 GLONASS, GPS & QZSS modules
Hardware Integration Manual
Abstract
This document describes the features and specifications of the cost effective and high-performance LEA-6, NEO-6 and MAX-6 GPS and GPS/GLONASS/QZSS modules featuring the u- ublox data | | |
6 | MAX-6G | u-blox 6 GLONASS / GPS & QZSS modules locate, communicate, accelerate
LEA-6 / NEO-6 / MAX-6
u-blox 6 GLONASS, GPS & QZSS modules
Hardware Integration Manual
Abstract
This document describes the features and specifications of the cost effective and high-performance LEA-6, NEO-6 and MAX-6 GPS and GPS/GLONASS/QZSS modules featuring the u- ublox data | | |
7 | MAX-6Q | u-blox 6 GLONASS / GPS & QZSS modules locate, communicate, accelerate
LEA-6 / NEO-6 / MAX-6
u-blox 6 GLONASS, GPS & QZSS modules
Hardware Integration Manual
Abstract
This document describes the features and specifications of the cost effective and high-performance LEA-6, NEO-6 and MAX-6 GPS and GPS/GLONASS/QZSS modules featuring the u- ublox data | |
Esta página es del resultado de búsqueda del MAX223. Si pulsa el resultado de búsqueda de MAX223 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |