DataSheet.es    


PDF MX29GL256F Data sheet ( Hoja de datos )

Número de pieza MX29GL256F
Descripción SINGLE VOLTAGE 3V ONLY FLASH MEMORY
Fabricantes MACRONIX 
Logotipo MACRONIX Logotipo



Hay una vista previa y un enlace de descarga de MX29GL256F (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! MX29GL256F Hoja de datos, Descripción, Manual

MX29GL256F
MX29GL256F
DATASHEET
P/N:PM1544
REV. 1.5, OCT. 30, 2013
1
http://www.Datasheet4U.com

1 page




MX29GL256F pdf
MX29GL256F
FEATURES
SINGLE VOLTAGE 3V ONLY FLASH MEMORY
GENERAL FEATURES
• Power Supply Operation
- 2.7 to 3.6 volt for read, erase, and program operations
- MX29GL256F H/L: VI/O=VCC=2.7V~3.6V, VI/O voltage must tight with VCC
- MX29GL256F U/D: VI/O=1.65V~3.6V for Input/Output
• Byte/Word mode switchable
- 33,554,432 x 8 / 16,777,216 x 16
• 64KW/128KB uniform sector architecture
- 256 equal sectors
• 16-byte/8-word page read buffer
• 64-byte/32-word write buffer
• Extra 128-word sector for security
- Features factory locked and identifiable, and customer lockable
• Advanced sector protection function (Solid and Password Protect)
• Latch-up protected to 100mA from -1V to 1.5xVcc
• Low Vcc write inhibit : Vcc ≤ VLKO
• Compatible with JEDEC standard
- Pinout and software compatible to single power supply Flash
• Deep power down mode
PERFORMANCE
• High Performance
- Fast access time:
- MX29GL256F H/L: 100ns (VCC=2.7~3.6V), 90ns (VCC=3.0~3.6V)
- MX29GL256F U/D: 110ns (VCC=2.7~3.6V, V I/O=1.65 to Vcc)
- Page access time:
- MX29GL256F H/L: 25ns
- MX29GL256F U/D: 30ns
- Fast program time: 10us/word
- Fast erase time: 0.5s/sector
• Low Power Consumption
- Low active read current: 10mA (typical) at 5MHz
- Low standby current: 20uA (typical)
Minimum 100,000 erase/program cycle
• 20 years data retention
SOFTWARE FEATURES
• Program/Erase Suspend & Program/Erase Resume
- Suspends sector erase operation to read data from or program data to another sector which is not being
erased
- Suspends sector program operation to read data from another sector which is not being program
• Status Reply
- Data# Polling & Toggle bits provide detection of program and erase operation completion
• Support Common Flash Interface (CFI)
HARDWARE FEATURES
• Ready/Busy# (RY/BY#) Output
- Provides a hardware method of detecting program and erase operation completion
• Hardware Reset (RESET#) Input
- Provides a hardware method to reset the internal state machine to read mode
• WP#/ACC input pin
- Hardware write protect pin/Provides accelerated program capability
PACKAGE
• 56-Pin TSOP
• 56-Ball FBGA (7mm x 9mm)
• 64-Ball LFBGA (11mm x 13mm)
All devices are RoHS Compliant and Halogen-free
P/N:PM1544
REV. 1.5, OCT. 30, 2013
5
http://www.Datasheet4U.com

5 Page





MX29GL256F arduino
MX29GL256F
BUS OPERATION
Table 2-1. BUS OPERATION
Mode Select
RE-
SET#
CE#
WE# OE#
Device Reset
Standby Mode
Output Disable
L
Vcc ±
0.3V
H
Read Mode
H
Write
H
Accelerate Program H
X
Vcc±
0.3V
L
L
L
L
X
X
H
H
L
L
X
X
H
L
H
H
Address
(Note4)
X
X
X
AIN
AIN
AIN
Data
I/O
Q7~Q0
HighZ
Byte#
Vil Vih
Data (I/O)
Q15~Q8
HighZ HighZ
WP#/
ACC
L/H
HighZ HighZ HighZ
H
HighZ HighZ
DOUT Q8-Q14=
DIN HighZ,
DIN Q15=A-1
HighZ
DOUT
DIN
DIN
L/H
L/H
Note1,2
Vhv
Notes:
1. The first or last sector was protected if WP#/ACC=Vil.
2. When WP#/ACC = Vih, the protection conditions of the outmost sector depends on previous protection condi-
tions. Refer to the advanced protect feature.
3. Q0~Q15 are input (DIN) or output (DOUT) pins according to the requests of command sequence, sector pro-
tection, or data polling algorithm.
4. In Word Mode (Byte#=Vih), the addresses are AM to A0, AM: MSB of address.
In Byte Mode (Byte#=Vil), the addresses are AM to A-1 (Q15), AM: MSB of address.
P/N:PM1544
11
REV. 1.5, OCT. 30, 2013
http://www.Datasheet4U.com

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet MX29GL256F.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MX29GL256E64m-bit Single Voltage 3V ONLY Uniform Sector Flash MemoryMacronix America
Macronix America
MX29GL256FSINGLE VOLTAGE 3V ONLY FLASH MEMORYMACRONIX
MACRONIX

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar