DataSheet26.com

AD584 PDF даташит

Спецификация AD584 изготовлена ​​​​«Analog Devices» и имеет функцию, называемую «Precision Voltage Reference».

Детали детали

Номер произв AD584
Описание Precision Voltage Reference
Производители Analog Devices
логотип Analog Devices логотип 

12 Pages
scroll

No Preview Available !

AD584 Даташит, Описание, Даташиты
Data Sheet
FEATURES
Four programmable output voltages
10.000 V, 7.500 V, 5.000 V, and 2.500 V
Laser-trimmed to high accuracies
No external components required
Trimmed temperature coefficient
15 ppm/°C maximum, 0°C to 70°C (AD584K)
15 ppm/°C maximum, −55°C to +125°C (AD584T)
Zero output strobe terminal provided
2-terminal negative reference: capability (5 V and above)
Output sources or sinks current
Low quiescent current: 1.0 mA maximum
10 mA current output capability
MIL-STD-883 compliant versions available
GENERAL DESCRIPTION
The AD584 is an 8-terminal precision voltage reference offering
pin programmable selection of four popular output voltages:
10.000 V, 7.500 V, 5.000 V and 2.500 V. Other output voltages,
above, below, or between the four standard outputs, are available by
the addition of external resistors. The input voltage can vary
between 4.5 V and 30 V.
Laser wafer trimming (LWT) is used to adjust the pin
programmable output levels and temperature coefficients,
resulting in the most flexible high precision voltage reference
available in monolithic form.
In addition to the programmable output voltages, the AD584
offers a unique strobe terminal that permits the device to be
turned on or off. When the AD584 is used as a power supply
reference, the supply can be switched off with a single, low power
signal. In the off state, the current drained by the AD584 is reduced
to approximately 100 µA. In the on state, the total supply current is
typically 750 µA, including the output buffer amplifier.
The AD584 is recommended for use as a reference for 8-, 10-,
or 12-bit digital-to-analog converters (DACs) that require an
external precision reference. In addition, the device is ideal for
analog-to-digital converters (ADCs) of up to 14-bit accuracy,
either successive approximation or integrating designs, and in
general, it can offer better performance than that provided by
standard self-contained references.
Pin Programmable,
Precision Voltage Reference
AD584
PIN CONFIGURATIONS
TAB
8
10.0V 1 V+ 7 CAP
AD584
5.0V 2 TOP VIEW 6 VBG
(Not to Scale)
2.5V 3
5 STROBE
4
COMMON
Figure 1. 8-Pin TO-99
10.0V 1
5.0V 2
2.5V 3
COMMON 4
AD584
TOP VIEW
(Not to Scale)
8 V+
7 CAP
6 VBG
5 STROBE
Figure 2. 8-Lead PDIP
The AD584J and AD584K are specified for operation from 0°C
to +70°C, and the AD584S and AD584T are specified for the
−55°C to +125°C range. All grades are packaged in a hermetically
sealed, eight-terminal TO-99 metal can, and the AD584J and
AD584K are also available in an 8-lead PDIP.
PRODUCT HIGHLIGHTS
1. The flexibility of the AD584 eliminates the need to design-
in and inventory several different voltage references.
Furthermore, one AD584 can serve as several references
simultaneously when buffered properly.
2. Laser trimming of both initial accuracy and temperature
coefficient results in very low errors overtemperature
without the use of external components.
3. The AD584 can be operated in a 2-terminal Zener mode at
a 5 V output and above. By connecting the input and the
output, the AD584 can be used in this Zener configuration
as a negative reference.
4. The output of the AD584 is configured to sink or source
currents. This means that small reverse currents can be
tolerated in circuits using the AD584 without damage to
the reference and without disturbing the output voltage
(10 V, 7.5 V, and 5 V outputs).
5. The AD584 is available in versions compliant with MIL-STD-
883. Refer to the Analog Devices current AD584/883B data
sheet for detailed specifications. This can be found under the
Additional Data Sheets section of the AD584 product page.
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©1978–2012 Analog Devices, Inc. All rights reserved.
Free Datasheet http://www.Datasheet4U.com









No Preview Available !

AD584 Даташит, Описание, Даташиты
AD584
TABLE OF CONTENTS
Features .............................................................................................. 1
Pin Configurations ........................................................................... 1
General Description ......................................................................... 1
Product Highlights ........................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Absolute Maximum Ratings............................................................ 5
ESD Caution.................................................................................. 5
Theory of Operation ........................................................................ 6
Applying the AD584 .................................................................... 6
Performance over Temperature .................................................. 7
REVISION HISTORY
5/12—Rev. B to Rev. C
Deleted AD584L .................................................................Universal
Changes to Features Section, General Description Section and
Product Highlights Section ............................................................. 1
Deleted Metalization Photograph .................................................. 4
Changes to 10 V Reference with Multiplying CMOS DACs or
ADCs Section.................................................................................... 9
Changes to Precision DAC Reference Section and Figure 19... 10
Updated Outline Dimensions ....................................................... 11
Changes to Ordering Guide .......................................................... 12
7/01—Rev. A to Rev. B
Data Sheet
Output Current Characteristics...................................................7
Dynamic Performance..................................................................7
Noise Filtering ...............................................................................8
Using the Strobe Terminal ...........................................................8
Percision High Current Supply....................................................8
The AD584 as a Current Limiter.................................................9
Negative Reference Voltages from an AD584 ...............................9
10 V Reference with Multiplying CMOS DACs or ADCs .......9
Precision DAC Reference .......................................................... 10
Outline Dimensions ....................................................................... 11
Ordering Guide .......................................................................... 12
Rev. C | Page 2 of 12
Free Datasheet http://www.Datasheet4U.com









No Preview Available !

AD584 Даташит, Описание, Даташиты
Data Sheet
AD584
SPECIFICATIONS
VIN = 15 V and 25°C, unless otherwise noted.
Specifications shown in boldface are tested on all production units at final electrical test. Results from those tests are used to calculate
outgoing quality levels. All minimum and maximum specifications are guaranteed; although, only those shown in boldface are tested on
all production units.
Table 1.
Model
OUTPUT VOLTAGE TOLERANCE
Maximum Error at Pin 1 for Nominal
Outputs of
10.000 V
7.500 V
5.000 V
2.500 V
OUTPUT VOLTAGE CHANGE
Maximum Deviation from 25°C Value, TMIN to TMAX1
10.000 V, 7.500 V, and 5.000 V Outputs
2.500 V Output
Differential Temperature Coefficients Between Outputs
QUIESCENT CURRENT
Temperature Variation
TURN-ON SETTLING TIME TO 0.1%
NOISE (0.1 Hz TO 10 Hz)
LONG-TERM STABILITY
SHORT-CIRCUIT CURRENT
LINE REGULATION (NO LOAD)
15 V ≤ VIN ≤ 30 V
(VOUT + 2.5 V) ≤ VIN ≤ 15 V
LOAD REGULATION
0 ≤ IOUT ≤ 5 mA, All Outputs
OUTPUT CURRENT
VIN ≥ VOUT + 2.5 V
Source at 25°C
Source TMIN to TMAX
Sink TMIN to TMAX
TEMPERATURE RANGE
Operating
Storage
PACKAGE OPTION
8-Pin Metal Header (TO-99, H-08)
8-Lead Plastic Dual In-Line Package (PDIP, N-8)
AD584J
Min Typ
Max
AD584K
Min Typ
Max
Unit
±30
±20
±15
±7.5
±10
±8
±6
±3.5
mV
mV
mV
mV
30
30
5
0.75 1.0
1.5
200
50
25
30
0.002
0.005
20 50
15 ppm/°C
15 ppm/°C
3 ppm/°C
0.75 1.0 mA
1.5 µA/°C
200 µs
50 µV p-p
25 ppm/1000 Hrs
30 mA
0.002 %/V
0.005 %/V
20 50 ppm/mA
10 10
55
55
mA
mA
mA
0 70 0
−65 +175 −65
70 °C
+175 °C
AD584JH
AD584JN
AD584KH
AD584KN
1 Calculated as average over the operating temperature range.
Rev. C | Page 3 of 12
Free Datasheet http://www.Datasheet4U.com










Скачать PDF:

[ AD584.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
AD580High Precision 2.5 V IC ReferenceAnalog Devices
Analog Devices
AD581High Precision 10 V IC ReferenceAnalog Devices
Analog Devices
AD582Low Cost Sample/Hold AmplifierAnalog Devices
Analog Devices
AD5821single 10-bit digital-to-analog converterAnalog Devices
Analog Devices

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск