DataSheet26.com

V23042-B2351-B101 PDF даташит

Спецификация V23042-B2351-B101 изготовлена ​​​​«Siemens» и имеет функцию, называемую «High Dielectric Polarized PC Board Relay».

Детали детали

Номер произв V23042-B2351-B101
Описание High Dielectric Polarized PC Board Relay
Производители Siemens
логотип Siemens логотип 

2 Pages
scroll

No Preview Available !

V23042-B2351-B101 Даташит, Описание, Даташиты
Features
• 5A switching capacity.
• Meets FCC Part 68 isolation.
• Temperature compensated over operating range.
• No magnetic interference between adjacent relays.
• 2 Form C contact arrangement.
• Standard 0.1” x 0.3” grid spacing in a DIP configuration.
• Standard or sensitive DC coils through 48 volts.
• Well suited for audio communications circuits, logic and process control,
vending machines and office automation applications.
• Immersion cleanable, plastic sealed case.
Contact Data
Arrangement: Bifurcated cross bar in 2 Form C (DPDT).
Material: Stationary Contacts: B101: Silver, gold plated.
B201: Palladium-silver, gold plated.
Movable Contacts: Palladium-silver.
Ratings: Max. Switching Voltage: 250VDC, 220VAC.
Max. Switching Power:
DC (resistive load): 50-150W (see Figure 1 – Limiting Curve).
AC (resistive load): 250VA.
Max. Switching Current: 5A, DC or AC.
Min. Switching Current: 0.1mA, 10 mVDC.
Max. Carrying Current: 2A, DC or AC (@85°C).
Expected Mechanical Life: 20 million operations.
Expected Electrical Life: 300,000 ops. @ 5.0A, 12VDC, resistive.
2.5 million ops. @ 1.0A, 24VDC, resistive.
100,000 ops. @ 1.0A, 250VAC, resistive.
Initial Contact Resistance: 50 milliohms, max., @ 10mA, 20mV.
Note: Verify in application for suitability to environmental and expected reliability levels.
Figure 1 - Limiting Curve For DC Power Load
400
300
100 W
200 W
250
200 Curve I
-B201
100
50
40
30
20
10
.1
516 OHM
50 W
199 OHM
100
OHM
50.8
OHM
20.6
OHM
11.8
OHM
1
Curve II
-B101 - B201
Curve I
-B101
4.95 OHM
10
Switching Current (Amps DC)
Curve I: Arc extinguishes before transit period.
Curve II: The burning time of the arc must not exceed 10 ms for 1000 operations.
Initial Dielectric Strength
Between Open Contacts: 1,000V rms, 60 Hz.
1,500V FCC Part 68 surge test.
Between Contact Sets: 1,500V rms, 60 Hz.
1,500V FCC Part 68 surge test.
Contact to Coil: Single Coil: 1,500V rms, 60 Hz.
1,500V FCC Part 68 surge test.
Dual Coil: 1,000V rms, 60 Hz.
1,500V FCC Part 68 surge test.
Between Dual Coils: 400V rms, 60 Hz.
Initial Insulation Resistance
Between Mutually Insulated Terminals: 109 ohms @ 500VDC.
Coil Data @ 20°C
Voltage: 3 through 48VDC.
Maximum Continuous Coil Power: 760 milliwatts.
Temperature Rise: 105°C per watt, typ.
Maximum Coil Temperature: 100°C.
V23042 series
2 Pole, High Dielectric Polarized
PC Board Relay
File E48393
File LR50227
Coil Data @ 20°C
Ultra-Sensitive (“150mW”)
Non-Latching
Single Coil Latching
Nom.
Coil
Voltage
Coil Res. Nom. Coil Coil Res. Nom. Coil
± 10%
Power
± 10%
Power
(ohms)
(mW)
(ohms)
(mW)
3
60 150
120 75
5
165 150
330 75
6
240 150
480 75
9 540 150 1080 75
12
960 150 1,920
75
15
1,500
150
3,000
75
24
3,840
150
7,680
75
Dual Coil Latching
Coil Res. Nom. Coil
± 10%
Power
(ohms)
(mW)
60 150
167 150
240 150
540 150
960 150
1,500
150
3,840
150
Nom.
Coil
Voltage
3
5
6
9
12
15
24
48
Sensitive (“200mW”)
Non-Latching
Single Coil Latching
Coil Res. Nom. Coil Coil Res. Nom. Coil
± 10%
Power
± 10%
Power
(ohms)
(mW)
(ohms)
(mW)
45 200
90 100
125 200
250 100
180 200
405 200
720 200
360
810
1,440
100
100
100
1,125
200
2,200
100
2,880
11,520
200
200
4,000
N/A
144
N/A
Dual Coil Latching
Coil Res. Nom. Coil
± 10%
Power
(ohms)
(mW)
45 200
125 200
180 200
375 200
720 200
1,125
200
2,040
N/A
280
N/A
Nom.
Coil
Voltage
3
5
6
9
12
15
24
48
Intermediate Sensitivity (“260mW”)
Non-Latching
Single Coil Latching
Coil Res. Nom. Coil Coil Res. Nom. Coil
± 10%
Power
± 10%
Power
(ohms)
(mW)
(ohms)
(mW)
36
95
135
300
600
860
2,210
6,330
250
260
260
270
240
260
260
360
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
Dual Coil Latching
Coil Res. Nom. Coil
± 10%
Power
(ohms)
(mW)
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
Operate Data @ 20°C
Must Operate Voltage:
Intermediate sensitivity: 70% of nominal voltage or less.
Sensitive: 75% of nominal voltage or less.
Ultra-sensitive: 80% of nominal coil voltage or less.
Must Release Voltage (non-latching): 10% of nominal voltage or more.
Operate Time (Excluding Bounce)†: 5 ms, max. ( 3 ms, typical).
Release Time (Excluding Bounce)†: 3 ms, max. ( 2 ms, typical).
Reset Time (Latching)†: 5 ms, max. ( 3 ms, typical).
Bounce Time†: 3 ms, max.
† At or from Nominal Coil Voltage
Environmental Data
Temperature Range: -40°C to +85°C (see Figure 2 – Temp. vs. Voltage).
Vibration: Operational: 50g from 10-500 Hz.; 10g from 500-2,000 Hz.
Shock: Operational: 50g at 11 ms 1/2 sinusoidal impulse.
Mechanical Data
Termination: Printed circuit terminals on 0.1” (2.54mm) centers.
Enclosure: Sealed plastic case.
Weight: 0.18 oz. (5g) approximately.
Free Datasheet http://www.datasheet.in/









No Preview Available !

V23042-B2351-B101 Даташит, Описание, Даташиты
Ordering Information
Typical Part Number B
1. Basic Series:
V23042 = Miniature, PC board relay.
2. Functional Type:
Non-Latching Dual Coil Latching Single Coil Latching
A2 B2
C2
V23042
A2
00
3. Coil Sensitivity:
00 = Non-latching, 260mW
30 = Non-latching, 200mW
60 = Non-latching, 150mW
20 = Dual coil latching, 200mW
35 = Dual coil latching, 150mW
10 = Single coil latching, 100mW
15 = Single coil latching, 75mW
4. Coil Voltage:
1 = 5VDC
3 = 12VDC
2 = 6VDC
4 = 15VDC
5 = 24VDC
6 = 9VDC
7 = 48VDC*
8 = 3VDC
5. Contact Type:
B101 = Bifurcated, 2 Form C, silver, gold plated to palladium silver. (Standard stock)
B201 = Bifurcated, 2 Form C; palladium silver, gold-plated to palladium silver. (Special)
* Non-latching only.
1 B101
Stock Items – The following items are normally maintained in stock for immediate delivery.
V23042A2001B101
V23042A2003B101
V23042A2005B101
V23042A2007B101
V23042A2301B101
V23042A2303B101
V23042A2305B101
V23042A2307B101
V23042A2601B101
V23042A2603B101
V23042B2201B101
V23042B2203B101
V23042B2205B101
V23042B2351B101
V23042B2353B101
V23042B2355B101
Outline Dimensions
.795 MAX.
(20.2)
.422 MAX.
(10.7)
.400 MAX.
(10.2)
.115-.138
(2.9-3.5)
.020 MIN.
DUAL COIL LATCHING (.5)
RELAYS ONLY
Coil Terminals: 0.015” (.38mm) dia. typical.
Contact Terminals: 0.020” (.5mm) x .010” (.25mm) typical.
(0.020” dimension is measured in the direction of the
.795” dimension of the relay.)
PC Board Layout (Bottom View)
.100 TYP.
(2.54)
.300
(7.62)
.100 TYP.
(2.54)
DUAL COIL
LATCHING
RELAYS ONLY
.039 DIA.
(.99)
Tolerance: ± .004 (.10)
Wiring Diagrams (Bottom Views)
Single Coil Non-Latching & Single Coil Latching
9 11 13 16
N.O. N.C. COM –
N.O. N.C. COM +
864 1
For non-latching versions, coil polarity
must be observed.
For single coil latching versions, polarity
shown results in “set” condition.
Reverse polarity results in “reset”
condition.
Diagram indicates de-energized position
for non-latching and “reset” position for
single coil latch.
Dual Coil Latching
9 11 13 15 16
SET RST COM – –
SET RST. COM + +
8 6 4 21
Diagram indicates relay in the “reset”
position, with terminals 2 and 15 most
recently energized. Energizing terminals
1 and 16 will transfer the contacts.
Siemens Electromechanical Components, Inc.
700 Westpark Drive
Peachtree City, GA 30269-1498
Specifications and availability subject to change without notice.
13C8042
Printed in U.S.A.
IH/10-98
Free Datasheet http://www.datasheet.in/










Скачать PDF:

[ V23042-B2351-B101.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
V23042-B2351-B101High Dielectric Polarized PC Board RelaySiemens
Siemens

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск