|
|
PDF AH1812 Data sheet ( Hoja de datos )
| Número de pieza | AH1812 | |
| Descripción | HIGH SENSIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH | |
| Fabricantes | Diodes | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AH1812 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
AH1812
HIGH SENSIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH
Description
The AH1812 is a high sensitivity micropower Omnipolar Hall effect
switch IC with an open drain output. Designed for portable and battery
powered equipment such as cellular phones and portable PCs, the
average supply current is only 4.3µA at 1.85V. To support potable
equipment the AH1812 can operate over the supply range of 1.6V to
3.6V and uses a hibernating clocking system to minimize the power
consumption. To minimize PCB space the AH1812 is available in
small low profile X1-DFN1216-4 package
The open drain output is activated with either a North or South pole of
sufficient magnetic field strength. When the magnetic flux density (B)
perpendicular to the package is larger than operate point (Bop), the
output will be turned on (pulled low). The output is turned off when
B becomes lower than the release point (Brp). The output will remain
off when there is no magnetic field.
Pin Assignments
(Top View)
X1-DFN1216-4
Features
Omnipolar Operation (North or South Pole)
Supply Voltage of 1.6V to 3.6V
High Sensitivity
Micropower Operation
Chopper Stabilized Design Provides:
Superior Temperature Stability
Extremely Low Switch-Point Drift
Enhanced Immunity to Stress
Open Drain Output for System Flexibility
Good RF Noise Immunity
-40°C to +85°C Operating Temperature
Small and Low Profile X1-DFN1216-4 Package
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Applications
Cover or Display Switch in Portable PCs
Open and Close Detect for Cellular Phones
Holster Detect for Cellular Phones and Tablet PCs
Digital Still and Video Cameras
Contact-Less Switches
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Typical Applications Circuit (Note 4)
Note:
4. CIN is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 10nF to 100nF.
RL is the pull-up resistor, the recommended resistance is 10kΩ to 100kΩ.
AH1812
Document number: DS36171 Rev. 2 - 2
1 of 8
www.diodes.com
August 2013
© Diodes Incorporated
Free Datasheet http://www.datasheet4u.com/
1 page  
Typical Operating Characteristics
40
VDD = 1.6V
30
20
10
0
-10
-20
-30
-40
-50
-25
0 25 50
Temperature (°C)
75
Switch Points vs Temperature
Bops
Brps
Bhy
Brpn
Bopn
100
40
VDD = 3.6V
30
20
10
0
-10
-20
-30
-40
-50 -25 0 25 50 75
Temperature (°C)
Switch Points vs Temperature
Bops
Brps
Bhy
Brpn
Bopn
100
10
9
8
7 3.6V
6 3.3V
5
4 1.6V
3
2
1
0
-50 -25 0 25 50 75 100
Temperature (°C)
Average Supply Current vs. Temperature
AH1812
40
VDD = 3.0V
30
20
10
0
-10
-20
-30
-40
-50 -25 0 25 50 75
Temperature (°C)
Switch Points vs Temperature
Bops
Brps
Bhy
Brpn
Bopn
100
40
TA = +25 °C
30
20
10
0
-10
-20
-30
-40
1.5 1.8 2.1 2.4 2.7 3 3.3
Supply Voltage (V)
Switch Points vs Supply Voltage
Bops
Brps
Bhys
Brpn
Bopn
3.6 3.9
10
9 TA = +25°C
8
7
6
5
4
3
2
1
0
1.6 1.9 2.2 2.5 2.8 3.1 3.4 3.7
Supply voltage (V)
Average Supply Current vs. Supply Voltage
AH1812
Document number: DS36171 Rev. 2 - 2
5 of 8
www.diodes.com
August 2013
© Diodes Incorporated
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet AH1812.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AH1812 | HIGH SENSIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH | Diodes |
| AH1815 | LOW SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH | Diodes |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |