DataSheet26.com

G150XG03-V0 PDF даташит

Спецификация G150XG03-V0 изготовлена ​​​​«AUO» и имеет функцию, называемую «LCD Module».

Детали детали

Номер произв G150XG03-V0
Описание LCD Module
Производители AUO
логотип AUO логотип 

30 Pages
scroll

No Preview Available !

G150XG03-V0 Даташит, Описание, Даташиты
www.DataSheet4U.net
Product Specification
G150XG03 V.0
Document version: 0.1
Date 1/20/2006
Product Specification
15.0XGA Color TFT-LCD Module
Model Name: G150XG03
V.0
(u ) Preliminary Specifications
( ) Final Specifications
Note: This Specification is subject to change without notice.
document ver 0.0
2/31









No Preview Available !

G150XG03-V0 Даташит, Описание, Даташиты
www.DataSheet4U.net
Product Specification
G150XG03 V.0
Record of Revision
Version and
Page
Date
Old description
0.0 2005/012/22 All First Edition for Customer
New Description
Remark
0.1 2006/1/20
5
6
15
w w w . D a t a S h e e t 4 U . c o m15
Only define white luminance and power Add white luminance and power
consumption @ 8mA IRCFL
consumption @ 6.5mA IRCFL
Only define white luminance @ 8mA Add white luminance @ 6.5mA IRCFL
IRCFL
Only define power consumption @ 8mA Add power consumption @ 6.5mA
IRCFL
IRCFL
Only define lamp life time@ 8mA
IRCFL
Add the lamp life time @ 6.5mA
IRCFL
document ver 0.0
3/31









No Preview Available !

G150XG03-V0 Даташит, Описание, Даташиты
www.DataSheet4U.net
Product Specification
G150XG03 V.0
1.0 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when
handling.
7) Do not open nor modify the Module Assembly.
8) Do not press or pat the panel surface by fingers,hand or tooling.
www.DataSheet4U.com
9) Do not press the reflector sheet at the back of the module to any directions.
10) In case if a module has to be put back into the packing container slot after once it was taken out from the
container, do not press the center of the CCFL reflector edge. Instead, press at the far ends of the CCFL
reflector edge softly. Otherwise the TFT module may be damaged.
11) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT module.
12) After installation of the TFT module into an enclosure (Desktop monitor Bezel, for example), do not twist
nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into
consideration that no bending/twisting forces are applied to the TFT module from outside. Otherwise the
TFT module may be damaged.
document ver 0.0
4/31










Скачать PDF:

[ G150XG03-V0.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
G150XG03-V0LCD ModuleAUO
AUO
G150XG03-V1LCD ModuleAUO
AUO
G150XG03-V2LCD ModuleAUO
AUO
G150XG03-V3LCD ModuleAUO
AUO

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск