DataSheet26.com

AYF53 PDF даташит

Спецификация AYF53 изготовлена ​​​​«Panasonic» и имеет функцию, называемую «Connectors».

Детали детали

Номер произв AYF53
Описание Connectors
Производители Panasonic
логотип Panasonic логотип 

5 Pages
scroll

No Preview Available !

AYF53 Даташит, Описание, Даташиты
AYF53
For FPC/FFC*
FPC connectors
(0.5mm pitch)
Back lock
Y5B/Y5BW
Series
New
Y5B
Low profile and space saving body of 1.0
mm high and 3.20 mm deep (3.70 mm
including the lever)
Y5B and Y5BW can have a minimum of
four and two contacts respectively,
contributing to the miniaturization and
thickness reduction of target equipment.
Applicable FPC shapes
Structure to lock
through-holes and
notches on both ends
of the FPC with
holding contacts
Y5BW
Compliance with RoHS Directive
FEATURES
• Low profile, space saving back lock
type with improved lever operability
• Mechanical design freedom achieved
by top and bottom double contacts
• Wide selection, including a type with
a small number of contacts
1.00
3.20
Unit: mm
4 contacts (Y5B: minimum)
• Wiring patterns can be located
underneath the connector.
• Man-hours for assembly can be
reduced by delivering the connectors
with their levers opened.
• Y5BW features advanced
functionality, including a structure to
temporarily hold the FPC and a higher
holding force.
The FPC holding contacts located on
both ends of the connector facilitate
positioning of FPC and further enhance
the FPC holding force.
www.DataSheet.co.kr
ORDERING INFORMATION
AYF 5 3
53: FPC Connector 0.5 mm pitch
(Back lock)
Number of contacts (2 digits)
Function
3: Top and bottom double contacts (Y5B)
6: Top and bottom double contacts, lock holding type (Y5BW)
Surface treatment (Contact portion / Terminal portion)
5: Au plating/Au flash plating (Ni barrier)
5
With notches With through-holes
(1) The holding contacts lock the FPC by its through-holes or
notches, allowing users to confirm the completion of the
FPC insertion operation.
(2) The inserted FPC can be temporarily held until the lever is
closed.
(3) When the lever is closed, the holding contacts lock the
FPC by its through-holes and notches, enhancing the FPC
holding force.
* (Y5BW is compatible with FPC only.)
APPLICATIONS
A wide range of digital equipment,
including mobile phones, PCs, DSCs,
and DVCs. Ideal for their touch panels
and LCD backlights, which require
connectors with a small number of
contacts.
PRODUCT TYPES
Height
Y5B
Number of contacts
Part number
Y5BW
Number of contacts
Part number
4 AYF530435 2 AYF530265
5 AYF530535 3 AYF530365
6 AYF530635 4 AYF530465
8 AYF530835 6 AYF530665
10 AYF531035 8 AYF530865
1.0 mm
12 AYF531235 10 AYF531065
14 AYF531435 12 AYF531265
16 AYF531635 14 AYF531465
24 AYF532435 22 AYF532265
28 AYF532835 26 AYF532665
50 AYF535035 48 AYF534865
Notes: 1. Order unit;
For mass production: in 1-inner carton (1-reel) units
Samples for mounting check: in 50-connector units. Please contact our sales office.
2. Please contact are sales office for connectors having a number of contacts other than those listed above.
Packing
Inner carton (1-reel)
Outer carton
5,000 pieces
10,000 pieces
panasonic-electric-works.net/ac
Datasheet pdf - http://www.DataSheet4U.net/









No Preview Available !

AYF53 Даташит, Описание, Даташиты
SPECIFICATIONS
1. Characteristics
Electrical
characteristics
Item
Rated current
Rated voltage
Insulation resistance
Breakdown voltage
Contact resistance
FPC holding force
Mechanical
characteristics
Contact holding force
Soldering terminal holding
force
Ambient temperature
Storage temperature
Thermal shock resistance
(with FPC inserted)
Environmental
characteristics
Humidity resistance
(with FPC inserted)
Saltwater spray resistance
(with FPC inserted)
H2S resistance
(with FPC inserted)
Soldering heat resistance
Lifetime
characteristics
Unit weight
Insertion and removal life
2. Material and surface treatment
Part name
Molded portion
Contact
Holding contact portion
Soldering terminal portion
AYF53
Specifications
0.5A/contact
50V AC/DC
Min. 1,000M(initial)
250V AC for 1 min.
Max. 80m
Y5B: Min. 0.2N/contacts × contacts (initial)
Y5BW: Min. 0.2N/contacts × contacts + 2.0N (initial)
Min. 0.2N/contacts
Min. 0.2N/contacts
–55°C to +85°C
–55°C to +85°C (product only)
–40°C to +50°C (emboss packing)
5 cycles,
insulation resistance min. 100M,
contact resistance max. 100m
120 hours,
insulation resistance min. 100M,
contact resistance max. 100m
24 hours,
insulation resistance min. 100M,
contact resistance max. 100m
48 hours,
contact resistance max. 100m
Peak temperature: 260°C or less
300°C within 5 sec. 350°C within 3 sec.
20 times
Conditions
Using 250V DC megger (applied for 1 min.)
No short-circuiting or damage at a detection current of 1 mA
when the specified voltage is applied for one minute.
Based on the contact resistance measurement method
specified by JIS C 5402.
Measurement of the maximum force applied until the
inserted compatible FPC is pulled out in the insertion axis
direction while the connector lever is closed
Y5B: Measuring the maximum force. As the contact is axially
pull out.
Y5BW: Measuring the maximum force. As the contact and
holding terminal are axially pull out.
Measuring the maximum force.
As the soldering terminal is axially pull out.
No freezing at low temperatures. No dew condensation.
Sequence
1.
–55
0
3
°C,
30
minutes
2. ~ , Max. 5 minutes
3.
85
+3
0
°C,
30
minutes
4. ~ , Max. 5 minutes
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Bath temperature 35±2°C,
saltwater concentration 5±1%
Bath temperature 40±2°C, gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Reflow soldering
Soldering iron
Repeated insertion and removal: min. 10 sec./time
Y5B (50 contacts): 0.16 g
www.DataSheet.co.kr
Material
Housing: LCP resin (UL94V-0)
Lever: LCP resin (UL94V-0)
Copper alloy
Copper alloy
Copper alloy
Surface treatment
Contact portion; Base: Ni plating, Surface: Au plating
Terminal portion; Base: Ni plating, Surface: Au plating
Terminal portion; Base: Ni plating, Surface: Au plating
Base: Ni plating, Surface: Au plating
DIMENSIONS (Unit: mm)
Y5B
0.50±0.10
A
(0.15)
B±0.20
(0.15)
C±0.20
Terminal coplanarity
0.1 0.30
(Contact and
0.50
soldering terminal)
(3.70)
1.60
(Suction
area)
2.90
3.20
(1.50)
(FPC
insertion
depth)
Number of contacts/
dimension
4
5
6
8
10
12
14
16
24
28
50
A
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
14.00
16.00
27.00
B
3.36
3.86
4.36
5.36
6.36
7.36
8.36
9.36
13.36
15.36
26.36
C
1.50
2.00
2.50
3.50
4.50
5.50
6.50
7.50
11.50
13.50
24.50
panasonic-electric-works.net/ac
Datasheet pdf - http://www.DataSheet4U.net/









No Preview Available !

AYF53 Даташит, Описание, Даташиты
AYF53
Y5B RECOMMENDED FPC/FFC DIMENSIONS
The conductive parts should be based by Ni plating and then Au plating.
(A+1)±0.05
A±0.03
0.50±0.07
0.50±0.03
(FPC) 0.35±0.03
(FFC) 0.30±0.03
R0.20 0.30±0.03
Y5BW
A
0.50±0.10
Number of contacts/
dimension
4
5
6
8
10
12
14
16
24
28
50
A
1.50
2.00
2.50
3.50
4.50
5.50
6.50
7.50
11.50
13.50
24.50
(0.15)
B±0.20
(0.15)
(0.15)
D±0.20
C±0.20
3.70
1.60
(Suction
area)
Terminal coplanarity
0.1
(Contact, holding
contact and
soldering terminal)
(0.30)
(0.50)
2.90
3.20
(1.50)
(FPC
insertion
depth)
www.DataSheet.co.kr
Number of contacts/
dimension
2
3
4
6
8
10
12
14
22
26
48
A
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
14.00
16.00
27.00
B
3.36
3.86
4.36
5.36
6.36
7.36
8.36
9.36
13.36
15.36
26.36
C
1.50
2.00
2.50
3.50
4.50
5.50
6.50
7.50
11.50
13.50
24.50
D
0.50
1.00
1.50
2.50
3.50
4.50
5.50
6.50
10.50
12.50
23.50
Y5BW RECOMMENDED FPC DIMENSIONS
The conductive parts should be based by Ni plating and then Au plating.
1.00±0.07
Notches type
(A+2)±0.05
A±0.03
0.50±0.03 (Pitch) 0.35±0.03
0.70+–00..0035
R0.20
0.30±0.03
1.00+–00..0076
Through-holes type
(A+2)±0.05
A±0.03
0.50±0.03 (Pitch) 0.35±0.03
R0.20R0.20
Must not
reach the
conductor
0.45+–00..0035
R0.20
0.30±0.03
0.50+–00..0035 dia.
(Through-hole)
Must not
reach the
conductor
Number of contacts/
dimension
2
3
4
6
8
10
12
14
22
26
48
A
0.50
1.00
1.50
2.50
3.50
4.50
5.50
6.50
10.50
12.50
23.50
EMBOSSED TAPE DIMENSIONS (Unit: mm) (Common for respective contact type)
• Specifications for taping
• Specifications for the plastic reel
Tape I
A: Max. 24 mm
(A±0.3)
(B) (1.75)
Tape II
A: 44 mm
(A±0.3)
(C)
(B)
(1.75)
(In accordance with EIAJ ET-7200B.)
(D±1)
Taping reel
Top cover tape
Embossed carrier tape
1.50 +00.0.1dia.
Label
Embossed mounting-hole
panasonic-electric-works.net/ac
Datasheet pdf - http://www.DataSheet4U.net/










Скачать PDF:

[ AYF53.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
AYF53ConnectorsPanasonic
Panasonic

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск