DataSheet26.com

STK672-740A-E PDF даташит

Спецификация STK672-740A-E изготовлена ​​​​«Sanyo Semicon Device» и имеет функцию, называемую «2-phase Stepping Motor Driver».

Детали детали

Номер произв STK672-740A-E
Описание 2-phase Stepping Motor Driver
Производители Sanyo Semicon Device
логотип Sanyo Semicon Device логотип 

19 Pages
scroll

No Preview Available !

STK672-740A-E Даташит, Описание, Даташиты
www.DataSheet.co.kr
Ordering number : ENA1136B
STK672-740A-E
Thick-Film Hybrid IC
2-phase Stepping Motor Driver
Overview
The STK672-740A-E is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control.
Applications
Office photocopiers, printers, etc.
Features
Built-in overcurrent detection function (output current OFF).
Built-in overheat detection function (output current OFF).
If either overcurrent or overheat detection function is activated, the FAULT signal (active low) is output.
Built-in power on reset function.
Phase signal input driver activated with an active Low and incorporates a simultaneous ON prevention function.
Supports schmitt input for 2.5V high level input.
Incorporating a current detection resistor (0.089Ω: resistor tolerance ±2%), motor current can be set using two
external resistors.
Provides the output current cutoff ENABLE pin.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
70611HKPC 018-10-0049/21611HKIM/71608HKIM No. A1136-1/19
Datasheet pdf - http://www.DataSheet4U.net/









No Preview Available !

STK672-740A-E Даташит, Описание, Даташиты
www.DataSheet.co.kr
STK672-740A-E
Specifications
Absolute Maximum Ratings at Tc = 25°C
Parameter
Maximum supply voltage 1
Maximum supply voltage 2
Input voltage
Output current 1
Output current 2
Output current 3
Allowable power dissipation 1
Allowable power dissipation 2
Operating substrate temperature
Junction temperature
Storage temperature
Symbol
VCC max
VDD max
VIN max
IOP max
IOH max
IOF max
PdMF max
PdPK max
Tc max
Tj max
Tstg
Conditions
No signal
No signal
Logic input pins
10μs, 1 pulse (resistance load)
VDD=5V, CLOCK200Hz
Pin16 output current
With an arbitrarily large heat sink. Per MOSFET
No heat sink
Ratings
52
-0.3 to +6.0
-0.3 to +6.0
20
4
10
8.3
3.1
105
150
-40 to +125
unit
V
V
V
A
A
mA
W
W
°C
°C
°C
Allowable Operating Ranges at Ta=25°C
Parameter
Symbol
Conditions
Ratings
Operating supply voltage 1
VCC
With signals applied
10 to 42
Operating supply voltage 2
VDD
With signals applied
5±5%
Input high voltage
Input low voltage
Output current 1
VIH
VIL
IOH1
Pins 13, 17, 12, 10, 14, 15
Pins 13, 17, 12, 10, 14, 15
Tc=105°C, CLOCK200Hz,
Continuous operation, duty=100%
2.5 to VDD
0 to 0.8
3.0
Output current 2
IOH2
Tc=80°C, CLOCK200Hz,
Continuous operation, duty=100%,
See the motor current (IOH) derating curve
3.3
Phase driver withstand voltage
VDSS
ID=1mA (Tc=25°C)
100min
Recommended operating
substrate temperature
Tc No condensation
0 to 105
Recommended Vref range
Vref Tc=105°C
0.14 to 1.31
Refer to the graph for each conduction-period tolerance range for the output current and brake current.
unit
V
V
V
V
A
A
V
°C
V
Electrical Characteristics at Tc=25°C, VCC=24V, VDD=5.0V
Parameter
Symbol
Conditions
min typ
VDD supply current
ICCO
Pin 9 current CLOCK=GND
4.4
Output average current
Ioave
R/L=1Ω/0.62mH in each phase
0.519
0.625
FET diode forward voltage
Vdf If=1A (RL=23Ω)
0.83
Output saturation voltage
Vsat
RL=23Ω
0.20
Input high voltage
VIH Pins 13, 17, 12, 10, 14, 15
2.5
Input low voltage
VIL Pins 13, 17, 12, 10, 14, 15
FAULT low output voltage
VOLF
Pin 16 (IO=5mA)
0.25
5V level FAULT leakage current
IILF Pin 16=5V
5V level input current
IILH Pins 13, 17, 12, 10, 14, 15=5V
50
GND level input current
IILL Pins 13, 17, 12, 10, 14, 15=GND
Vref input bias current
IIB Pin 19=1.0V
10
PWM frequency
fc
29 45
Overheat detection temperature
TSD
Design guarantee
144
*Ioave values are for when the lead frame of the product is soldered to the mounting substrate.
Notes: A fixed-voltage power supply must be used.
max
8
0.731
1.5
0.33
0.8
0.5
10
75
10
15
61
unit
mA
A
V
V
V
V
V
μA
μA
μA
μA
kHz
°C
No. A1136-2/19
Datasheet pdf - http://www.DataSheet4U.net/









No Preview Available !

STK672-740A-E Даташит, Описание, Даташиты
www.DataSheet.co.kr
Package Dimensions
unit:mm (typ)
29.2
25.6
(20.47)
STK672-740A-E
4.5
2.0
(R1.7)
1 19
1.0
(5.6) 18 1.0=18.0
0.52
4.2
0.4
8.2
(20.4)
Derating curve of motor current, IOH, vs. STK672-740A-E Operating substrate temperature, Tc
IOH - Tc
4.5
200Hz 2 phase excitation
4.0
3.5 Hold mode
3.0
2.5
2.0
1.5
1.0
0.5
0
0 10 20 30 40 50 60 70 80 90 100 110
Operating Substrate Temperature, Tc- °C
ITF02588
Notes
The current range given above represents conditions when output voltage is not in the avalanche state.
If the output voltage is in the avalanche state, see the allowable avalanche energy for STK672-7** series hybrid ICs given
in a separate document.
The operating substrate temperature, Tc, given above is measured while the motor is operating.
Because Tc varies depending on the ambient temperature, Ta, the value of IOH, and the continuous or intermittent
operation of IOH, always verify this value using an actual set.
The Tc temperature should be checked in the center of the metal surface of the product package.
No. A1136-3/19
Datasheet pdf - http://www.DataSheet4U.net/










Скачать PDF:

[ STK672-740A-E.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
STK672-740A-E2-phase Stepping Motor DriverSanyo Semicon Device
Sanyo Semicon Device
STK672-740A-ETwo-Phase Stepping Motor DriverON Semiconductor
ON Semiconductor

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск