|
|
Número de pieza | ABB0204 | |
Descripción | Low Skew Output Buffer | |
Fabricantes | Abracon Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ABB0204 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! ABB0204
Low Skew Outpwwuwt.DBatuaSfhfeeet4rU.com
FEATURES
PIN CONFIGURATION
• Frequency range 50 ~ 120MHz.
• Internal phase locked loop will allow spread spec-
trum modulation on reference clock to pass to the
outputs (up to 100kHz SST modulation).
• Zero input - output delay.
• Less than 700 ps device - device skew.
• Less than 250 ps skew between outputs.
• Less than 200 ps cycle - cycle jitter.
• Output Enable function tri-state outputs.
• 3.3V operation.
• Available in 8-Pin 150mil SOIC.
DESCRIPTION
The ABB0204 is a high performance, low skew, low
jitter zero delay buffer designed to distribute high
speed clocks and is available in 8-pin SOIC package. It
has four outputs that are synchronized with the input.
The synchronization is established via CLKOUT feed
back to the input of the PLL. Since the skew between
the input and output is less than ±350 ps, the device
acts as a zero delay buffer.
REF
CLK2
CLK1
GND
1
2
3
4
8 CLKOUT
7 CLK4
6 VDD
5 CLK3
Remark
If REF clock is stopped for more than 10us after it has already been
provided to the chip, and after power-up, the output clocks will
disappear. In that instance, a full power-up reset is required in order
to reactivate the output clocks.
BLOCK DIAGRAM
REF
PLL
CLKOUT
CLK1
CLK2
CLK3
CLK4
30332 Esperanza., Rancho Santa Margarita, Ca 92688 Ph: 949-546-8000 Fax: 949-546-8001 www.Abracon.com 03/21/05 Page 1
1 page ABB0204
Low Skew Outwpwuw.tDaBtaSuhfeefte4Ur.com
Output-Output Skew
The skew between CLKOUT and the CLK(1-4) outputs is not dynamically adjusted by the
PLL. Since CLKOUT is one of the inputs to the PLL, zero phase difference is maintained
from REF to CLKOUT. If all outputs are equally loaded, zero phase difference will
maintained from REF to all outputs.
If applications requiring zero output-output skew, all the outputs must equally loaded.
If the CLK(1-4) outputs are less loaded than CLKOUT, CLK(1-4) outputs will lead it; if the
CLK(0-4) is more loaded than CLKOUT, CLK(1-4) will lag the CLKOUT.
Since the CLKOUT and the CLK(1-4) outputs are identical, they all start at the same time,
but difference loads cause them to have different rise times and different times crossing
the measurement thresholds.
REF
CLKOUT
CLK(1-4)
Zero Delay
REF input and all outputs loaded equally
REF
CLKOUT
CLK(1-4)
Advanced
REF input and CLK(1-4) outputs loaded equally,
with CLK(1-4) less loaded than CLKOUT.
REF
CLKOUT
CLK(1-4)
Delayed
REF input and CLK(1-4) outputs loaded equally, with
CLK(1-4) more loaded than CLKOUT.
30332 Esperanza., Rancho Santa Margarita, Ca 92688 Ph: 949-546-8000 Fax: 949-546-8001 www.Abracon.com Rev 03/21/05 Page 5
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet ABB0204.PDF ] |
Número de pieza | Descripción | Fabricantes |
ABB0203 | Low Skew Output Buffer | Abracon Corporation |
ABB0204 | Low Skew Output Buffer | Abracon Corporation |
ABB0205 | Low Skew Output Buffer | Abracon Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |