|
|
PDF E11C1 Data sheet ( Hoja de datos )
| Número de pieza | E11C1 | |
| Descripción | OSCILLATOR | |
| Fabricantes | ECLIPTEK | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de E11C1 (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Marketing Bulletin
DATE: May 20, 2003
TO: Affected Customers
FROM: Mark Stoner
RE: Product Termination
To all concerned parties,
This bulletin is to notify all customers of the termination of the following Ecliptek series
effective May 14th, 2003:
Series
E11C1
E13C1
E11C2
E13C2
E31C2
E32C2
Description
Four Pad SMD PECL Oscillator, 5V
Four Pad SMD PECL Oscillator, 3.3V
Six Pad SMD PECL Oscillator, 5V
Six Pad SMD PECL Oscillator, 3.3V
Six Pad SMD PECL VCXO, 5V
Six Pad SMD PECL VCXO, 3.3V
Recommended Replacement
E11J1 or E11W1
E13J1 or E13W1
E11J2 or E11W2
E13J2 or E13W2
E31J2 or E31W2
E32J2 or E32W2
Because of the circumstances surrounding this termination, there will be no end-of-life
policy exercised. The series will be terminated with no purchasing or lifetime buy
window available. All of us at Ecliptek Corporation apologize for any inconvenience this
may have caused and can assure you we are taking measures to insure this will not
happen again in the future.
Best Regards,
Mark W. Stoner
Director of Marketing
Ecliptek Corporation
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
1 page  
PART NUMBERING GUIDE
www.DataSheet4U.com
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
C=±100ppm Maximum over 0°C to +70°C
D=±50ppm Maximum over 0°C to +70°C
E=±25ppm Maximum over 0°C to +70°C
F=±20ppm Maximum over 0°C to +70°C
G=±100ppm Maximum over -40°C to +85°C
H=±50ppm Maximum over -40°C to +85°C
DUTY CYCLE
1=50% ±10%, 2=50% ±5%
E11C2 F 2 C - 155.520M TR
AVAILABLE OPTIONS
Blank=Tubes
TR=Tape and Reel (Standard)
FREQUENCY
LOGIC CONTROL/ADDITIONAL OUTPUT
A=No Connect
B=Enable/Disable
D=Complementary Output and Enable/Disable
E=Complementary Output (Alt. Pin Configuration)
C=Complementary Output G=Complementary Output and Enable/Disable
(Alt. Pin Configuration)
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
PIN CONNECTIONS TABLE
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TAPE
F
12 ±.1
A
24 ±.3
G
B0*
BC
11.5 ±.1 10.75 ±.1
HJ
1.5 +.1-0 A0*
D
4 ±.2
K
.4 ±.05
EF
2±.1
L
K0*
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
REEL
R
2.5 MIN
M
1.5 MIN
S
10 MIN
NOPQ
50 MIN 20.2 MIN 13±.2 40 MIN
T U V QTY/REEL
30.4 MAX 360 MAX 24.4+2-0 1000
*Compliant to EIA 481A
MARKING SPECIFICATIONS
Characteristic
Specification
Seal Integrity
Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds
OBSOLETESolderability
minimum (internal crystal only).
Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage.
Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times.
Shock
Random drop on hard wooden plate 3 times from a height
of 20cm.
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
Line 1: ECLIPTEK
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E11C2
PACKAGE
CERAMIC
VOLTAGE
5.0V
CLASS
OS66
REV.DATE
10/02
800-ECLIPTEK www.ecliptek.com for latest revision 155 Specifications subject to change without notice.
5 Page 
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
D=±50ppm Maximum over 0°C to +70°C
E=±25ppm Maximum over 0°C to +70°C
F=±20ppm Maximum over 0°C to +70°C
H=±50ppm Maximum over -40°C to +85°C
APR
3=±50ppm Minimum
LINEARITY
A=20%
B=15%
C=10%
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
PART NUMBERING GUIDE
E31C2 F 3 A 2 C - 77.760M TR
www.DataSheet4U.com
AVAILABLE OPTIONS
Blank=Tubes
TR = Tape and Reel (Standard)
FREQUENCY
ADDITIONAL OUTPUT/LOGIC CONTROL
A=No Connect and Single Output
B=Enable/Disable and Single Output
C=No Connect and Complementary Output
D=Enable/Disable and Complementary Output
DUTY CYCLE
1=50 ±10(%), 2=50 ±5(%)
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Voltage Control
Pin 2: Enable/Disable or No Connect
Pin 3: Case Ground
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Pin 4: Output
Pin 5: Complementary Output or No Connect
Pin 6: Supply Voltage
Tolerances = ±0.1
TAPE
F
12 ±.1
A
24 ±.3
G
B0*
BC
11.5 ±.1 10.75 ±.1
HJ
1.5 +.1-0 A0*
D
4 ±.2
K
.4 ±.05
EF
2±.1
L
K0*
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
REEL
R
2.5 MIN
M
1.5 MIN
S
10 MIN
NOPQ
50 MIN 20.2 MIN 13±.2 40 MIN
T U V QTY/REEL
30.4 MAX 360 MAX 24.4+2-0 1000
*Compliant to EIA 481A
MARKING SPECIFICATIONS
Characteristic
Specification
Seal Integrity
Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds
minimum (internal crystal only).
Solderability
OBSOLETEMarking Permanency
Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage.
10 Strokes with brush after 1 minute soak in solvent, 3 times.
Shock
Random drop on hard wooden plate 3 times from a height
of 20cm.
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
Line 1: ECLIPTEK
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E31C2
PACKAGE
CERAMIC
VOLTAGE
5.0V
CLASS
OS68
REV.DATE
10/02
800-ECLIPTEK www.ecliptek.com for latest revision 189 Specifications subject to change without notice.
11 Page | ||
| Páginas | Total 13 Páginas | |
| PDF Descargar | [ Datasheet E11C1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| E11C1 | OSCILLATOR | ECLIPTEK |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |