DataSheet26.com

BVU-3R16BA4 PDF даташит

Спецификация BVU-3R16BA4 изготовлена ​​​​«Bright View Electronic» и имеет функцию, называемую «ULTRA BRIGHTNESS LED LAMP».

Детали детали

Номер произв BVU-3R16BA4
Описание ULTRA BRIGHTNESS LED LAMP
Производители Bright View Electronic
логотип Bright View Electronic логотип 

5 Pages
scroll

No Preview Available !

BVU-3R16BA4 Даташит, Описание, Даташиты
BRIGHT VIEW
ELECTRONICS CO.,LTD
BVU-3R16BA4
ULTRA BRIGHTNESS LED LAMP
www.DataSheet4U.com
PACKAGE CONFIGURATION
DESCRIPTION
Dice Material : GaN Blue
Light Color : Blue Color
Lens Color : Water Transparent
Stand-Off P/N : BVU-3R16BA4 R
RADIATION PATTERN
-30° 0°
30°
3.2
3.5
1.0
3.2
3.2
3.0
1.0Max.
9.8±0.5
25.4Min.
1.3
1.0
25.4Min.
-60° 60°
CATHODE
CATHODE
0.5
100 75 50 25 0 25 50 75 100
Relative Luminous Intensity ( Iv % )
2.54 1.0Min.
2.54
Tolerance ± 0.25
ABSOLUTE MAXIMUM RATINGS AT Ta = 25
PARAMETER
MAX.
UNIT
Power Dissipation (PD)
120 mW
Continuous Forward Current (IF)
30 mA
Peak Forward Current ( 1/10 Duty Cycle , 0.1ms Pulse Width ) (IFP)
160
mA
Reverse Voltage (VR)
5V
Derating Linear From 25
0.4 mA/oC
Operating Temperature Range (Topr)
30 to 80
Storage Temperature Range (Tstg)
40 to 100
Lead Solder Temperature 1.6 mm Below Package 260 for 5 seconds (Tsld)
ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta = 25
SYMBOL
PARAMETER
TEST COND.
MIN.
V F Forward Voltage
I F = 20 mA
I R Reverse Current
V R = 5V
λp Peak Emission Wavelength I F = 20 mA
λd Dominant Wavelength
I F = 20 mA
2θ1/2 Viewing Angle
I F = 20 mA
I V Luminous Intensity
I F = 20 mA
1300
TYP.
3.2
465
470
40
1680
MAX.
4.0
10
UNIT
V
μA
nm
nm
Deg
mcd
BIN GRADE LIMITS (IF=20 mA)
LUMINOUS INTENSITY / mcd
Bin
KL
M
Min. 1300 1680 2180
N
2800
BIN GRADE LIMITS (IF=20 mA)
DOMINANT WAVELENGTH / nm
Bin BM BN BO
Min. 460 465
470
Max.
1680 2180 2800 3600
Max. 465 470
475
Tolerance ± 15%mcd
*Bright View reserves the rights to alter specifications and remove availability of products at any time without notice.
*Dominant Wavelength, λd is according to CIE Chromaticity Diagram base on color of lamps.
*θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity.
*These products are sensitive to static electricity. Caution must be taken strictly to avoid static electricity.
2009/2/19 – B









No Preview Available !

BVU-3R16BA4 Даташит, Описание, Даташиты
BRIGHT VIEW
ELECTRONICS CO.,LTD
BVU-3R16BA4
ULTRA BRIGHTNESS LED LAMP
www.DataSheet4U.com
TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES
FIG. 1 Forward Current vs. Forward Voltage
( Ta = 25 °C )
40
35
30
25
20
15
10
5
0 2.2 2.7 3.2 3.7 4.2
Forward Voltage Vf ( V )
FIG. 2 Relative Intensity vs. Forward Current
( Ta = 25 °C )
3.0
2.5
2.0
1.5
1.0
0.5
0
0 10 20 30 40
Forward Current If ( mA )
FIG. 3 Forward Voltage vs. Temperature
1.2
1.1
1.0
0.9
0.8
-50
-25 0 25 50 75 100 125
Ambient Temperature Ta ( °C )
FIG. 5 Relative Intensity vs. Wavelength ( λp )
( Ta = 25 °C )
1.0
0.5
0
400 450 500 550
Wavelength ( nm )
FIG. 4 Relative Intensity vs. Temperature
3.0
2.5
2.0
1.5
1.0
0.5
0
-50 -25 0 25 50 75 100 125
Ambient Temperature Ta ( °C )
FIG. 6 Maximum Forward Current
vs. Temperature
40
30
20
10
0
0 20 40 60 80 100 120
Ambient Temperature Ta ( °C )
2009/2/19 – B









No Preview Available !

BVU-3R16BA4 Даташит, Описание, Даташиты
BRIGHT VIEW
ELECTRONICS CO.,LTD
BVU-3R16BA4
ULTRA BRIGHTNESS LED LAMP
www.DataSheet4U.com
CAUTION FOR CLASS 1 ESD ( MACHINE MODE )
Gallium Nitride (GaN) based light emitting diodes (LEDs) are extremely sensitive to electrostatic
discharge (ESD). Users are strongly recommended to take necessary meter to test the static
and avoid ESD when handing these products.
Bright View's BA, GN, WI series products are GaN based materials and are classified as
"Class 1",( ESD endurance 50V or lower ), any manufacturing site or workstation where
GaN devices are handled should be rated and controlled at 50V or below.
Proper grounding of products or machines ( via 1M), using static dissipative mats, static
dissipative containers, static dissipative working uniferms and shoes are considered to be
effective against ESD.
An ionizer is recommended in the facility or environment where ESD may be generated
easily, and soldering iron with a grounded tip is also recommended.
To install a protection device in the LED circuit to ensure the surge current and voltage not
exceeding the max rating during on/off swithing.
When inspecting the final products in which LEDs are assembled, it is recommended to
check whether the assembled LEDs are damaged by ESD or not. It is simple to find
damaged LEDs by light-on or a VF test at lower current (below 1mA is recommended).
ESD damaged LEDs will show some unusual characteristics such as the remarkable
increasing of leak current, the forward voltage become lower, or the LEDs do not light on
at the low current.
2009/2/19 – B










Скачать PDF:

[ BVU-3R16BA4.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
BVU-3R16BA4ULTRA BRIGHTNESS LED LAMPBright View Electronic
Bright View Electronic

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск