|
|
Datasheet 856327 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | 856327 | 915 MHz SAW Filter Preliminary Data Sheet
Features
• • • • • • • • For ISM band applications Usable bandwidth 26 MHz Low loss High attenuation No impedance matching required for operation at 50 Ω Single-ended operation Chip Scale Package (CSP) Small size
Part Number 856327 915 MH | TriQuint Semiconductor | filter |
856 Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | 8560GP | LUCL8560GP Data Sheet April 2000
L8560 Low-Power SLIC with Ringing
Features
s s
Description
The L8560 full-feature, low-power subscriber line interface circuit (SLIC) is optimized for low power consumption while providing an extensive set of features. This part is ideal for ISDN terminal Agere Systems data | | |
2 | 8561 | POWER FACTOR CORRECTOR UNISONIC TECHNOLOGIES CO., LTD 8561
Preliminary
CMOS IC
POWER FACTOR CORRECTOR
DESCRIPTION
The UTC 8561 is a Power Factor Corrector, which can work in wide input voltage range applications (from 85V ~ 265V) with an excellent THD. It has very low start up current (about 50 uA) and a disable func Unisonic Technologies data | | |
3 | 856326 | 1575.42 MHz SAW Filter Preliminary Data Sheet
Features
• • • • • • • • For GPS applications Usable bandwidth 2 MHz 0.53 dB typical insertion loss No impedance matching required for operation at 50 Ω Single-ended operation Chip Scale Package (CSP) Ceramic surface mount package Hermetic
Part Number 856326 TriQuint Semiconductor filter | | |
4 | 856327 | 915 MHz SAW Filter Preliminary Data Sheet
Features
• • • • • • • • For ISM band applications Usable bandwidth 26 MHz Low loss High attenuation No impedance matching required for operation at 50 Ω Single-ended operation Chip Scale Package (CSP) Small size
Part Number 856327 915 MH TriQuint Semiconductor filter | | |
5 | 856331 | SAW Duplexer
Data Sheet
Features
• • • • • • • • • • For AMPS, CDMA and TDMA applications Usable bandwidth 25 MHz (each band) High Tx-Rx isolation Low insertion loss High attenuation Single-ended operation No matching required for operation at 50Ω Ceramic Surface Mount Sawtek data | | |
6 | 856575 | SAW Filter Preliminary Data Sheet
Features
• • • • • • • • • For DCS applications Usable bandwidth of 75 MHz Compatible with leading chipset suppliers Low loss Single-ended input, 50Ω Balanced output, 150Ω Ceramic Chip Scale Package (CSP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb
TriQuint Semiconductor filter | | |
7 | 856731 | IF SAW Filter 856731
192 MHz SAW Filter Applications
General Purpose Wireless Wireless Infrastructure 3G, 4G, Multistandard
Functional Block Diagram SE/Bal
Top view
Gnd Gnd Gnd 9 Input Gnd Gnd 10 11 12 1 2 3 8 7 6 5 4 Output Gnd Output +
Functional Block Diagram SE/SE
Top view
Gnd Gnd Gnd 9 Input Gnd Gnd 10 11 TriQuint Semiconductor filter | |
Esta página es del resultado de búsqueda del 856327. Si pulsa el resultado de búsqueda de 856327 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |