|
|
PDF LIS3L06AL Data sheet ( Hoja de datos )
| Número de pieza | LIS3L06AL | |
| Descripción | MEMS INERTIAL SENSOR | |
| Fabricantes | STMicroelectronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LIS3L06AL (archivo pdf) en la parte inferior de esta página. Total 17 Páginas | ||
|
No Preview Available !
LIS3L06AL
MEMS INERTIAL SENSOR:
3-axiswww.datasheet4u.com - +/-2g/6g ULTRACOMPACT LINEAR ACCELEROMETER
Features
■ 2.4V TO 3.6V SINGLE SUPPLY OPERATION
■ LOW POWER CONSUMPTION
■ ±2g/±6g USER SELECTABLE FULL-SCALE
■ 0.5mg RESOLUTION OVER 100Hz
BANDWIDTH
■ EMBEDDED SELF TEST
■ OUTPUT VOLTAGE, OFFSET AND
SENSITIVITY RATIOMETRIC TO THE
SUPPLY VOLTAGE
■ HIGH SHOCK SURVIVABILITY
■ ECO-PACK COMPLIANT
Description
The LIS3L06AL is a low-power 3-axis linear
capacitive accelerometer that includes a sensing
element and an IC interface able to take the
information from the sensing element and to
provide an analog signal to the external world.
The sensing element, capable of detecting the
acceleration, is manufactured using a dedicated
process developed by ST to produce inertial
sensors and actuators in silicon.
The IC interface is manufactured using a standard
CMOS process that allows high level of integration
Order codes
Part number
LIS3L06AL
LIS3L06ALTR
Temp range, °C
-40°C to +85°C
-40°C to +85°C
LGA-8
to design a dedicated circuit which is trimmed to
better match the sensing element characteristics.
The LIS3L06AL has a dynamically selectable full
scale of ±2g/±6g and it is capable of measuring
accelerations over a bandwidth of 1.5 kHz for all
axes. The device bandwidth may be reduced by
using external capacitances. A self-test capability
allows to check the mechanical and electrical
signal path of the sensor.
The LIS3L06AL is available in plastic SMD
package and it is guaranteed to operate over an
extended temperature range of -40°C to +85°C.
The LIS3L06AL belongs to a family of products
suitable for a variety of applications:
– Mobile terminals
– Gaming and Virtual Reality input devices
– Free-fall detection for data protection
– Antitheft systems and Inertial Navigation
– Appliance and Robotics.
Package
LGA-8
LGA-8
Packing
Tray
Tape & Reel
September 2005
CD00068498
Rev 1
1/17
www.st.com
17
1 page  
LIS3L06AL
2 Mechanical and Electrical Specifications
2 Mechanical and Electrical Specifications
www.datas2he.e1t4u.comMechanical Characteristics.
Table 2.
Mechanical Characteristics1
(Temperature range -40°C to +85°C) All the parameters are specified @ Vdd =3.3V,
T = 25°C unless otherwise noted
Symbol
Parameter
Test Condition
Min.
Typ.2
Max.
Unit
Ar Acceleration Range3
So Sensitivity4
Full-scale = 2g
Full-scale = 6g
Full-scale = 2g
Full-scale = 6g
±1.8
±5.4
Vdd/5–10%
Vdd/15–10%
±2.0
±6.0
Vdd/5
Vdd/15
Vdd/5+10%
Vdd/15+10%
g
g
V/g
V/g
SoDr
Sensitivity Change Vs
Temperature
Delta from +25°C
±0.01
%/°C
Voff
OffDr
NL
Zero-g Level4
Zero-g level Change Vs
Temperature
Non Linearity5
T = 25°C
Delta from +25°C
Best fit straight line
Full-scale = 2g
X, Y axis
Best fit straight line
Full-scale = 2g
Z axis
Vdd/2-6%
Vdd/2
±0.5
Vdd/2+6%
V
mg/°C
±0.3 ±1.5 %
±0.5 ±1.5 %
CrossAx Cross-Axis6
±2 ±4 %
An
Acceleration Noise
Density
Vdd=3.3V;
Full-scale = 2g
50 µg/ Hz
T = 25°C
Vdd=3.3V
Full-scale = 2g
X axis
T = 25°C
Self test Output Voltage Vdd=3.3V
Vt Change7,8,9
Full-scale = 2g
Y axis
-20
-50
-100
mV
20 50 100 mV
T = 25°C
Vdd=3.3V
Full-scale = 2g
Z axis
20 50 100 mV
Sensing Element
Fres Resonance Frequency9 all axes
1.5
kHz
CD00068498
5/17
5 Page 
LIS3L06AL
Table 5.
www.datasheet4u.com
Filter Capacitor Selection, Cload (x,y,z).
Cut-off frequency
1 Hz
10 Hz
20 Hz
50 Hz
100 Hz
200 Hz
500 Hz
4 Application hints
Capacitor value
1500 nF
150 nF
68 nF
30 nF
15 nF
6.8 nF
3 nF
4.1 Soldering information
The LGA-8 package is compliant with the ECOPACK,RoHs and “Green” standard.It is qualified
for soldering heat resistance according to JEDEC J-STD-020C.
Pin 1 indicator is electrically connected to ST pin. Leave pin 1 indicator unconnected during
soldering.
Land pattern and soldering recommendations are available upon request.
4.2 Output Response vs Orientation
Figure 4. Output response vs Orientation
X=1.65V(0g)
Y=0.99V (-1g)
Z=1.65V (0g)
X=0.99V (-1g)
Y=1.65V (0g)
Z=1.65V (0g)
TOP VIEW
Bottom
X=1.65V (0g)
Y=1.65V (0g)
Top Z=0.99V (-1g)
Top X=1.65V (0g)
Y=1.65V (0g)
Bottom Z=2.31V (+1g)
X=2.31V (+1g)
Y=1.65V (0g)
Z=1.65V (0g)
X=1.65V(0g)
Y=2.31V (+1g)
Z=1.65V (0g)
Earth’s Surface
Figure 4 refers to LIS3L06AL device powered at 3.3V.
CD00068498
11/17
11 Page | ||
| Páginas | Total 17 Páginas | |
| PDF Descargar | [ Datasheet LIS3L06AL.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LIS3L06AL | MEMS INERTIAL SENSOR | STMicroelectronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |