|
|
Número de pieza | LM2759 | |
Descripción | 1A Switched Capacitor Flash LED Driver | |
Fabricantes | National Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LM2759 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! November 20, 2008
LM2759 PRODUCT BRIEF
1A Switched Capacitor Flash LED Driver with I2C
Compatiblewww.datasheet4u.com Interface
General Description
LM2759 is an integrated low-noise, high-current switched ca-
pacitor DC/DC converter with a regulated current source. The
device requires only four small ceramic capacitors making the
total solution area less than 22 mm2 and the height less than
1 mm. The LM2759 is capable of driving loads up to 1A from
a single-cell Li-Ion battery. Maximum efficiency is achieved
over the input voltage range by actively selecting the proper
gain based on the LED forward voltage and current require-
ments.
The LED current can be programmed up to 1A via an I2C-
compatible interface, along with eight selectable Flash Time-
Out durations. One high-current Flash LED can be driven
either in a high-power Flash mode or a low-power Torch
mode. The Strobe pin allows the flash to be toggled via a
Flash enable signal from a camera module. The TX input pin
limits the Flash LED current to the Torch current level during
a RF PA pulse, to reduce high loads on the battery. Internal
soft-start circuitry limits the amount of inrush current during
start-up.
LM2759 is offered in a small 12-pin thermally enhanced LLP
package.
Notice: This document is not a full datasheet. For more
information regarding this product or to order samples,
please contact your National Semiconductor sales office
or visit http://www.national.com/support/dir.html.
Features
■ Up to 1A Output Current
■ Solution Area < 22 mm2
■ No Inductor Required
■ 90% Peak Efficiency
■ Adaptive 1x, 1.5x and 2x Gains for Maximum Efficiency
■ Load Disconnect in Shutdown
■ Accurate Input Current Control During Gain Transitions
■ Flash Time-Out
■ TX Input Pin Ensures Synchronization with RF Power
Amplifier Pulse
■ Torch, Flash, and Indicator Modes
■ External Flash Enable via Strobe Input Pin
■ Strobe Input Disable via I2C
■ Programmable Flash Pulse Duration, and Torch and Flash
Currents via I2C-Compatible Interface
■ 1MHz Constant Frequency Operation
■ Low Profile 12–Pin LLP (3mm x 3mm x 0.8mm)
Applications
■ Camera Flash in Cellular Phones
Typical Application Circuit
© 2008 National Semiconductor Corporation 300693
30069301
www.national.com
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet LM2759.PDF ] |
Número de pieza | Descripción | Fabricantes |
LM2750 | Low Noise/ 5.0V Regulated Switched Capacitor Voltage Converter | National Semiconductor |
LM2750 | LM2750 Low-Noise Switched-Capacitor Boost Regulator (Rev. M) | Texas Instruments |
LM2750LD-5.0 | Low Noise/ 5.0V Regulated Switched Capacitor Voltage Converter | National Semiconductor |
LM2750LDX-5.0 | Low Noise/ 5.0V Regulated Switched Capacitor Voltage Converter | National Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |