|
|
PDF S-1133 Data sheet ( Hoja de datos )
| Número de pieza | S-1133 | |
| Descripción | HIGH RIPPLE-REJECTION AND LOW DROPOUT MIDDLE-OUTPUT CURRENT CMOS VOLTAGE REGULATOR | |
| Fabricantes | Seiko Instruments | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de S-1133 (archivo pdf) en la parte inferior de esta página. Total 37 Páginas | ||
|
No Preview Available !
Rev.2.1_00
HIGH RIPPLE-REJECTION AND LOW DROPOUT MIDDLE-OUTPUT CURRENT
CMOS VOLTAGE REGULATOR
S-1133 Series
www.datasheet4u.com
The S-1133 Series is a positive voltage regulator with a low dropout
voltage, high output voltage accuracy, and low current consumption
(300 mA output current) developed based on CMOS technology.
A 1 µF small ceramic capacitor can be used*1. It operates with low
current consumption of 60 µA typ. The S-1133 Series includes an
overcurrent protection circuit that prevents the output current from
exceeding the current capacitance of the output transistor and a
thermal shutdown circuit that prevents damage due to overheating.
In addition to the types in which output voltage is set inside the IC,
a type for which output voltage can be set via an external resistor is
added to a lineup (S-1133x00 Series). SOT-89-5 and super-small
SNT-8A packages realize high-density mounting. This, in addition
to low current consumption, makes the S-1133 Series ideal for
mobile devices.
*1. A ceramic capacitor of 2.2 µF or more can be used for products
whose output voltage is 1.7 V or less.
Features
• Output voltage :
• Voltage setting via external resistor :
• Input voltage range :
• High-accuracy output voltage :
• Low dropout voltage :
• Low current consumption :
• Output current :
• Low ESR capacitor can be used :
• High ripple rejection :
• Built-in overcurrent protection circuit :
• Built-in thermal shutdown circuit :
• Built-in ON/OFF circuit :
• Small package :
• Lead-free products
1.2 to 6.0 V, selectable in 0.1 V steps.
Selectable from 1.8 to 8.2 V (S-1133B00/S-1133A00)
2.0 to 10 V
±1.0% accuracy (1.2 to 1.4 V output product : ±15 mV accuracy)
130 mV typ. (3.0 V output product, IOUT = 100 mA)
During operation : 60 µA typ., 90 µA max.
During shutdown : 0.1 µA typ., 1.0 µA max.
300 mA output is possible (at VIN ≥ VOUT(S) + 1.0 V)*1
A ceramic capacitor of 1.0 µF or more can be used for the input and output
capacitors.
(A ceramic capacitor of 2.2 µF or more can be used for products whose
output voltage is 1.7 V or less.)
70 dB typ. (at 1.0 kHz, VOUT = 1.2 V)
Overcurrent of output transistor can be restricted.
Prevents damage due to overheating.
Ensures long battery life.
SOT-89-5, SNT-8A
*1. Attention should be paid to the power dissipation of the package when the output current is large.
Applications
• Power supply for battery-powered devices
• Power supply for communication devices
• Power supply for home electric appliances
Packages
Package Name
SOT-89-5
SNT-8A
Package
UP005-A
PH008-A
Drawing Code
Tape
Reel
UP005-A
UP005-A
PH008-A
PH008-A
Land
UP005-A
PH008-A
Seiko Instruments Inc.
1
1 page  
HIGH RIPPLE-REJECTION AND LOW DROPOUT MIDDLE-OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.1_00
S-1133 Series
Table 1 (2/2)
Output Voltage
SOT-89-5
www.datasheet4u.com 5.7 V ±1.0%
S-1133B57-U5T1G
5.8 V ±1.0%
S-1133B58-U5T1G
5.9 V ±1.0%
S-1133B59-U5T1G
6.0 V ±1.0%
S-1133B60-U5T1G
Remark Please contact our sales office for type A products.
SNT-8A
S-1133B57-I8T1G
S-1133B58-I8T1G
S-1133B59-I8T1G
S-1133B60-I8T1G
Seiko Instruments Inc.
5
5 Page 
HIGH RIPPLE-REJECTION AND LOW DROPOUT MIDDLE-OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.1_00
S-1133 Series
*1. VOUT(S) : Extarnal setting reference voltage ( = 1.8 V)
*2. The output current at which the output voltage becomes 95% of VVADJ after gradually increasing the output current.
www.d*a3t.ashVedeVrto4OpuU=.Tc3VoimIsN1th−e(VouOUtpTu3 t×v0o.l9ta8g)e when VIN = VOUT(S) + 1.0 V and IOUT = 100 mA.
VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input
voltage.
*4. The change in temperature [mV/°C] is calculated using the following equation.
∆VOUT
[ ] [ ] [ ]∆Ta
mV/°C
*1
=
VOUT(S)
V
*2
×
∆VOUT
∆Ta VOUT
ppm/°C *3 ÷ 1000
*1. The change in temperature of the output voltage
*2. Extarnal setting reference voltage
*3. Output voltage temperature coefficient
*5. The output current can be at least this value. Due to restrictions on the package power dissipation, this value may not
be satisfied. Attention should be paid to the power dissipation of the package when the output current is large. This
specification is guaranteed by design.
Seiko Instruments Inc.
11
11 Page | ||
| Páginas | Total 37 Páginas | |
| PDF Descargar | [ Datasheet S-1133.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| S-1131 | HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR | Seiko Instruments |
| S-1132 | High Ripple Rejection Low Dropout Middle Output Current CMOS Voltage Regulator | Seiko Instruments |
| S-1132B34 | High Ripple Rejection Low Dropout Middle Output Current CMOS Voltage Regulator | Seiko Instruments |
| S-1133 | HIGH RIPPLE-REJECTION AND LOW DROPOUT MIDDLE-OUTPUT CURRENT CMOS VOLTAGE REGULATOR | Seiko Instruments |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |