|
|
Número de pieza | MB90595 | |
Descripción | (MB90F59x) 16-bit Proprietary Microcontroller | |
Fabricantes | Fujitsu Media Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MB90595 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-13705-3E
16-bit Proprietary Microcontroller
CMOS
F2MC-16LX MB90595/595G Series
www.DataSheetM4U.comB90598/F598/F598G/V595/V595G
s DESCRIPTION
The MB90595/595G series with FULL-CAN*1 interface and FLASH ROM is especially designed for automotive
and industrial applications. Its main features are two on board CAN Interfaces, which conform to V2.0 Part A and
Part B, while supporting a very flexible message buffer scheme and so offering more functions than a normal full
CAN approach.
The instruction set of F2MC-16LX CPU core inherits an AT architecture of the F2MC*2 family with additional
instruction sets for high-level languages, extended addressing mode, enhanced multiplication/division instructions,
and enhanced bit manipulation instructions. The microcontroller has a 32-bit accumulator for processing long
word data.
The MB90595/595G series has peripheral resources of 8/10-bit A/D converters, UART (SCI), extended I/O serial
interface, 8/16-bit PPG timer, I/O timer (input capture (ICU), output compare (OCU)) and stepping motor controller.
*1: Controller Area Network (CAN) - License of Robert Bosch GmbH
*2: F2MC stands for FUJITSU Flexible Microcontroller.
s FEATURES
• Clock
Embedded PLL clock multiplication circuit
Operating clock (PLL clock) can be selected from divided-by-2 of oscillation or one to four times the oscillation
(at oscillation of 4 MHz, 4 MHz to 16 MHz).
Minimum instruction execution time: 62.5 ns (operation at oscillation of 4 MHz, four times the oscillation clock,
VCC of 5.0 V)
(Continued)
s PACKAGE
100-pin Plastic QFP
(FPT-100P-M06)
1 page MB90595/595G Series
(Continued)
Features
MB90598
MB90F598/F598G
MB90V595/V595G
CAN Interface
www.DataSheet4U.com
Number of channels: 1
Conforms to CAN Specification Version 2.0 Part A and B
Automatic re-transmission in case of error
Automatic transmission responding to Remote Frame
Prioritized 16 message buffers for data and ID’s
Supports multiple messages
Flexible configuration of acceptance filtering:
Full bit compare / Full bit mask / Two partial bit masks
Supports up to 1Mbps
CAN bit timing setting:
MB90xxx:TSEG2 ≥ RSJW+2TQ
MB90xxxG:TSEG2 ≥ RSJW
Stepping motor controller Four high current outputs for each channel
(4 channels)
Synchronized two 8-bit PWM’s for each channel
External interrupt circuit
Number of inputs: 8
Started by a rising edge, a falling edge, an “H” level input, or an “L” level input.
Serial IO
Clock synchronized transmission (31.25 K/62.5 K/125 K/500 K/1 Mbps at system clock
frequency of 16 MHz)
LSB first/MSB first
Watchdog timer
Reset generation interval: 3.58 ms, 14.33 ms, 57.23 ms, 458.75 ms
(at oscillation of 4 MHz, minimum value)
Flash Memory
Supports automatic programming, Embedded Algorithm TM and
Write/Erase/Erase-Suspend/Resume commands
A flag indicating completion of the algorithm
Hard-wired reset vector available in order to point to a fixed boot sector in Flash
Memory
Boot block configuration
Erase can be performed on each block
Block protection with external programming voltage
Flash Writer from Minato Electronics Inc.
Low-power consumption
(stand-by) mode
Sleep/stop/CPU intermittent operation/clock timer/hardware stand-by
Process
CMOS
Power supply voltage for
operation*2
+5 V±10 %
Package
QFP-100
PGA-256
*1: It is setting of DIP switch S2 when Emulation pod (MB2145-507) is used.
Please refer to the MB2145-507 hardware manual (2.7 Emulator-specific Power Pin) about details.
*2: Varies with conditions such as the operating frequency. (See section “s Electrical Characteristics.”)
5
5 Page Circuit Type
F
www.DataSheet4U.com
G
H
MB90595/595G Series
Circuit
VCC
P-ch
High current
N-ch
Remarks
• CMOS high current output
• CMOS Hysteresis input
R
HYS
VCC
P-ch
N-ch
R HYS
R
T TTL
R HYS
R
• CMOS output
• CMOS Hysteresis input
• TTL input
(MB90F598/F598G, only in Flash mode)
• Hysteresis input
Pull-down Resistor: 50 Ω approx.
(except MB90F598/F598G)
11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet MB90595.PDF ] |
Número de pieza | Descripción | Fabricantes |
MB90590 | (MB90F59xx) 16-bit Proprietary Microcontroller | Fujitsu Media Devices |
MB90590G | (MB90F59xx) 16-bit Proprietary Microcontroller | Fujitsu Media Devices |
MB90591 | (MB90F59xx) 16-bit Proprietary Microcontroller | Fujitsu Media Devices |
MB90594 | (MB90F59xx) 16-bit Proprietary Microcontroller | Fujitsu Media Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |