DataSheet26.com

BXA10 PDF даташит

Спецификация BXA10 изготовлена ​​​​«Artesyn Technologies» и имеет функцию, называемую «8-10W Wide Input DC/DC Converters».

Детали детали

Номер произв BXA10
Описание 8-10W Wide Input DC/DC Converters
Производители Artesyn Technologies
логотип Artesyn Technologies логотип 

3 Pages
scroll

No Preview Available !

BXA10 Даташит, Описание, Даташиты
BXA10 Serieswww.DataSheet4U.com
Single and dual output
DC/DC CONVERTERS 8-10W Wide Input DC/DC Converters
1 x 2 x 0.395 inch package with stand-offs
13.3 Watts/in3 power density
CISPR22 and EN55022 conducted emission level A
UL, CSA and VDE approvals (48V input only)
Continuous short circuit protection
Optional remote ON/OFF
The BXA10 series of DC/DC converters, comprising 7 different models, is designed for
a wide range of applications including communications, industrial systems and mobile
battery powered systems. Packing up to 10 Watts of power into a 2 x 1 x 0.395 inch
package, with efficiencies as high as 85%, the BXA10 has wide input ranges of 9-18VDC
and 18-75VDC, and is available in single and dual output versions. Isolation of 1500VDC,
approval to EN60950 2nd edition, coupled with reduced conducted noise for simplified
compliance to FCC Part 15 level A and EN55022 level A, make the BXA10 ideal for
telecommunications and distributed power applications. Other features include
overvoltage protection, continuous short circuit protection with automatic recovery and
remote on/off, all of which minimize the need for external circuitry and make the BXA10 a
recommended component in distributed power systems.
1
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Line regulation
LL to HL, single output
LL to HL, dual output
±0.2%
±0.2%
Load regulation
10% to 100% FL (See Note 4) ±0.5%
Minimum load
48V models
12V models
10% full load
No minimum load
Overshoot
At start-up
10% max.
Ripple and noise
(See Note 2)
5Hz to 20MHz
100mV pk-pk, max.
20mV rms
Transient response
25% load step
±2.0% max. dev.,
250µs recovery
to within ±1.0%
Temperature coefficient
±0.02%/°C max.
Overvoltage protection Clamp type
See table
Short circuit protection Hiccup
Continuous
automatic recovery
INPUT SPECIFICATIONS
Input voltage range
12VDC (See Note 6)
48VDC
9 to 18VDC
18 to 75VDC
Input filter
Pi type
Start up surge current Resistive load
1.5A max.
Remote ON/OFF
ON (See Note 3)
OFF
OFF idle current
Open collector compatible
High impedance >400k
Low impedance <1.0k
<1.5mA
Start-up time
1.6s, max.
EMC CHARACTERISTICS
Conducted emissions
ESD air
ESD contact
Surge
Fast transients
Radiated immunity
Conducted immunity
EN55022, FCC, (See Note 8) Level A
EN61000-4-2, level 2 Perf. criteria 1
EN61000-4-2, level 3 Perf. criteria 1
EN61000-4-5, level 2 Perf. criteria 1
EN61000-4-4, level 2 Perf. criteria 1
EN61000-4-3, level 3 Perf. criteria 1
EN61000-4-6, level 3 Perf. criteria 1
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage
Input/output
Input or output to case
1500VDC
1000VDC
Switching frequency
Fixed
400kHz
Approvals and
standards
Safety
VDE0805, EN60950, IEC950
UL1950, CSA C22.2 No. 950
Case material
Black coated, six-sided metal case
Material flammability
UL94V-0
Weight
20g (0.71oz)
MTBF
MIL-HDBK-217F
Bellcore
519,000 hours
>2 million hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating ambient
-25°C to +71°C
(See derating curve)
Non-operating amb. -55°C to +125°C
Case
+110°C max.
Derating
See derating curve
Cooling
Free air convection cooled
Relative humidity
Non-condensing
5% to 95% RH
Altitude
Operating
Non operating
10,000 feet max.
40,000 feet max.
Vibration
5Hz to 500Hz
2.5G rms (approx.)
File Name: BXA10.PDF Rev: 02 Oct 2002









No Preview Available !

BXA10 Даташит, Описание, Даташиты
BXA10 Serieswww.DataSheet4U.com
Single and dual output
DC/DC CONVERTERS 8-10W Wide Input DC/DC Converters
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
2
INPUT
VOLTAGE
9-18VDC
9-18VDC
9-18VDC
18-75VDC
18-75VDC
18-75VDC
18-75VDC
OUTPUT
VOLTAGE
5.0V
15.0V
±5.0V
5.0V
±5.0V
±12.0V
±15.0V
OUTPUT
CURRENT
2.0A
0.67A
±1.0A
2.0A
±1.0A
±0.416A
±0.333A
INPUT
CURRENT (1)
1.1A
1.05A
1.05A
0.26A
0.26A
0.25A
0.25A
TYPICAL
EFFICIENCY
81%
85%
81%
82%
82%
84%
84%
OVP
6.2VDC
18VDC
12VDC
6.8VDC
12VDC
30VDC
36VDC
REGULATION (Typ.)
LINE
LOAD
±0.2%
±0.5%
±0.2%
±0.5%
±0.2%
±0.5%
±0.2%
±0.5%
±0.2%
±0.5%
±0.2%
±0.5%
±0.2%
0.5%
MODEL
NUMBER (3)
BXA10-12S05
BXA10-12S15
BXA10-12D05
BXA10-48S05
BXA10-48D05
BXA10-48D12
BXA10-48D15
Notes
1 At nominal input and output voltage and maximum load.
2 Output ripple can be reduced to <50mV with the addition of a 33µF, 25V,
AVX-TPS (or equivalent) tantalum capacitor. Consult factory for further
information.
3 For units with optional remote ON/OFF, please add the suffix ‘-S’ to the
model number: e.g. BXA10-48S05-S. Maximum open pin voltage 14VDC.
4 Assumes balanced loads on dual output models.
5 High impedance source/long input power cable may necessitate the
introduction of an input filter.
6 Typical 9-18VDC model start-up voltage is 9V. Maximum start-up voltage
is 9.5V (>0°C) or 9.7V (<0°C).
7 It is recommended that an IEC127, 250V, fast blow fuse is used rated at
4A for nominal 12V models and 2A for 48V models.
8 To achieve compliance to EN55022-A and FCC part 15 Class A, external
capacitors of the following values are needed:
Model
BXA10-12xxx
BXA10-48xxx
C1*
10µF film, 25V
10µF film, 100V
C2
0.22µF film
0.22µF film
C3
0.22µF film
0.22µF film
(C2, C3 voltage rating application dependent)
* Siemens P.N. B32512-J1106-J or equivalent.
PIN CONNECTIONS
PIN NUMBER
1
2
3
4
5
6*
SINGLE OUTPUT
+Vin
– Vin
+ Vout
No Pin
– Vout
Remote ON/OFF
DUAL OUTPUT
+ Vin
– Vin
+ Vout
Common
– Vout
Remote ON/OFF
* Optional remote ON/OFF pin. Add Suffix ‘-S’ to the model number, Note 3.
www.artesyn.com
File Name: BXA10.PDF Rev: 02 Oct 2002









No Preview Available !

BXA10 Даташит, Описание, Даташиты
BXA10 Serieswww.DataSheet4U.com
Single and dual output
DC/DC CONVERTERS 8-10W Wide Input DC/DC Converters
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
3
+ Input
C1
Input Return
C2 C3
Ground Plane
BXA10
DERATING CURVE
Output Power (Watts)
100%
71ºC
110ºC
0%
-25ºC 0ºC 20ºC 40ºC 60ºC 80ºC 100ºC 120º C
Ambient Temperature (˚C)
Mechanical Notes
A Recommended PCB hole diameter is 0.052 inches (1.32mm).
B All pins are in true position within 0.010 inches (0.25mm).
C Tolerance (inches): .XX = ±0.02
XXX = ±0.005
0.1
(2.5) 0.4
(10.2)
0.4
(10.2)
2.0
(50.8) 0.8
(20.4)
0.6
(15.2)
345
BBOOTTTOOMMVVIEIEWW
12 6
0.040 Dia. (1.0)
0.020
(0.5)
0.4 0.2 0.3
(10.2) (5.1) (7.6)
1.00 (25.4)
0.135 ± 0.010
(3.4 ± 0.2)
0.395 (10.03)
max.
ALL DIMENSIONS IN INCHES (mm)
International Safety Standard Approvals
VDE0805/EN60950/IEC950 File No. 10401-3336-1094
Licence No. 6298 and 6299
UL1950 File No. E136005
CSA C22.2 No. 950 File No. LR41062C
Data Sheet © Artesyn Technologies® 2002
The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
www.artesyn.com
File Name: BXA10.PDF Rev: 02 Oct 2002










Скачать PDF:

[ BXA10.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
BXA108-10W Wide Input DC/DC ConvertersArtesyn Technologies
Artesyn Technologies
BXA10-12S05JDC-DC / Low Power Isolated IndustrialEmerson
Emerson
BXA10-48D05JDC-DC / Low Power Isolated IndustrialEmerson
Emerson
BXA10-48D12-SJDC-DC / Low Power Isolated IndustrialEmerson
Emerson

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск