DataSheet26.com

5962-89839 PDF даташит

Спецификация 5962-89839 изготовлена ​​​​«ETC» и имеет функцию, называемую «5962-89839».

Детали детали

Номер произв 5962-89839
Описание 5962-89839
Производители ETC
логотип ETC логотип 

15 Pages
scroll

No Preview Available !

5962-89839 Даташит, Описание, Даташиты
www.DataSheet4U.com
REVISIONS
LTR DESCRIPTION
A Updated document. Added three device types 04, 05, and 06. Added
S package. Added two vendors. Editorial changes throughout.
B Update boilerplate. Add device type 07 for vendor 66675. Editorial
changes throughout.
C Add device types 08 through 10. Update boilerplate. Editorial
changes throughout.
D Add device types 11 through 14. Update boilerplate. ksr
E Lower tPD and tCO minimum value by 1 ns for devices 01, 02, and 03.
ksr
F Boilerplate update, part of 5 year review. ksr
DATE (YR-MO-DA)
91-08-23
APPROVED
M. A. Frye
94-07-12
95-05-12
98-12-04
99-08-04
07-04-24
M. A. Frye
M. A. Frye
Raymond Monnin
Raymond Monnin
Robert M. Heber
THE ORIGINAL FIRST PAGE HAS BEEN REPLACED
REV
SHEET
REV
SHEET
REV STATUS
REV
FFF
OF SHEETS
SHEET
123
PMIC N/A
PREPARED BY
Kenneth S. Rice
STANDARD
MICROCIRCUIT
DRAWING
THIS DRAWING IS AVAILABLE
FOR USE BY ALL
DEPARTMENTS
AND AGENCIES OF THE
DEPARTMENT OF DEFENSE
AMSC N/A
CHECKED BY
Wm J. Johnson
APPROVED BY
Michael A. Frye
DRAWING APPROVAL DATE
89-12-18
REVISION LEVEL
F
DSCC FORM 2233
APR 97
.
FFFFFFFFFF
4 5 6 7 8 9 10 11 12 13
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
http://www.dscc.dla.mil
MICROCIRCUIT, MEMORY, DIGITAL,
EE PROGRAMMABLE ARRAY LOGIC,
MONOLITHIC SILICON
SIZE
A
SHEET
CAGE CODE
67268
5962-89839
1 OF 13
5962-E314-07









No Preview Available !

5962-89839 Даташит, Описание, Даташиты
www.DataSheet4U.com
1. SCOPE
1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in
accordance with MIL-PRF-38535, appendix A.
1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example:
5962-89839
01
R
A
Drawing number
Device type
(see 1.2.1)
Case outline
(see 1.2.2)
Lead finish
(see 1.2.3)
1.2.1 Device type(s). The device type(s) identify the circuit function as follows:
Device type Generic number
Circuit function
Access time
current
01 16V8 16-input, 8-output, EECMOS, architecturally
generic, programmable AND-OR array
30 130
02 16V8 16-input, 8-output, EECMOS, architecturally
generic, programmable AND-OR array
20 130
03 16V8 16-input, 8-output, EECMOS, architecturally
generic, programmable AND-OR array
15 130
04, 11
16V8
16-input, 8-output, EECMOS, architecturally
generic, programmable AND-OR array
10 130
05 16V8 16-input, 8-output, EECMOS, architecturally
generic, programmable AND-OR array
25 65
06 16V8 16-input, 8-output, EECMOS, architecturally
generic, programmable AND-OR array
20 65
07 16V8 16-input, 8-output, EECMOS, architecturally
generic, programmable AND-OR array
7.5 130
08, 12
16V8
16-input, 8-output, EECMOS, architecturally
generic, programmable AND-OR array
25 65
09, 13
16V8
16-input, 8-output, EECMOS, architecturally
generic, programmable AND-OR array
15 130
10, 14
16V8
16-input, 8-output, EECMOS, architecturally
generic, programmable AND-OR array
15 65
1.2.2 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows:
Outline letter
Descriptive designator
Terminals
Package style
R
GDIP1-T20 or CDIP2-T20
20
S
GDFP2-F20 or CDFP3-F20
20
2 CQCC1-N20
20
Dual-in-line
Flat package
Square chip carrier package
1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A.
STANDARD
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
F
5962-89839
SHEET
2









No Preview Available !

5962-89839 Даташит, Описание, Даташиты
www.DataSheet4U.com
1.3 Absolute maximum ratings.
Supply voltage range ...................................................................................
Input voltage range applied..........................................................................
Off-state output voltage range applied .........................................................
Storage temperature range ..........................................................................
Maximum power dissipation (PD) 2/.............................................................
Lead temperature (soldering, 10 seconds)...................................................
Thermal resistance, junction-to-case (θJC)..................................................
Junction temperature (TJ).............................................................................
Data retention ..............................................................................................
Endurance....................................................................................................
-0.5 V dc to +7.0 V dc
-2.5 V dc to VCC + 1.0 V dc 1/
-2.5 V dc to VCC + 1.0 V dc 1/
-65°C to +150°C
1.5 W
+260°C
See MIL-STD-1835
+175°C
10 years (minimum)
100 erase/write cycles (minimum)
1.4 Recommended operating conditions.
Supply voltage range (VCC).........................................................................
High level input voltage range (VIH).............................................................
Low level input voltage range (VIL) ..............................................................
High level output current (IOH) ....................................................................
Low level output current (IOL) ......................................................................
Case operating temperature range (TC) ......................................................
4.5 V dc to 5.5 V dc
2.0 V dc to VCC + 1.0 V dc
VSS -0.5 V dc to +0.8 V dc
-2.0 mA maximum
12 mA maximum
-55°C to +125°C
2. APPLICABLE DOCUMENTS
2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part
of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883 - Test Method Standard Microcircuits.
MIL-STD-1835 - Interface Standard Electronic Component Case Outlines.
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-103 - List of Standard Microcircuit Drawings.
MIL-HDBK-780 - Standard Microcircuit Drawings.
(Copies of these documents are available online at http://assist.daps.dla.mil/quicksearch/ or http://assist.daps.dla.mil or from
the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text
of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
1 Minimum input voltage is -0.5 V dc which may undershoot to -2.5 V dc for pulses less than 20 ns.
2/ Must withstand the added PD due to short circuit test (e.g., ISC).
STANDARD
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
F
5962-89839
SHEET
3










Скачать PDF:

[ 5962-89839.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
5962-898395962-89839ETC
ETC
5962-8983903RA5962-89839ETC
ETC

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск