DataSheet26.com

0603NPOxxxxxx PDF даташит

Спецификация 0603NPOxxxxxx изготовлена ​​​​«Synton-Tech» и имеет функцию, называемую «Multilayer Capacitors».

Детали детали

Номер произв 0603NPOxxxxxx
Описание Multilayer Capacitors
Производители Synton-Tech
логотип Synton-Tech логотип 

27 Pages
scroll

No Preview Available !

0603NPOxxxxxx Даташит, Описание, Даташиты
www.DataSheet4U.com
SYNTON-TECH CORPORATION
MULTILAYER CERAMIC CAPACITOR
File No.:
Version:
Page:
Date:
1. SUBJECT : This specification applies on the chip capacitor made by
SYNTON-TECH’s Corporation
2. PART NUMBER : Part number of the chip capacitor is identified by the
size,dielectric, capacitance value,tolerance, voltage
CC-02-D
A
1
2006.09.01
Example : DESCRIPTION : 0603 NPO 100PF 50V J
SYNTON CODE : 0603 NPO 101 J 50V
SIZE
0402
0603
0805
1206
1210
1808
1812
2220
DIELECTRIC
NPO
X7R
Y5V
Z5U
CAPACITANCE
VALUE
3 Digits :
5R1 : 5.1PF
100 : 10PF
101 : 100PF
102 : 1NF
103 : 10NF
104 : 0.1UF
105 : 1UF
TOLERANCE
10PF and below
A: ±0.05PF
B : ±0.10PF
C : ±0.25PF
D : ±0.5PF
More than 10pF
F : ±1%
G : ±2%
J : ±5%
K : ±10%
M : ±20%
Z : -20~+80%
VOLTAGE
6.3V
10V
16V
25V
50V
100V
200V
250V
500V
1KV
2KV
3KV
4KV
APPROVED
Carol
CHECKED
May
DESIGNED
REMARK
Chen
9/11:SGS
DOCUMENT NO.
0201010200
Confidential, Do Not Disseminate.









No Preview Available !

0603NPOxxxxxx Даташит, Описание, Даташиты
www.DataSheet4U.com
SYNTON-TECH CORPORATION
MULTILAYER CERAMIC CAPACITOR
File No.:
Version:
Page:
Date:
CC-02-D
A
2
2006.09.01
3. CAPACITOR CLASSIFICATION
Multi-layer ceramic capacitors are available in wide range of characteristics.
Electronic Industries Association (EIA) and the military have established
categories to help divide the basic characteristics into more easily specified
classes. The basic industry specification for ceramic capacitor is EIA
specification RS-198 and as noted in the general section, it specifies
temperature-compensating capacitors as class I capacitors. These are
specified by the military under specification MIL-C-20. General-purpose
capacitors with non-linear temperature coefficients are called Class II capacitors
by EIA and specified by military under MIL-C-11015 and MIL-C-39014.
The new high reliability military specification, MIL-C-123 covers both class
I and class II dielectrics.
Class I — Class I capacitors or temperature-compensating capacitors are usually
made from mixtures of titanates where barium titanate is normally not a major
part of mix. They have predictable temperature coefficients and in general,
do not have an aging characteristic. Thus they are the most stable capacitor
available. Normally the T.C.s of Class I temperature-compensating capacitors
are NP0 ( 30 ppm/ ).
Class II — General-purpose ceramic capacitors are called Class II capacitors
and have become extremely popular because of the high capacitance values
available in very small size. These capacitors are ferroelectrics and vary in
capacitance value under the influence of the environmental and electrical
operating conditions. Class II capacitors are affected by temperature voltage
frequency and time. Temperature effects for Class II ceramic capacitors are
exhibited as non-linear capacitance changes with temperature. Industry standards
for Mid-K dielectrics, such as X7R and High-K dielectrics, such as Z5U and Y5V
are defined as Class II formulations.
Confidential, Do Not Disseminate.









No Preview Available !

0603NPOxxxxxx Даташит, Описание, Даташиты
www.DataSheet4U.com
SYNTON-TECH CORPORATION
MULTILAYER CERAMIC CAPACITOR
File No.:
Version:
Page:
Date:
CC-02-D
A
3
2006.09.01
4. MATERIALS AND PERFORMANCE CHARACTERIZATION
Designation
Temperature
compensating
NPO,COG
Intermediate K X7R,
BX
High K Y5V
High K Z5U
Class
I
II
II
II
Temperature Range ( )
-55 ~ +125
-55 ~ +125
-25 ~ +85
+10 ~ +85
Temp-Cap Change
± 30 ppm/
± 15 %
+22 ~ -82 %
+22 ~ -56 %
The T.C curve of each material. (for reference)
5. TECHNOLOGY
Multi-layer ceramic capacitor constructed by depositing alternative layers
of ceramic dielectric materials and internal metallic electrodes, by advanced
ceramic manufacturing technology, and co-firing into an indestructible
homogeneous body, then completed with application of metal end terminations
which are fired on to assure that permanent connection of individual internal
electrodes are in parallel.
The terminations also can be nickel-plated and then solder plated to give the
chip capacitors nickel-barrier terminations which have much better leaching
resistance during soldering.
Reliable performances are built-in through exact formulation of dielectric powders, preparation of
conductive paste, advanced automatic manufacturing, and strict
quality control to assure excellent control in dielectric thickness, electrode integrity,
and electrode-to-termination continuity.
Confidential, Do Not Disseminate.










Скачать PDF:

[ 0603NPOxxxxxx.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
0603NPOxxxxxxMultilayer CapacitorsSynton-Tech
Synton-Tech

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск