DataSheet26.com

2322-xxx-xxxxx PDF даташит

Спецификация 2322-xxx-xxxxx изготовлена ​​​​«Yageo» и имеет функцию, называемую «General Purpose Chip Resistors».

Детали детали

Номер произв 2322-xxx-xxxxx
Описание General Purpose Chip Resistors
Производители Yageo
логотип Yageo логотип 

10 Pages
scroll

No Preview Available !

2322-xxx-xxxxx Даташит, Описание, Даташиты
www.DataSheet4U.com
DATA SHEET
GENERAL PURPOSE CHIP RESISTORS
RC0603 (Pb Free)
5%, 1%









No Preview Available !

2322-xxx-xxxxx Даташит, Описание, Даташиты
www.DataSheet4U.com
Chip Resistor Surface Mount RC SERIES 0603 (Pb Free)
Product specification 2
10
SCOPE
This specification describes RC0603 series chip resistors with lead-free terminations made by thick film process.
ORDERING INFORMATION
Part number is identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and
resistance value.
PHYCOMP ORDERING CODE
12NC CODE
2322 / 2350 XXX XXXXX L
(1) (2) (3) (4)
TYPE/ START
0603 IN (1)
RC21 2322
RC22 2322
HRC21 2350
Jumper 2322
TOL. RESISTANCE
(%) RANGE
±5% 1 to 10 M
±1% 1 to 10 M
±5% 11 to 22 M
- 0
PAPER / PE TAPE ON REEL (units) (2)
5,000
10,000/not preferred
20,000
702 60xxx
702 70xxx
702 81xxx
704 6xxxx
704 7xxxx
704 8xxxx
522 10xxx
-
-
702 96001
702 97001
702 92002
(1) The resistors have a 12-digit
ordering code starting with
2322.
(2) The subsequent 4 or 5 digits
indicate the resistor
tolerance and packaging.
(3) The remaining 4 or 3 digits
represent the resistance value
with the last digit indicating
the multiplier as shown in the
table of “Last digit of 12NC”.
(4) “L” means lead-free
terminations.
ORDERING EXAMPLE
The ordering code of a RC22
resistor, value 56 X with ±1%
tolerance, supplied in tape of
5,000 units per reel is:
232270465609L.
Last digit of 12NC
Resistance decade (3)
0.01 to 0.0976 X
0.1 to 0.976 X
1 to 9.76 X
10 to 97.6 X
100 to 976 X
1 to 9.76 kX
10 to 97.6 kX
100 to 976 kX
1 to 9.76 MX
10 to 97.6 MX
Example:
0.02 X
0.3 X
1X
33 kX
10 MX
=
=
=
=
=
Last digit
0
7
8
9
1
2
3
4
5
6
0200 or 200
3007 or 307
1008 or 108
3303 or 333
1006 or 106
CTC CODE
RC0603 X X X XX XXXX L
(1) (2) (3) (4)
(5) (6)
(1) TOLERANCE
F = ±1%
J = ±5%
(2) PACKAGING TYPE
R = Paper/PE taping reel
(3) TEMPERATURE COEFFICIENT
OF RESISTANCE
– = Base on spec
(4) TAPING REEL
07 = 7 inch dia. Reel
10 = 10 inch dia. Reel (not preferred)
13 = 13 inch dia. Reel
(5) RESISTANCE VALUE
5R6, 56R, 560R, 5K6, 56K, 22M
(6) RESISTOR TERMINATIONS
L = Lead free terminations (pure Tin)
ORDERING EXAMPLE
The ordering code of a RC0603
chip resistor, value 56 X with
±1% tolerance, supplied in 7-inch
tape reel is: RC0603FR-0756RL.
NOTE
1. The “L” at the end of the code is only for ordering. On the reel label, the standard CTC or 12NC will be mentioned an additional stamp
“LFP”= lead free production.
2. Products with lead in terminations fulfil the same requirements as mentioned in this datasheet.
3. Products with lead in terminations will be phased out in the coming months (before July 1st, 2006)
Aug 19, 2004 V.2
www.yageo.com









No Preview Available !

2322-xxx-xxxxx Даташит, Описание, Даташиты
www.DataSheet4U.com
Chip Resistor Surface Mount RC SERIES 0603 (Pb Free)
Product specification 3
10
MARKING
RC0603
Fig. 1
ynsc001
Value=10K
E-24 series: 3 digits
First two digits for significant figure and 3rd digit
for number of zeros
Fig. 2
+
ynsc002
Value=12.4 K
ynsc003
Fig. 3 E-24 1% Value=56K
E-96 series: 3 digits for 0603 ±1% EIA-96 marking
method
For 0603 ±1% E-24 series, one short bar under
marking letter
For marking codes, please see EIA-marking code rules in data sheet “Chip resistors instruction”.
CONSTRUCTION
The resistors are constructed out of
a high-grade ceramic body. Internal
metal electrodes are added at each
handbook, 4 columns
end and connected by a resistive
paste. The composition of the paste
H
is adjusted to give the approximate
required resistance and laser cutting
of this resistive layer that achieves
I2
tolerance trims the value. The
Fig. 4 Chip resistor construction
resistive layer is covered with a
protective coat and printed with the
resistance value. Finally, the two external terminations (pure Tin) are added. See fig. 4.
DIMENSIONS
Table 1
TYPE
L (mm)
W (mm)
H (mm)
I1 (mm)
I2 (mm)
RC0603
1.60 ±0.1
0.80 ±0.10
0.45 ±0.10
0.25 ±0.15
0.25 ±0.15
I1
W
Fig. 5 Chip resistor dimension
L
protective coat
resistor layer
inner electrode
end termination
ceramic substrate MBE940_a
protective coat
MBE940_a
For dimension see Table 1
Aug 19, 2004 V.2
www.yageo.com










Скачать PDF:

[ 2322-xxx-xxxxx.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
2322-xxx-xxxxxGeneral Purpose Chip ResistorsYageo
Yageo

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск