|
|
Número de pieza | SY88289BL | |
Descripción | CML Limiting Post Amplifier | |
Fabricantes | Micrel Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SY88289BL (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
No Preview Available ! SY88289BL
3.3V, 3.2Gbps CML Limiting Post Amplifier
with High-Gain TTL Loss-of-Signal
General Description
Features
The SY88289BL low-power limiting, post amplifier is
designed for use in fiber-optic receivers. The device
connects to typical transimpedance amplifiers (TIAs).
The linear signal output from TIAs can contain
significant amounts of noise and may vary in amplitude
over time. The SY88289BL quantizes these signals and
outputs CML level waveforms.
• Single 3.3V power supply
• DC to 3.2Gbps operation
• Low-noise CML data outputs
• High-gain LOS
• Chatter-free open-collector TTL signal detect (LOS)
output with internal 4.75kΩ pull-up resistor
The SY88289BL operates from a single +3.3V power
supply, over temperatures ranging from –40oC to +85oC.
With its wide bandwidth, high gain, and signals with data
rates up to 3.2Gbps and as small as 5mVPP can be
amplified to drive devices with CML inputs or AC-
• TTL /EN input
• Programmable LOS level set (LOSLVL)
• Ideal for mutil-rate applications
• Available in a tiny 16-pin MLF® package
coupled CML/PECL inputs.
Applications
The SY88289BL generates a high-gain loss-of-signal
(LOS) open-collector TTL output. This function has a
high-gain input stage for increased LOS sensitivity. A
programmable loss-of-signal level set pin (LOSLVL) sets
the sensitivity of the input amplitude detection. LOS
• APON, BPON, EPON, and gpon
• Gigabit Ethernet
• Fibre Channel
• OC-3 and OC-12/24 SONET/SDH
asserts high if the input amplitude falls below wwthw.eDataSheet•4U.comHigh-gain line driver and line receiver
threshold set by LOSLVL and de-asserts low otherwise.
The enable bar input (/EN) de-asserts the true output
Markets
signal without removing the input signal. The LOS • FTTP
output can be fed back to the /EN input to maintain
output stability under a loss-of-signal condition. Typically
3.5dB LOS hysteresis is provided to prevent chattering.
All support documentation cab be found on Micrel’s web
site at: www.micrel.com.
• Optical transceivers
• Datacom/telecom
• Low-gain TIA interface
• Long reach FOM
Typical Application
MLF and MicroLeadFrame are registered trademarks of Amkor Technology.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
February 2007
M9999-021207-B
[email protected] or (408) 955-1690
1 page Micrel, Inc.
Typical Operating Characteristics
SY88289BL
February 2007
5 M9999-021207-B
[email protected] or (408) 955-1690
5 Page |
Páginas | Total 9 Páginas | |
PDF Descargar | [ Datasheet SY88289BL.PDF ] |
Número de pieza | Descripción | Fabricantes |
SY88289BL | CML Limiting Post Amplifier | Micrel Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |