|
|
PDF MP240D2 Data sheet ( Hoja de datos )
| Número de pieza | MP240D2 | |
| Descripción | (MP240D2 / MP240D4) Solid State Relays | |
| Fabricantes | Opto Twenty-Two | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MP240D2 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
DATA SHEET
Form 859-990514
SOLID-STATE RELAYS
page 1/12
Overview
In 1974, Opto 22 introduced the first liquid epoxy-filled
line of power solid-state relays (SSR). This innovation in
SSR design greatly improved the reliability and reduced the
cost of manufacturing. At that time, we also incorporated
into our manufacturing process 100% testing of every relay
produced under full load conditions. By 1978, Opto 22 had
gained such a reputation for reliability that we were recognized
as the world’s leading manufacturer of solid-state relays. Through
continuous manufacturing improvements and the same 100%
testing policy established 22 years ago, Opto 22 is still recognized
today for the very high quality and reliability of its complete line
of solid-state relays.
Power Series
Index
Page
Description
1 Introduction
2 All Models: General Specifications
3 120/240 Volt AC Power Series: General Specifications
4
120/240 Volt AC Power Series: Surge Current Data,
Thermal Data, and Dimensions
5 480/575 Volt AC Power Series: General Specifications
6
120/240 Volt AC Power Series Plastic Package
(Z Series): General Specifications
7 AC Power Printed Circuit Series: General Specifications
8 DC Switching Series: General Specifications
APPLICATION TIPS
9 Heat Sink Calculation, Duty Cycle Calculation
10 Transformer Loads, Solenoid Loads, and Lamp Loads
11 Solid-State Relays in Series, Lamp Loads, Heater Loads
12 Motor Loads
Z Series
P Series
MP Series
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590 • Phone: (909)695-3000 • (800)321-OPTO • Fax: (909)695-3095 • Internet: www.opto22.com
Inside Sales: (800)452-OPTO • Product Support: (800)TEK-OPTO • (909)695-3080 • Fax: (909)695-3017 • E-mail: [email protected]• FaxBack: (800)474-OPTO
www.DataSheet4U.com - Free DataSheet Site.
1 page  
DATA SHEET
Form 859-990514
SOLID-STATE RELAYS
page 5/12
Specifications
AC Power Series - 480/575 Volt
DC SERIES: The DC Series delivers isolated DC control to large OEM customers
worldwide.
AC SERIES: The AC Series offers the ultimate in solid-state reliability. All AC power
series relays feature a built-in snubber and zero voltage turn-on. Transient proof models
offer self-protection for noisy electrical environments.
Model
Number
Nominal
AC Line
Voltage
Nominal
Current
Rating
(Amps)
1 cycle
Surge
(Amps)
Peak
Nominal
Signal Input
Resist ance
(Ohms)
Signal
Pick-up
Voltage
Signal
Drop-out
Voltage
Peak Maximum Off-State
Repetitive Output Leakage
Voltage Voltage (mA)
Maximum Drop Maximum
Operating
Voltage
Range
(Volts AC)
I2t Rating
t=8.3
(ms)
Isolation θjc* Dissipation
Voltage (°C/Watt) (Watts/Amp)
480D10-12 480 10 110
1000
3VDC
(32V
Allowed)
1 VDC
1200 3.2 volts 11 mA 100-530
50 4,000VRMS 1.2
2.5
480D15-12 480 15 150
480D25-12 480 25 250
480D45-12 480 45 650
575D15-12 575 15 150
575D45-12 575 45 650
1000
1000
1000
1000
1000
3VDC
(32V
Allowed)
3VDC
(32V
Allowed)
3VDC
(32V
Allowed)
3VDC
(32V
Allowed)
3VDC
(32V
Allowed)
1 VDC
1 VDC
1 VDC
1 VDC
1 VDC
1200 3.2 volts 11 mA 100-530
1000 1.6 volts 11 mA 100-530
1000 1.6 volts 11 mA 100-530
1200 3.2 volts 15 mA 100-600
1000 1.6 volts 15 mA 100-600
50 4,000VRMS 1.2
250 4,000VRMS 1.3
1750 4,000VRMS 0.67
90 4,000VRMS 1.2
1750 4,000VRMS 0.67
2.5
1.3
0.9
2.5
0.9
Note: θjc* = Thermal resistance junction to base. Maximum junction temperature is 110°C.
Dimensional
Drawings
Thermal Ratings
Surge Current Data
Time
Second
Time***
(Cycles)
10-Amp
Peak
Amps
15-Amp
Peak
Amps
25-Amp 45-Amp
Peak Peak
Amps Amps
0.017
1
110 150 250 650
0.050
3
85 140 175 420
0.100
6
70 110 140 320
0.200 12 60 90 112 245
0.500 30 50 70 80 175
1 60 40 55 67 134
2 120 33 49 53 119
3 180 32 47 49 98
4 240 31 43 47 95
5 300 30 40 45 91
10 600 28 35 42 84
Note: ***60 HZ
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590 • Phone: (909)695-3000 • (800)321-OPTO • Fax: (909)695-3095 • Internet: www.opto22.com
Inside Sales: (800)452-OPTO • Product Support: (800)TEK-OPTO • (909)695-3080 • Fax: (909)695-3017 • E-mail: [email protected]• FaxBack: (800)474-OPTO
5 Page 
DATA SHEET
Form 859-990514
Applications
Tips (Continued)
SOLID-STATE RELAYS
page 11/12
Solid-State Relays In Series
In applications requiring greater current rating at higher voltage,
two Opto 22 SSRs may be operated in series for double the
voltage rating. The built-in snubber in each SSR assures proper
voltage sharing of the two SSRs in series. In the diagram below,
two 240-volt, 45-amp SSRs are connected in series for operation
on a 480-volt line. The control is shown with a parallel hook-up
but it should be noted that a serial connection can also be
implemented.
Lamp Loads
Since all Opto 22 SSRs are zero voltage switching, they
are ideal for driving incandescent lamps because the
initial inrush current into a cold filament is reduced.
The life of the lamp is increased when switched by a
zero voltage turn on SSR. The following table is a guide
to selecting an Opto 22 SSR for switching a given
incandescent lamp.
120 Volt Lamps
SSR CURRENT RATING LAMP RATING
2-Amp
100 Watt
4-Amp
400 Watt
10-Amp
1 Kilowatt
25-Amp
2 Kilowatt
45-Amp
3 Kilowatt
240 Volt Rating
SSR CURRENT RATING LAMP RATING
2-Amp
200 Watt
4-Amp
800 Watt
10-Amp
2 Kilowatt
25-Amp
4 Kilowatt
45-Amp
6 Kilowatt
Heater Loads
Care should be taken in selecting a SSR for driving a heater load if
the load is cycled on and off in a continuous manner as might occur in
a temperature control application. Constant cycling can cause thermal
fatigue in the thyristor chip at the point where the chip bonds to the
lead frame. Opto 22 employs a thick copper lead frame for mounting
the SCR chips in the power series SSRs to eliminate thermal fatigue
failures. In addition, Opto 22 recommends operating any SSR at 75%
rated current for cycling heater loads to ensure complete reliability.
The following table is a guide to selecting the proper SSR for a given
heater load.
Nominal SSR
Current Rating
2-Amp
4-Amp
10-Amp
25-Amp
45-Amp
10 480V
10 480V
Maximum
Recommended
Heater Current
1½-Amp
2½-Amp
7½-Amp
18-Amp
35-Amp
8-Amp
8-Amp
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590 • Phone: (909)695-3000 • (800)321-OPTO • Fax: (909)695-3095 • Internet: www.opto22.com
Inside Sales: (800)452-OPTO • Product Support: (800)TEK-OPTO • (909)695-3080 • Fax: (909)695-3017 • E-mail: [email protected]• FaxBack: (800)474-OPTO
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet MP240D2.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MP240D2 | Solid-State Relays |  OPTO22 |
| MP240D2 | (MP240D2 / MP240D4) Solid State Relays | Opto Twenty-Two |
| MP240D3 | (MP240D3 / MP240D4) NORMALLY-OPEN PC-MOUNT SOLID-STATE RELAY |  Crydom |
| MP240D4 | Solid-State Relays | OPTO22 |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |