DataSheet26.com

7704402xx PDF даташит

Спецификация 7704402xx изготовлена ​​​​«Intersil» и имеет функцию, называемую «(77044xxxx) LOGIC GATE».

Детали детали

Номер произв 7704402xx
Описание (77044xxxx) LOGIC GATE
Производители Intersil
логотип Intersil логотип 

13 Pages
scroll

No Preview Available !

7704402xx Даташит, Описание, Даташиты
REVISIONS
omLTR
DESCRIPTION
DATE (YR-MO-DA)
APPROVED
U.cC Convert to standardized military drawing format. Added device type 02.
t4Technical changes in 1.3, 1.4, table I and Table II. Delete CAGE 31019. Add
CAGE 18714. No approved sources for device type 01. Add figure 3. Editorial
echanges throughout.
heD Add device 03. Update boilerplate.
taSE Update boilerplate to MIL-PRF-38535 requirements. - jak
89-07-26
94-03-08
01-03-20
M. A. Frye
Monica L. Poelking
Thomas M. Hess
aF Made change to paragraph 3.5. Update boilerplate to MIL-PRF-38535
.Drequirements. - LTG
05-03-14
Thomas M. Hess
www U.comDevice type 01AX is
inactive for new design
t4as of 1 Oct. 1986
eFIRST PAGE OF THIS DRAWING HAS BEEN CHANGED.
heCURRENT CAGE CODE 67268
SREV
taSHEET
REV
aSHEET
.DREV STATUS
OF SHEETS
wPMIC N/A
wSTANDARD
w omMICROCIRCUIT
.cDRAWING
REV
SHEET
F F F F F F FF F F F F
1 2 3 4 5 6 7 8 9 10 11 12
PREPARED BY
A. J. Foley
CHECKED BY
C. R. Jackson
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
http://www.dscc.dla.mil
t4UTHIS DRAWING IS AVAILABLE
FOR USE BY ALL
eDEPARTMENTS
eAND AGENCIES OF THE
hDEPARTMENT OF DEFENSE
ataSAMSC N/A
APPROVED BY
Nelson A. Hauck
DRAWING APPROVAL DATE
77-09-26
REVISION LEVEL
F
w.DDSCC FORM 2233
wwAPR 97
MICROCIRCUIT, DIGITAL, CMOS, NOR
GATES, MONOLITHIC SILICON
SIZE
A
SHEET
CAGE CODE
14933
1 OF 12
77044
5962-E202-05









No Preview Available !

7704402xx Даташит, Описание, Даташиты
1. SCOPE
1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in
accordance with MIL-PRF-38535, appendix A.
1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example:
77044
01
C
A
Drawing number
Device type
(see 1.2.1)
Case outline
(see 1.2.2)
Lead finish
(see 1.2.3)
1.2.1 Device type(s). The device type(s) identify the circuit function as follows:
Device type
Generic number
Circuit function
01
4078B
8-input NOR gate
02
4078B
8-input NOR/OR gate
03
4002B
4-input NOR gate
1.2.2 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:
Outline letter
Descriptive designator
Terminals
Package style
A GDFP5-F14 or CDFP6-F14
C GDIP1-T14 or CDIP2-T14
14
14
Flat pack
Dual-in-line
1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A.
1.3 Absolute maximum ratings.
Supply voltage range (VDD) device type 01 .......................................................... -0.5 V dc to +18.0 V dc 1/
Supply voltage range (VDD) device type 02 and 03 .............................................. -0.5 V dc to +20.0 V dc 1/
Input voltage range .............................................................................................. -0.5 V dc to VDD + 0.5 V dc
DC input current (any one input) .......................................................................... ±10 mA
Storage temperature range (TSTG) ....................................................................... -65°C to +150°C
Maximum power dissipation (PD) ......................................................................... 500 mW 2/
Lead temperature (soldering, 10 seconds)........................................................... +300°C
Thermal resistance, junction-to-case (θJC) ........................................................... See MIL-STD-1835
Junction temperature (TJ) ................................................................................... +175°C
1.4 Recommended operating conditions. 1/
Supply voltage range (VDD) .................................................................................. +3.0 V dc to +18.0 V dc
Minimum low level input voltage (VIH) .................................................................. 3.5 V dc at VDD = 5.0 V dc
Maximum low level input voltage (VIL):................................................................. 1.5 V dc at VDD = 5.0 V dc
Case operating temperature range (TC) ................................................................ -55°C to +125°C
1/ Voltages referenced to the VSS terminal.
2/ For TA = +100°C to +125°C, derate linearly at 12 mW/°C to 200 mW.
STANDARD
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
F
77044
SHEET
2









No Preview Available !

7704402xx Даташит, Описание, Даташиты
2. APPLICABLE DOCUMENTS
2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of
this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883 - Test Method Standard Microcircuits.
MIL-STD-1835 - Interface Standard Electronic Component Case Outlines.
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-103 - List of Standard Microcircuit Drawings.
MIL-HDBK-780 - Standard Microcircuit Drawings.
(Copies of these documents are available online at http://assist.daps.dla.mil/quicksearch/ or http://assist.daps.dla.mil or from
the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of
this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific
exemption has been obtained.
3. REQUIREMENTS
3.1 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535, appendix A for non-JAN
class level B devices and as specified herein. Product built to this drawing that is produced by a Qualified Manufacturer Listing
(QML) certified and qualified manufacturer or a manufacturer who has been granted transitional certification to MIL-PRF-38535
may be processed as QML product in accordance with the manufacturers approved program plan and qualifying activity approval
in accordance with MIL-PRF-38535. This QML flow as documented in the Quality Management (QM) plan may make
modifications to the requirements herein. These modifications shall not affect form, fit, or function of the device. These
modifications shall not affect the PIN as described herein. A "Q" or "QML" certification mark in accordance with MIL-PRF-38535
is required to identify when the QML flow option is used.
3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in
MIL-PRF-38535, appendix A and herein.
3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.2 herein.
3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1.
3.2.3 Truth table. The truth table shall be as specified on figure 2.
3.2.4 Logic diagram. The logic diagram shall be as specified on figure 3.
3.2.5 Switching waveforms and test circuit. The switching waveforms and test circuit shall be as specified on figure 4.
STANDARD
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
F
77044
SHEET
3










Скачать PDF:

[ 7704402xx.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
7704402xx(77044xxxx) LOGIC GATEIntersil
Intersil

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск