DataSheet26.com

OM7504SC PDF даташит

Спецификация OM7504SC изготовлена ​​​​«ETC» и имеет функцию, называемую «DUAL POSITIVE AND NEGATIVE FIXED VOLTAGE REGULATORS».

Детали детали

Номер произв OM7504SC
Описание DUAL POSITIVE AND NEGATIVE FIXED VOLTAGE REGULATORS
Производители ETC
логотип ETC логотип 

5 Pages
scroll

No Preview Available !

OM7504SC Даташит, Описание, Даташиты
DUAL POSITIVE AND NEGATIVE FIXED
VOLTAGE REGULATORS
Dual 5V, 12V and 15V, 1.5 Amp Fixed
Voltage Regulators In Single Hermetic
MO-078AA Package
OM7500SC
FEATURES
• Positive And Negative Regulators In One Package
• Hermetic 5-Pin Metal Package, JEDEC MO-078AA
• Isolated Case
• Output Voltages 5V, 12V and 15V; Other Voltages Available
• Output Voltages Set Internally To ±2.0%
• Built-In Thermal Overload Protection
• Short Circuit Current Limiting
• Product Is Available Screened To MIL-S-19500, TX, TXV And S Levels
DESCRIPTION
This series of products offers a positive and a negative fixed voltage regulator in one
hermetically sealed, 5 PIN package whose outline is similar to the industry standard
TO-247 package. With heat sinking, they can regulate over 1.5 Amp of output current
per device. Standard voltages are + or - 5V, 12V and 15V. Other voltages are
available upon request. Output voltages are internally trimmed to ±2.0% of nominal
voltage. These devices are ideally suited for Military applications where small size
and high reliability are required.
To order, use the following Omnirel part numbers to determine the required
output voltage of each regulator within one package.
Omnirel
Part Number
OM7501SC
OM7502SC
OM7503SC
OM7504SC
OM7505SC
OM7506SC
OM7507SC
OM7508SC
OM7509SC
Output Voltages
Positive Negative
+5V -5V
+5V -12V
+5V -15V
+12V
-5V
+12V
-12V
+12V
-15V
+15V
-5V
+15V
-12V
+15V
-15V
PIN CONNECTION
1 2 3 45
Pin 1: + Input
Pin 2: + Output
Pin 3: Common
Pin 4: - Input
Pin 5: - Output
3.3
4 11 R4
Supersedes 1 07 R3
3.3 - 121









No Preview Available !

OM7504SC Даташит, Описание, Даташиты
OM7500SC
3.3
INDIVIDUAL POSITIVE REGULATORS
ELECTRICAL CHARACTERISTICS +5 Volt VIN = 10V, Io = 500mA, -55°C TA 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
Min. Max. Unit
Output Voltage
Line Regulation
(Note 1)
VOUT
VRLINE
TA = 25°C
VIN = 7.5V to 20V
VIN = 7.5V to 20V
4.92 5.08
V
4.85
5.15
V
5 mV
12 mV
VIN = 8.0V to 12V
4 mV
10 mV
Load Regulation
(Note 1)
VRLOAD
IO = 5mA to 1.5 Amp
12 mV
25 mV
IO = 250mA to 750 mA
6 mV
15 mV
Standby Current Drain
Standby Current Drain
Change With Line
Standby Current Drain
Change With Load
ISCD
DISCD
(Line)
DISCD
(Load)
VIN = 7.5V to 20V
IO = 5mA to 1000mA
6 mA
6.5 mA
0.8 mA
0.5 mA
Dropout Voltage
Peak Output Current
Short Circuit Current
(Note 2)
VDO
IO (pk)
IDS
TA = 25°C, DVOUT = 100mV, IO = 1.0A
TA = 25°C
VIN = 35V
1.5
2.5
3.3
1.2
2.8
V
A
A
A
Ripple Rejection
Output Noise Voltage
(Note 3)
DVIN
DVOUT
NO
f =120 Hz, DVIN = 10V
(Note 3)
TA = 25°C, f =10 Hz to 100KHz
66
60
dB
dB
40 µV/V
RMS
Long Term Stability
(Note 3)
DVOUT
Dt
TA = 25°C, t = 1000 hrs.
75 mV
ELECTRICAL CHARACTERISTICS +12 Volt VIN = 19V, Io = 500mA, -55°C TA 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
Min. Max. Unit
Output Voltage
Line Regulation
(Note 1)
VOUT
VRLINE
TA = 25°C
VIN = 14.5V to 27V
VIN = 14.5V to 27V
11.88
11.64
12.12
12.36
18
50
V
V
mV
mV
VIN = 16V to 22V
9 mV
30 mV
Load Regulation
(Note 1)
VRLOAD
IO = 5mA to 1.5 Amp
32 mV
60 mV
IO = 250mA to 750 mA
20 mV
40 mV
Standby Current Drain
ISCD
6.0 mA
6.5 mA
Standby Current Drain
DISCD
VIN = 15V to 30V
0.8 mA
Change With Line
(Line)
Standby Current Drain
DISCD
IO = 5mA to 1000mA
0.5 mA
Change With Load
(Load)
Dropout Voltage
VDO
DVOUT = 100mV, IO = 1.0A
2.5 V
Peak Output Current
IO (pk)
TA = 25°C
1.5 3.3
A
Short Circuit Current
(Note 2)
IDS
VIN = 35V
1.2 A
2.8 A
Ripple Rejection
Output Noise Voltage
(Note 3)
DVIN
DVOUT
NO
f =120 Hz, DVIN = 10V
(Note 3)
TA = 25°C, f =10 Hz to 100KHz
61
54
dB
dB
40 µV/V
RMS
Long Term Stability
(Note 3)
DVOUT
Dt
TA = 25°C, t = 1000 hrs.
120 mV
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. Short Circuit protection is only assured up to VIN = 35V.
3. If not tested, shall be guaranteed to the specified limits.
The • denotes the specifications which apply over the full operating temperature range.
3.3 - 122









No Preview Available !

OM7504SC Даташит, Описание, Даташиты
OM7500SC
ELECTRICAL CHARACTERISTICS +15 Volt VIN = 23V, Io = 500mA, -55°C TA 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
Min. Max. Unit
Output Voltage
Line Regulation
(Note 1)
VOUT
VRLINE
TA = 25°C
VIN = 18.5V to 30V
VIN = 17.5V to 30V
14.8 15.2
V
14.6
15.4
V
20 mV
50 mV
VIN = 20V to 26V
15 mV
25 mV
Load Regulation
(Note 1)
VRLOAD
IO = 5mA to 1.5 Amp
IO = 5mA to 1.0 Amp
IO = 250mA to 750 mA
35 mV
75 mV
21 mV
45 mV
Standby Current Drain
Standby Current Drain
Change With Line
Standby Current Drain
Change With Load
ISCD
DISCD
(Line)
DISCD
(Load)
VIN = 18.5V to 30V
IO = 5mA to 1000mA
6.0 mA
6.5 mA
0.8 mA
0.5 mA
Dropout Voltage
Peak Output Current
Short Circuit Current
(Note 2)
VDO
IO (pk)
IDS
TA = 25°C, DVOUT = 100mV, IO = 1.0A
TA = 25°C
VIN = 35V
1.5
2.5
3.3
1.2
2.8
V
A
A
A
Ripple Rejection
Output Noise Voltage
(Note 3)
DVIN
DVOUT
NO
f =120 Hz, DVIN = 10V
(Note 3)
TA = 25°C, f =10 Hz to 100KHz
54
52
dB
dB
40 µV/V
RMS
Long Term Stability
(Note 3)
DVOUT
Dt
TA = 25°C, t = 1000 hrs.
150 mV
ELECTRICAL CHARACTERISTICS -5 Volt VIN = -10V, Io = 500mA, -55°C TA 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
Min. Max. Unit
Output Voltage
Line Regulation
(Note 1)
VOUT
VRLINE
TA = 25°C
VIN = -7.5V to -20V
VIN = -7.5V to -20V
-4.95
-4.85
-5.05
-5.15
12
25
V
V
mV
mV
VIN = -8.0V to -12V
5 mV
12 mV
Load Regulation
(Note 1)
VRLOAD
IO = 5mA to 1.5 Amp
20 mV
25 mV
IO = 250mA to 750 mA
15 mV
30 mV
Standby Current Drain
ISCD
2.5 mA
3.0 mA
Standby Current Drain
DISCD
VIN = -7.0V to -20V
0.4 mA
Change With Line
(Line)
Standby Current Drain
DISCD
IO = 5mA to 1000mA
0.4 mA
Change With Load
(Load)
Dropout Voltage
VDO
DVOUT = 100mV, IO = 1.0A
2.5 V
Peak Output Current
IO (pk)
TA = 25°C
1.5 3.3
A
Short Circuit Current
(Note 2)
IDS
VIN = -35V
1.2 A
2.8 A
Ripple Rejection
Output Noise Voltage
(Note 3)
DVIN
DVOUT
NO
f =120 Hz, DVIN = -10V
(Note 3)
TA = 25°C, f =10 Hz to 100KHz
63
60
dB
dB
40 µV/V
RMS
Long Term Stability
(Note 3)
DVOUT
Dt
TA = 25°C, t = 1000 hrs.
75 mV
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. Short Circuit protection is only assured up to VIN =+35V, positive regulator; .VIN = -35V, negative regulator.
3. If not tested, shall be guaranteed to the specified limits.
The • denotes the specifications which apply over the full operating temperature range.
3.3 - 123
3.3










Скачать PDF:

[ OM7504SC.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
OM7504SCDUAL POSITIVE AND NEGATIVE FIXED VOLTAGE REGULATORSETC
ETC

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск