DataSheet26.com

MAX7404 PDF даташит

Спецификация MAX7404 изготовлена ​​​​«Maxim Integrated» и имеет функцию, называемую «8th-Order / Lowpass / Elliptic / Switched-Capacitor Filters».

Детали детали

Номер произв MAX7404
Описание 8th-Order / Lowpass / Elliptic / Switched-Capacitor Filters
Производители Maxim Integrated
логотип Maxim Integrated логотип 

12 Pages
scroll

No Preview Available !

MAX7404 Даташит, Описание, Даташиты
19-4764; Rev 2; 6/99
8th-Order, Lowpass, Elliptic,
Switched-Capacitor Filters
General Description
The MAX7400/MAX7403/MAX7404/MAX7407 8th-order,
lowpass, elliptic, switched-capacitor filters (SCFs) oper-
ate from a single +5V (MAX7400/MAX7403) or +3V
(MAX7404/MAX7407) supply. These devices draw 2mA
of supply current and allow corner frequencies from
1Hz to 10kHz, making them ideal for low-power anti-
aliasing and post-DAC filtering applications. They fea-
ture a shutdown mode that reduces the supply current
to 0.2µA.
Two clocking options are available: self-clocking
(through the use of an external capacitor) or external
clocking for tighter cutoff-frequency control. In addition,
an offset adjustment pin (OS) allows for the adjustment
of the DC output level.
The MAX7400/MAX7404 provide 82dB of stopband
rejection and a sharp rolloff with a transition ratio of 1.5.
The MAX7403/MAX7407 provide a sharper rolloff with a
transition ratio of 1.2, while still delivering 60dB of stop-
band rejection. The fixed response of these devices
simplifies the design task to corner-frequency selection
by setting a clock frequency. The MAX7400/
MAX7403/MAX7404/MAX7407 are available in 8-pin SO
and DIP packages.
ADC Anti-Aliasing
Post-DAC Filtering
CT2 Base Stations
Applications
Speech Processing
Air-Bag Electronics
Typical Operating Circuit
VSUPPLY
0.1µF
INPUT
CLOCK
VDD SHDN
IN OUT
MAX7400
MAX7403
CLK
MAX7404
MAX7407
COM
OS
GND
OUTPUT
0.1µF
Features
o 8th-Order Lowpass Elliptic Filter
o Low Noise and Distortion
-82dB THD + Noise (MAX7400)
o Clock-Tunable Corner Frequency (1Hz to 10kHz)
o 100:1 Clock-to-Corner Ratio
o Single-Supply Operation
+5V (MAX7400/MAX7403)
+3V (MAX7404/MAX7407)
o Low Power
2mA (Operating Mode)
0.2µA (Shutdown Mode)
o Available in 8-Pin SO and DIP Packages
o Low Output Offset: ±5mV
Ordering Information
PART
TEMP. RANGE PIN-PACKAGE
MAX7400CSA
0°C to +70°C
8 SO
MAX7400CPA
0°C to +70°C
8 Plastic DIP
MAX7400ESA
-40°C to +85°C
8 SO
MAX7400EPA
-40°C to +85°C
8 Plastic DIP
Ordering Information continued at end of data sheet.
Selector Guide
PART
MAX7400
MAX7403
MAX7404
MAX7407
FILTER RESPONSE
Elliptic (r = 1.5)
Elliptic (r = 1.2)
Elliptic (r = 1.5)
Elliptic (r = 1.2)
OPERATING
VOLTAGE (V)
+5
+5
+3
+3
TOP VIEW
Pin Configuration
COM 1
IN 2
GND 3
VDD 4
MAX7400
MAX7403
MAX7404
MAX7407
8 CLK
7 SHDN
6 OS
5 OUT
SO/DIP
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.









No Preview Available !

MAX7404 Даташит, Описание, Даташиты
8th-Order, Lowpass, Elliptic,
Switched-Capacitor Filters
ABSOLUTE MAXIMUM RATINGS
VDD to GND
MAX7400/MAX7403 ..............................................-0.3V to +6V
MAX7404/MAX7407 ..............................................-0.3V to +4V
IN, OUT, COM, OS, CLK ............................-0.3V to (VDD + 0.3V)
SHDN........................................................................-0.3V to +6V
OUT Short-Circuit Duration...................................................1sec
Continuous Power Dissipation (TA = +70°C)
SO (derate 5.88mW/°C above +70°C) ..........................471mW
DIP (derate 9.1mW/°C above +70°C) ...........................727mW
Operating Temperature Ranges
MAX740_C_A .....................................................0°C to +70°C
MAX740_E_A ..................................................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—MAX7400/MAX7403
(VDD = +5V, filter output measured at OUT, 10k|| 50pF load to GND at OUT, SHDN = VDD, OS = COM, 0.1µF from COM to GND,
fCLK = 100kHz, TA = TMIN to TMAX, unless otherwise noted. Typical values are at +25°C.)
PARAMETER
FILTER CHARACTERISTICS
Corner Frequency
Clock-to-Corner Ratio
Clock-to-Corner Tempco
Output Voltage Range
Output Offset Voltage
DC Insertion Gain with
Output Offset Removed
Total Harmonic Distortion
plus Noise
OS Voltage Gain to OUT
Input Voltage Range at OS
COM Voltage Range
Input Resistance at COM
Clock Feedthrough
Resistive Output Load Drive
Maximum Capacitive Load
at OUT
Input Leakage Current at COM
Input Leakage Current at OS
CLOCK
Internal Oscillator Frequency
Clock Input Current
Clock Input High
Clock Input Low
SYMBOL
fC
fCLK/fC
(Note 1)
CONDITIONS
VOFFSET VIN = VCOM = VDD / 2
VCOM = VDD / 2 (Note 2)
THD+N
AOS
VOS
fIN = 200Hz, VIN = 4Vp-p,
MAX7400
measurement bandwidth = 22kHz MAX7403
VCOM
Input, COM externally driven
Output, COM internally biased
RCOM
RL
CL
SHDN = GND, VCOM = 0 to VDD
VOS = 0 to (VDD - 1V) (Note 3)
fOSC
ICLK
VIH
VIL
COSC = 1000pF (Note 4)
VCLK = 0 or 5V
MIN TYP MAX UNITS
0.001 to 10
kHz
100:1
10 ppm/°C
0.25
VDD - 0.25 V
±5 ±25 mV
-0.1 0.15
0.3
dB
-82
-80
1
VCOM ±0.1
VDD / 2
- 0.5
VDD / 2
VDD / 2
+ 0.5
VDD / 2
- 0.2
VDD / 2
VDD / 2
+ 0.2
75 125
10
10 1
dB
V/V
V
V
k
mVp-p
k
50 500
pF
±0.1
±0.1
±10
±10
µA
µA
29 38 48 kHz
±15 ±30 µA
VDD - 0.5
V
0.5 V
2 _______________________________________________________________________________________









No Preview Available !

MAX7404 Даташит, Описание, Даташиты
8th-Order, Lowpass, Elliptic,
Switched-Capacitor Filters
ELECTRICAL CHARACTERISTICS—MAX7400/MAX7403 (continued)
(VDD = +5V, filter output measured at OUT, 10k|| 50pF load to GND at OUT, SHDN = VDD, OS = COM, 0.1µF from COM to GND,
fCLK = 100kHz, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
POWER REQUIREMENTS
Supply Voltage
Supply Current
Shutdown Current
Power-Supply Rejection Ratio
SHUTDOWN
SHDN Input High
SHDN Input Low
SHDN Input Leakage Current
SYMBOL
CONDITIONS
VDD
IDD
I SHDN
PSRR
Operating mode, no load, IN = OS = COM
SHDN = GND, CLK driven from 0 to VDD
Measured at DC
VSDH
VSDL
V SHDN = 0 to VDD
MIN TYP MAX UNITS
4.5 5.5 V
2 3.5 mA
0.2 1 µA
60 dB
VDD - 0.5
±0.1
0.5
±10
V
V
µA
ELECTRICAL CHARACTERISTICS—MAX7404/MAX7407
(VDD = +3V, filter output measured at OUT, 10k|| 50pF load to GND at OUT, SHDN = VDD, OS = COM, 0.1µF from COM to GND,
fCLK = 100kHz, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
FILTER CHARACTERISTICS
Corner Frequency
Clock-to-Corner Ratio
Clock-to-Corner Tempco
Output Voltage Range
Output Offset Voltage
DC Insertion Gain with Output
Offset Removed
Total Harmonic Distortion
plus Noise
OS Voltage Gain to OUT
Input Voltage Range at OS
SYMBOL
fC
fCLK/fC
(Note 1)
CONDITIONS
VOFFSET VIN = VCOM = VDD / 2
VCOM = VDD / 2 (Note 2)
THD+N
AOS
VOS
fIN = 200Hz, VIN = 2.5Vp-p,
MAX7404
measurement bandwidth = 22kHz MAX7407
COM Voltage Range
VCOM COM internally biased or externally driven
Input Resistance at COM
Clock Feedthrough
Resistive Output Load Drive
Maximum Capacitive Load
at OUT
Input Leakage Current at COM
Input Leakage Current at OS
RCOM
RL
CL
SHDN = GND, VCOM = 0 to VDD
VOS = 0 to (VDD - 1V) (Note 3)
MIN TYP MAX UNITS
0.001 to 10
kHz
100:1
10 ppm/°C
0.25
VDD - 0.25 V
±5 ±25 mV
-0.1 0.1 0.3 dB
-79
-77
1
VCOM ±0.1
VDD / 2
- 0.1
VDD / 2
VDD / 2
+ 0.1
75 125
10
10 1
dB
V/V
V
V
k
mVp-p
k
50 500
pF
±0.1
±0.1
±10
±10
µA
µA
_______________________________________________________________________________________ 3










Скачать PDF:

[ MAX7404.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
MAX74008th-Order / Lowpass / Elliptic / Switched-Capacitor FiltersMaxim Integrated
Maxim Integrated
MAX74018th-Order / Lowpass / Bessel / Switched-Capacitor FiltersMaxim Integrated
Maxim Integrated
MAX74038th-Order / Lowpass / Elliptic / Switched-Capacitor FiltersMaxim Integrated
Maxim Integrated
MAX74048th-Order / Lowpass / Elliptic / Switched-Capacitor FiltersMaxim Integrated
Maxim Integrated

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск