|
|
Datasheet MDS80 Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | MDS80 | DIODE / SCR MODULE MDS35 / 50 / 80 Series
DIODE / SCR MODULE
MAIN FEATURES:
Symbol IT(RMS) V DRM/VRRM IGT Value 50-70-85 800 and 1200 50 and 100 Unit A V mA
DESCRIPTION Packaged in ISOTOP modules, the MDS Series is based on the half-bridge SCR-diode configuration. They are suitable for high power applications, using |  ST Microelectronics | diode |
| 2 | MDS80 | Three Phase Bridge Rectifier Naina Semiconductor Ltd.
MDS80
Three Phase Bridge Rectifier, 80 Amps
Features • Easy connections • Excellent power volume ratio • Insulated type
Voltage Ratings (TJ = 25oC unless otherwise noted)
Type number
Voltage code
VRRM, Max. repetitive peak reverse voltage
VRSM, Max. nonrepetitiv |  Naina Semiconductor | rectifier |
| 3 | MDS80-1200 | DIODE / SCR MODULE MDS35 / 50 / 80 Series
DIODE / SCR MODULE
MAIN FEATURES:
Symbol IT(RMS) V DRM/VRRM IGT Value 50-70-85 800 and 1200 50 and 100 Unit A V mA
DESCRIPTION Packaged in ISOTOP modules, the MDS Series is based on the half-bridge SCR-diode configuration. They are suitable for high power applications, using | ST Microelectronics | diode |
| 4 | MDS80-800 | DIODE / SCR MODULE MDS35 / 50 / 80 Series
DIODE / SCR MODULE
MAIN FEATURES:
Symbol IT(RMS) V DRM/VRRM IGT Value 50-70-85 800 and 1200 50 and 100 Unit A V mA
DESCRIPTION Packaged in ISOTOP modules, the MDS Series is based on the half-bridge SCR-diode configuration. They are suitable for high power applications, using | ST Microelectronics | diode |
MDS Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | MDS-148 | Double-Balanced Mixer / 10 - 1500 MHz Double-Balanced Mixer, 10 - 1500 MHz
V 3.00
MD-/MDS-148
Features
n n n n n n
FP-2 (MD-148)
Fully Hermetic Package 1 dB Compression Point: +5 dBm Conversion Loss: 6 dB Typical Midband LO-RF/LO-IF Isolation: 40 dB Typical Midband Impedance: 50 Ohms Nominal Maximum Input Power: 300 mW Max, Derated  Tyco data | | |
| 2 | MDS-148PIN | Double-Balanced Mixer / 10 - 1500 MHz Tyco data | | |
| 3 | MDS-149 | Double-Balanced Mixer / 10 - 1500 MHz Double-Balanced Mixer, 10 - 1500 MHz
V 3.00
MD-/MDS-149
Features
n Over Two-Decade Frequency Range n Conversion Loss: 6 dB Typical Midband n LO-RF Isolation: 40 dB Typical Midband n Fully Hermetic Package n Impedance: 50 Ohms Nominal n Maximum Input Power: 300 mW Max, Derated to 85°C n n
FP-2 ( Tyco data | | |
| 4 | MDS-149PIN | Double-Balanced Mixer / 10 - 1500 MHz
Double-Balanced Mixer, 10 - 1500 MHz
Features
Over Two-Decade Frequency Range Conversion Loss: 6 dB Typical Midband LO-RFIsolation: 40 dB Typical Midband Fully Hermetic Package Impedance: 50 Ohms Nominal Maximum Input Power: 300 mW Max, Derated to 85°C @ 3.2 mW/°C • IF Port Tyco data | | |
| 5 | MDS-169 | Termination Insensitive Mixer / 1 MHz - 3.5 GHz Termination Insensitive Mixer, 1 MHz - 3.5 GHz
V 3.00
MD-/MDC-/MDS-169
Features
n Intermodulation Ratio is Insensitive to Port Mismatches n VSWR: <2.0:1 Typical Midband n Isolation: 35 dB Typical Midband n Impedance: 50 Ohms Nominal n Maximum Input Power: 350 mW Max @ 25°C, Derated n n
FP-2 (MD Tyco data | | |
| 6 | MDS-189 | High Level Termination Insensitive Mixer / 1 - 3500 MHz High Level Termination Insensitive Mixer, 1 - 3500 MHz
V 3.00
MD-/MDS-189
Features
n n n n
FP-2 (MD-189)
Operates Over Full PCN/PCS/PHS/MSS Bands Low Conversion Loss Hermetic Flatpack Package Intermodulation Ratio Insensitive to System Mismatches n VSWR: < 2.0:1 Typical Midband n Isolation: 35 Tyco data | | |
| 7 | MDS-189PIN | High Level Termination Insensitive Mixer / 1 - 3500 MHz
High Level Termination Insensitive Mixer, 1 - 3500 MHz
Features
Operates Over Full PCN/PCS/PHS/MSS Bands Low Conversion Loss Fully Hermetic Package Intermodulation Ratio Insensitive to System Mismatches • VSWR: <2.0:1 Typical Midband • Isolation: 35 dB Typical Midband • Hi Tyco data | |
| Esta página es del resultado de búsqueda del MDS80. Si pulsa el resultado de búsqueda de MDS80 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |