DataSheet26.com

53111-1PA PDF даташит

Спецификация 53111-1PA изготовлена ​​​​«Micropac Industries» и имеет функцию, называемую «POWER MOSFET OPTOCOUPLER».

Детали детали

Номер произв 53111-1PA
Описание POWER MOSFET OPTOCOUPLER
Производители Micropac Industries
логотип Micropac Industries логотип 

11 Pages
scroll

No Preview Available !

53111-1PA Даташит, Описание, Даташиты
53111
POWER MOSFET OPTOCOUPLER,
90 V/1 , Hermetically Sealed,
DSCC Approved 5962-9314001 and 5962-9314002
Mii
MICROCIRCUITS PRODUCTS
DIVISION
Features:
Hermetically Sealed 8-Pin Dual-In-Line
package
Small Size and Weight
Options: 5mA or 10mA input forward current
Performance Guaranteed over –55°C to
+125°C Ambient Temperature Range
AC/DC Signal & Power Switching
Maximum Average Current
AC/DC: 0.8 A
DC only: 1.6 A
1500 VDC Withstand Test Voltage
High Transient Immunity
5 A Output Surge Current
Shock and Vibration Resistant
MIL-PRF-38534 Compliant
Equivalent to HSSR7111/7112
Applications:
Satellite/Space Systems
Military/High Reliability Systems
Standard 28 VDC and 48 VDC Load Driver
Standard 24 VAC Load Driver
AC/DC Electromechanical and Solid State
Relay Replacement
I/O Modules
DESCRIPTION
The 53111 is a single channel, hermetically sealed, power MOSFET optocoupler. Low on-resistance of the
MOSFET output, combined with 1500 VDC isolation between input and output, makes this optocoupler ideal for
solid state relay applications. Operation is specified over the full military temperature range. The part is supplied in
an eight-pin, dual-in-line ceramic package, available as COTS, as fully compliant MIL-PRF-38534 Class H device,
or with custom screening. Lead options support both through-hole and surface-mount assembly. The part is
normally shipped with gold plated leads, but lead finishes per MIL-PRF-38534 are available.
Functionally, the device operates as a single-pole, normally open (1 Form A) solid state relay. The device is
actuated by an input current, which can be supplied from standard logic types such as open-collector TTL. The
input current biases a light emitting diode that is optically coupled to an integrated photovoltaic diode array. The
photovoltaic array powers control circuitry that operates the output MOSFETs.
Optimum switching of either AC or DC loads is provided by a configurable output. For AC loads, connection A in
Figure 1 must be used. Connection A will also switch DC loads but connection B, in Figure 1, provides DC-only
operation with the advantages of substantial reduction in on-resistance and twice the output current capability as
that obtained with connection A.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION 905 E. Walnut St., Garland, TX 75040 (972) 272-3571 Fax (972) 494-2281
www.micropac.com
5/22/02
Pg. 1 of 11









No Preview Available !

53111-1PA Даташит, Описание, Даташиты
53111
Power MOSFET Optocoupler
___________________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
Storage Temperature Range ..................................................................................................................-65°C to +150°C
Operating Ambient Temperature - TA.....................................................................................................-55°C to +125°C
OJupnecrtaiotinngTeCmaspeerTaetumrepe- rTaJtu...r.e...-..T...C............................................................................................................................................................................................................................................+..1..4. 155°C0°(C1)
Lead Solder Temperature (1.6mm below seating plane).......................................................................... 260°C for 10s
Average Input Current - IF ........................................................................................................................................20 mA
Peak Repetitive Input Current - IFpk …(Pulse Width < 100ms; duty cycle < 50%) ...............................................40 mA
Peak Surge Input Current - IFPK surge…(Pulse Width < 0.2ms; duty cycle < 0.1%)........................................ 100 mA
Reverse Input Voltage - VR .................................................................................................................................... 5 V
Average Output Current
Connection A – IO............................................................................................................................................ 0.8 A
Connection B - IO ............................................................................................................................................ 1.6 A
Single Shot Output Current - Figure 4
Connection A - IOpk surge…(Pulse width < 10ms) ............................................................................................. 5 A
Connection B - IOpk surge…(Pulse width < 10ms) ........................................................................................... 10 A
Output Voltage
Connection A - VO ............................................................................................................................ -90 V to +90 V
Connection B - VO ............................................................................................................................... 0
Average Output Power Dissipation - Figure 5 ............................................................................................
V to
800
+90
mW
V
(2)
RECOMMENDED OPERATING CONDITIONS:
PARAMETER
SYMBOL
Input Current (on)
Input Voltage (off)
Operating Temperature
IF (ON)
VF (OFF)
TA
DEVICE
TYPE
-01
-02
All
All
MIN
10
5
0
-55
MAX
20
20
0.6
+125
UNITS
mA
mA
VDC
°C
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION 905 E. Walnut St., Garland, TX 75040 (972) 272-3571 Fax (972) 494-2281
www.micropac.com
5/22/02
Pg. 2 of 11









No Preview Available !

53111-1PA Даташит, Описание, Даташиты
53111
ELECTRICAL SPECIFICATIONS
TA = -55°C to +125°C, unless otherwise specified.
Power MOSFET Optocoupler
Parameter
Sym.
Output Withstand Voltage VO(OFF)
Min.
90
Typ.*
110
Max.
Units
V
Test Conditions
VF = 0.6 V
IO = 10 µA
Notes
Output On-Resistance
(Connection A)
Output On-Resistance
(Connection B)
R(ON)
Output Leakage Current
IO (OFF)
Input Forward Voltage
Input Reverse Breakdown
Voltage
VF
VR
Input-Output Insulation
II-O
1.0
5.0
Turn-On Time
tON
Turn-Off time
tOFF
Output Transient
Rejection
dVO/dt 1000
Input-Output Transient
Rejection
dVI-O/dt 500
0.40
0.12
10-4
1.24
1.25
0.02
1.0
0.25
10
1.7
1.0
6.0
0.25
µA
V
V
µA
ms
ms
V/µs
V/µs
IF = 10 mA (for –01)
IF = 5 mA (for –02)
IO = 800 mA
(pulse duration 30 ms)
IF = 10 mA (for –01)
IF = 5 mA (for –02)
IO = 1.6 A
(pulse duration 30 ms)
VF = 0.6 V
VO = 90 V
IF = 10 mA (for –01)
IF = 5 mA (for –02)
IR = 100 µA
RH 45%, t = 5 s
VI-O = 1500 VDC
TA = 25°C
IF = 10 mA (for –01)
IF = 5 mA (for –02)
VDD = 28 VDC
IO = 800 mA
IF = 10 mA (for –01)
IF = 5 mA (for –02)
VDD = 28 VDC
IO = 800 mA
VPEAK = 50 V
CM = 1000 pF
CL = 15 pF
RM 1 M
VDD = 5 V
VI-O (PEAK) = 50 V
RL = 20 k
CL = 15 pF
3,
Figure
1
4, 5
Figure
6
Figure
6
Figure
7
Figure
8
* All typical values are at TA = 25ºC, IF (ON) = 10 mA (for -01) or 5 mA (for –02), VF (OFF) = 0.6V unless otherwise
specified.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION 905 E. Walnut St., Garland, TX 75040 (972) 272-3571 Fax (972) 494-2281
www.micropac.com
5/22/02
Pg. 3 of 11










Скачать PDF:

[ 53111-1PA.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
53111-1PAPOWER MOSFET OPTOCOUPLERMicropac Industries
Micropac Industries
53111-1PCPOWER MOSFET OPTOCOUPLERMicropac Industries
Micropac Industries

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск